Seized Drill Driver Freed Up - Makita DHP458

Seized Drill Driver Freed Up - Makita DHP458 - Jammed Chuck & Gearbox

Рет қаралды 57,116

3 жыл бұрын

Two battery and charger set: amzn.to/3Nas53U
Bare unit: amzn.to/3x5KqJS
In this video I buy a Makita DHP458 combi drill with a drill bit jammed in the chuck and a seized up gearbox. It proves remarkably easy, if a little time comsuming to fix.
• Seized Drill Driver Fr...
Please have a look at some of my other films.
www.shedtv.net
I am not aware of any copyright or any other rule infringement on my channel. If, however, you are aware of any, please contact me.

Пікірлер: 77

@jameselliott8152 Жыл бұрын

Thank you. Great video. I was given a Makita drill by my tradie son in the same state as yours - jammed chuck with drill bit stuck. I followed the same process as you, fixed it in 5 mins and now have a new drill. Cheers - James

@NomadicSheep01 2 жыл бұрын

To repeat most of the comments in this video, THANK YOU lol thanks for saving me my grandads drill (inherited) and my uncle's drill bit. Very happy DIY'er

@ShedTV 2 жыл бұрын

Thanks! Glad you got it sorted.

@peppereggfuk 3 жыл бұрын

Cheers Buddy , Just freed up my Makita HP457D chuck watching your video.... super happy. thanks for the vid

@ShedTV 3 жыл бұрын

Thanks mate, glad you're sorted.

@richardhume2811 Жыл бұрын

Bought a second hand DHP458 combi drill (2019) as part of a set of tools. The chuck was jammed solid. Watching your video gave me the confidence to get it working again with lots of penetrating oil and a good set of mole grips. Thank you.

@ShedTV Жыл бұрын

Nice one, thanks!

@alfredcalleja450 5 ай бұрын

I did the same as you except I put the handle side of the drill on the bench and used the bench to stop the drill from rotating: not my hands and arms. It worked a charm.

@ShedTV 5 ай бұрын

Yes, far more sensible!

@willemvanderschyff8766 3 жыл бұрын

Thank you for the video. It helped me to loosen my drill chuck, saved me a chunk of money. I had to sacrifice a 6.5mm titanium drillbit, but that is a small price to pay.

@ShedTV 3 жыл бұрын

Fantastic. I'm pleased that it helped you.

@dadygee Жыл бұрын

I filled my chuck with WD 40 and left it over night.. Then used a hose clamp to fix it to the vice. Working with exhaust pipes taught me a thing or two about oval shaped stuffings that should be round..

@jessicardenas4460 2 жыл бұрын

Thank you!! I was just about to give up before watching your video and it helped! I was able to have the confidence to twist by hand and I unjammed it! I was previously scared I would break it lol 🙃 Thank you!

@paularnold5108 Жыл бұрын

You just helped me save my beloved Makita combi cheers

@ShedTV Жыл бұрын

That's great! Cheers mate!

@x-armysarge 3 жыл бұрын

Thanks didn't have a vice but a buddy and vice grips really tight worked. We didn't have oil so we used dish soap which worked. A week later remembered to get some wd40 and the drill works great now. Look for the next episode of this old drill.....

@ShedTV 3 жыл бұрын

Excellent! Cheers!

@nancyhill1566 8 ай бұрын

Thank you- I had the tiniest bit stuck in mine, and was terrified of breaking it off before I could get it out!

@ortizmoon 11 ай бұрын

thanks from Russia, very helpfull🎉

@ShedTV 11 ай бұрын

Спасибо 👍

@lalomoon227 Жыл бұрын

Was going to buy new drill until I saw your video. Got it working like it did again. Thanks for the video..👍🏽

@ShedTV Жыл бұрын

Result!

@peterhaan9068 3 жыл бұрын

Well the laugh is on the jerk that threw the drill away thinking it was no good! Good job and have a Happy New Year!

@ShedTV 3 жыл бұрын

Thanks. To be fair to the person, I've got the spare time and my time dosen't cost me anything; they might have been on a deadline for a customer.

@brianspencer6397 2 жыл бұрын

Quite possibly the original owner thought it was a good excuse to upgrade to a newer model......

@chatteyj Жыл бұрын

@@brianspencer6397 Yeah a brushless one perhaps.

@alant5335 3 жыл бұрын

Good job done in this throw away society that we're in.

@ShedTV 3 жыл бұрын

Thank you, I enjoyed doing it. To be fair to the person who gave up though, it was probably a tool of their trade; where time is money.

@rishaalramdeen2112 3 жыл бұрын

As in life, perseverance is key. Well done

@ShedTV 3 жыл бұрын

Haha, thanks. It might well be, in life; I’m not sure it was with this bloody drill!

@garyshaw2940 3 ай бұрын

Brilliant this is what you tube is for 😊

@richardcooper9167 2 жыл бұрын

You beauty! Helped me out a treat with identical problem. Thank you cheif.

@ShedTV 2 жыл бұрын

Fantastic. Thanks mate!

@diquadhumungersaur492 9 ай бұрын

before watchvid i have a mak DHP81(basicslly same as on video) with locked up chuck ,bit stuck in to.. :-) my sons from work,i always get the "dad,can you have ago everybody else has tried and failed.." .. "of course son"" and onto youtube.. if helps me sort it then you sir will become an instant hero and in my damn good books forever

@diquadhumungersaur492 9 ай бұрын

mind you the one i have here is jammedup,no movement of chuck so may be gearbox stuck..

@hildabayena224 2 жыл бұрын

you deserve to be admired

@ShedTV 2 жыл бұрын

Not quite sure what to say. Thank you.

@daveoseas Жыл бұрын

I was told by a person in the know, that the way to stop this happening is to gently, (when drill works fine) spin it to full open, and full close. No full spin to full ooen, full closed...

@noonereally9946 3 жыл бұрын

Thank you for this. Cheers mate

@ShedTV 3 жыл бұрын

Cheers!

@simonhallam7709 Жыл бұрын

THANKS THIS REALLY HELPED

@ShedTV Жыл бұрын

Happy days! Cheers.

@SausageSpeaks 2 жыл бұрын

Youre a savior, thank you kindly!

@ShedTV 2 жыл бұрын

Very kind. Thanks!

@olivei2484 3 жыл бұрын

Nice! I have a drill in a similar state, I think I will give this a go. Maybe brace against bench to preserve wrists, that can be painful.

@ShedTV 3 жыл бұрын

Yes indeed, it's quite tricky to feather the trigger with the whole drill moving in your hand. I cut out the swearing!

@olivei2484 3 жыл бұрын

@@ShedTV lol

@lantechbd 3 жыл бұрын

Thank you! Helped!

@ShedTV 3 жыл бұрын

Great. Glad you found it useful.

@chatteyj Жыл бұрын

I've got a similar makita drill and its jammed in only 8 months of use, I'm not impressed, unless I am misusing it somehow I don't expect this. But will try some of what you did here tomorrow, thanks for the video. I subbed btw as good video and like the channel name.

@ShedTV Жыл бұрын

Thanks mate. You get a one year warranty from Makita and a three year warranty if you registered your purchase. So send it back!

@jcderby129 Жыл бұрын

Cracking vid thanks. Had the same issue just, the same model, but plastic coated chuck. Managed to get bit out and able to tighten and loosen chuck by hand now mostly without horrible noise, however still seems to snatch at end then difficult to move. Also the chuck seems to run on and the jaws open or close, which is obviously not clever! Any hints or tips on that please?

@ShedTV Жыл бұрын

Thank you. If it was doing that clicky grinding noise it may have jumped a tooth and now one jaw is slightly out of line. To be honest at this stage I'd buy a new chuck, they're not too expensive. See my video on chuck replacement for help if you need it. kzfaq.info/get/bejne/a7iTm7Rhm5zDqYU.html

@cgriezy1067 Жыл бұрын

great video, just one question, my drill is a ryobi 2021 model which is pretty newish, i have the same problem but it has a hexagon shaped screwdriver bit stuck in it, any tips on how i can get it out?

@ShedTV Жыл бұрын

Thanks. Tricky one, I would try gripping the bit in the vice, holding the body of the drill in one hand while pulling away from the vice, then try rocking the chuck forwards and back by hand. It might just free off, but mind you don't go flying backwards!

@mikemagan2459 7 ай бұрын

Careful with the wrist mate, drinking Carling cans with the left hand is not as satisfying. Great Vid.

@ShedTV 7 ай бұрын

It feels like it's someone else.

@melvilleize Жыл бұрын

One of the three tynes in the chuck worked its way out,is the drill ratshit now ? In trying to remove the chuck on my identical drill I got the screw out, put a lrg allen key in the chuck but it just keeps ratchetting and not unscrewing from shaft. Any help there?please.

@ShedTV Жыл бұрын

Ratshit. I see what you did there 🤣 I've not sucessfully relocated the jaws, they usually move because they're worn on the back edge, so they'll jump again ever if you do get it together. I made another video where I go through the whole chuck removal and replacement process in detail: kzfaq.info/get/bejne/a7iTm7Rhm5zDqYU.html

@luizmarcelolopesnakada820 Жыл бұрын

Thank you very much, saved my wallet!!!

@user-2uf2kr2c 2 жыл бұрын

Hello, do you have a link to these drills and how much did you pay for it? Regards

@ShedTV 2 жыл бұрын

Hi There's a bare unit available for about £65 here: amzn.to/3x5KqJS or a set here: amzn.to/3Nas53U Cheers.

@martinallaire9488 5 ай бұрын

My chuck on this drill has always beem difficult to open and close with bare hands or gloves. I will bring it under warranty, hoping it is still valid.

@ShedTV 5 ай бұрын

Always worth spaying a bit of lubricant in and running it back and to a few times.

@martinallaire9488 5 ай бұрын

I will do that... but now its stuck in the "small bit" position and wont turn back. I guess its been short on lube since the start... my chuck shows marks of pliers to hold it still, like the ones on the video. I had to use a plier on it out of the box.

@bonniej2609 3 жыл бұрын

9,447 Views - 26 COMMENTS😒 PEOPLE JIST NEVER TAKE THE TIME TO SAY **THANKS**!! (I've been around tools my whole life*seriously- my Stroller had a Curtain Draped over it in my dads Garage while my mom masked off cars for him to paint, and I married a Gear Head)😂 - So THIS Damn Drill STUMPED ME!! I was gettin a lil bunched in the panties!!!😡 - This "work it" worked. I also used my Air Chuck to blow it out, and Lil Shop Vac to Suck any lil debris out! --- ITS HAMMER DRILL TIME! 👍

@samantha9313 3 жыл бұрын

I got a new makita drill and the chuck is clicking and basically stuck so I cant open it to put in a drill bit. I will spray with WD40 and try to move it.

@ShedTV 3 жыл бұрын

If it’s new I’d take it back to where you bought it.

@unshackledsailing950 3 жыл бұрын

I just had the same problem, basically new Makita DHP458 (immaculate still) and i couldnt release the drill bit. This video enabled me to get it out, thanks! I always tighten and release the bits just by holding the chuck and torqueing it on the trigger on screwdriver setting, didnt realise you can just turn the chuck by hand! (9:54 in the video), first attempt it released!

@ShedTV 3 жыл бұрын

@@unshackledsailing950 That’s good. I think what can happen with the big metal chucks is that they make little grooves on the bit, this makes it harder to realise.