Рет қаралды 9,798
when you first go into scooter hacking utility app will show you INFO; for your first of the 4 screens. When you go into to scooter hacking utility app make sure you enable Bluetooth of course select your scooter you don't need to change too much to be able to flash it if you want to. so basically page one is info only pretty much page 2 is tools that gives you the chance to change the region change & commands & automate.
The next page is the flash page he is very important that you stick to a couple of strict steps I usually go by with the load custom UC that it is one of your options go into load custom install or update shfw it will give you two options regular base 173-v0.3.6 Allianz option 2nd option regular based 187-v0.3.6.
the new press start flash once you've chosen which one of the shfw firmware that you want I have used both at different times.
Then you can go to the configure the fourth part of the scooter hacking utility app the fourth page you go throttle and brake. it has profile editor on profile 1; that's my sports mode all the options you can change are on the configure throttle and brake motor starts to be filled weaken in cruise control mode light using interface global settings which is profile triggers, system settings, wheel size, Hall sensor settings, speed control settings and BMS emulation. on a standard 9 baht Max G30 put in battery capacity 15300mah that's the capacity of an original ninebot Max G30 battery.