Seller Didn't Want To Sell Me This $350 Barn Find Mini Enduro (Sitting 20+ Years)
Рет қаралды 157,536
4 ай бұрынI buy a 1975 Yamaha GT80 that has been sitting in a barn for 20+ years.
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
@Mister-Whiskers 3 ай бұрын
Am I the only one who can smell the 2 stroke smoke whenever he fires one of these vintage bikes up?? Brings me right back the the 70s and 80s tearing up the streets and trails of NJ.
@bleakyfinder2692 3 ай бұрын
I thought it was only me, thanks for the confirmation Whiskers.
@transmitterguy478 3 ай бұрын
Me too, tearing up the streets of Clearfield, PA.
@frankwilliams2198 3 ай бұрын
It was a 4 speed
@ricksmith4736 3 ай бұрын
Klotz 2 stroke oil smelled the best
@thegreenman2030 3 ай бұрын
I tested positive for Mesothelioma right after watching this video.
@josephlemieux5981 3 ай бұрын
I started riding in the early 70’s on Suzuki tm75, moved up to the tm125 and my last bike was the pe250. I truly miss those early years!
@billycapshew2411 3 ай бұрын
I rode a PE 500 it was a beast would stand straight up when you hit 5th gear
@MegaDirtyberty 3 ай бұрын
My last bike was also a PE250, awesome bike.
@UNCLEBGA 3 ай бұрын
Early 80s z50, mx80, ke175, cm250, cb650, wr250, KTM 250. The z gave me 162 stitches and the ke took my finger nail
@MegaDirtyberty 3 ай бұрын
@@UNCLEBGA KV100, KL250. Was always meaning to get another bike but life gets away on you, maybe when I retire I will get another.
@southwestcatfishsquad7347 3 ай бұрын
I have a TM 75 in my garage right now
@charlesgraham9954 3 ай бұрын
BRO, i had that very bike in 75 when i was 6 years old. i had to stand on a crate to get on and ride, or run alone side and jump on, also had to mod the clutch by lengthening it because i wasn't strong enough to pull at 6. thank u for the time. the memory and the video
@ghpjerry 3 ай бұрын
My older brother had a TS185 that I would sneak out from time to time if my bike was down...I had to do the same type things to ride it, coming to a stop was always a planned thing up against something or like you, jumping on or off while moving. Those were the days! I found out when we got older that he knew when I rode it but didn't care. lolol
@smarttechbuybacks 3 ай бұрын
Double sided finger nail file works great for cleaning the points. Sometimes you have to trim the pointy tip back.
@tonymatthew9659 3 ай бұрын
I steal my lady friends double sided emery boards... Im always in the dog box .... but my repairs are more important than her nails 🤣🤣🤣
@allan9603 3 ай бұрын
Jade told Joe the next time he uses her nail files to hone down points, she will have Vinny bite his fingers off😅😊😂
@geraldtakala1721 3 ай бұрын
Buy a points file
@allan9603 3 ай бұрын
@@geraldtakala1721 10 cent Dollar General Emory board does the trick. Lasts forever.
@MrColdwatercanyon 3 ай бұрын
Do two strokes have points ? Lol
@jeffmckc2081 3 ай бұрын
I love your video's,,,, but will never understand not pressure washing them before you start to lesson the contamination of the work you do to them. A little NAPA Aluminum Brightener does wonders on Old stuff too.
@truckergare 3 ай бұрын
Wash it then work on it. : ) Soak a tank in vinegar for about a week, no rust.
@aeroman5239 3 ай бұрын
Nah, he doesn't listen. Heck, he doesn't even read the comments (maybe Johnny can't read?)
@bleakyfinder2692 3 ай бұрын
@@aeroman5239 its Joe.
@JoeTheBlacksmith13 3 ай бұрын
Yep. So much nicer to work on a clean bike… and better in every way.
@cliffordmarkell40 3 ай бұрын
Motorcycle runs like shit
@Farnorthfarmer 3 ай бұрын
My leg got tired
@stevetrepanier4351 2 ай бұрын
Brings back memories! I had a 1977 my dad and i fixed up together when i was kid
@frankroden8233 3 ай бұрын
I had the same bike...My 1st bike and learned how to rebuild a engine, at the age of 14. And the motorcycle fever kicked in. I had built many bikes ....Nice FIND !!!
@user-uq4wt2cd5c 3 ай бұрын
I always let things slide. You are a good mechanic. It killed me when you tried to take off that gas cap! Slip joint pliers (channel locks) are directional pliers! I kept on saying no, no, no! It will jack up any surface if used the wrong way! Keep up the good work!
@scottcazelot4663 3 ай бұрын
I was saying to myself...for the love of plant operators everywhere please turn the channel locks around JJEZZZZ LOL
@Richard_Gobbler 3 ай бұрын
He does it on purpose to get people to engage in the comments. Helps the algorithm promote the video
@JohnDoeEagle1 3 ай бұрын
Should have used a rubber strap wrench instead of channel locks. No damage and it would have gripped and worked much better. NEVER go at things like that metal gas cap (all original) with aggressive tools.
@RonaldDaub-xi5jz 2 ай бұрын
Let's see if it's kicks over pretty smooth
@RonaldDaub-xi5jz 2 ай бұрын
You don't need a battery on it Einstein
@GNX157 3 ай бұрын
The Yamalube oiling system was only a source of engine failure when you forgot to put oil in the tank!
@jimbaludey3935 3 ай бұрын
I was just thinking that. I have owned like 8 bikes with the yamalube system and all work great
@peaceprayer595 3 ай бұрын
I politely but heartily disagree. We did live in upstate NY, so this could have been a factor. The only people with blown engines were those who left this system in operation. I let the dealership talk me into keeping it hooked up on my 433 and it failed. Not the GT80, not the DT125, Not the 175 and not the 400. 32:1 and you never had an issue.
@GNX157 3 ай бұрын
@@peaceprayer595 I had it on my GT80 and Yam RD400 Daytona Special. Both never a problem.
@peaceprayer595 3 ай бұрын
where did you live at the time?@@GNX157
@motov8-garage832 3 ай бұрын
Kinda off topic and a random thought, but would bypassing that pump like he did cause the pump to burn up? No oil flow, then seems it would build some pressure blocked off like that.. I've only delt with 2 stroke oil injection on old polaris quads, never seen one fail on those.
@user-hj5ml8rr8u 3 ай бұрын
figures... sitting 20 years and it fires right up with a little TLC ... i get them and have to rebuild everything ...
@allenweese5544 3 ай бұрын
I’m not a motorcycle guy, but I sure enjoy watching you troubleshoot a repair these machines
@2216sammy 3 ай бұрын
It's a Yamaha , that's why they have stellar reputations.
@dylantolo 3 ай бұрын
I had 7 GT80 / DT80's, it seems that almost all of them ended up having bad crank seals from age causing them to either have an air leak and rev to the moon or suck all the trans fluid into the combustion. But these things are actually pretty quick when they are dialed in!
@davesexton6395 3 ай бұрын
Flip those channel locks next time for a better bite. Common mistake using them backwards
@jeffmckc2081 3 ай бұрын
On any Plier or Crescent Wrench, apply pressure to the fixed side of the jaw when possible.
@92xl 3 ай бұрын
The number of KZfaqrs who use their channel locks backwards is almost embarrassing.
@mbjeep7 3 ай бұрын
I had to stop the video to say the same thing. but I saw your comment...
@user-ik4fd9ny4b 3 ай бұрын
@@mbjeep7 Me too. I'm like, "you've got them backwards".
@brettfinley5158 3 ай бұрын
I just cringed when they were applied to that cap.
@FourIntoOne 3 ай бұрын
Whatever you do, do not clean anything before you dismantle it, do not clean any used parts etc before you reassemble it, always re-use old toasted gaskets, alway use too much rtv on you toasted gaskets, make sure you dig around and scratch up inside the carb and petcock with a screwdriver and always always use your tools incorrectly. 👍
@jeremyhoffmaster 3 ай бұрын
You forgot to say rev the piss out of on first cold start! 😂
@wisecampmotorcycles8258 3 ай бұрын
And you forgot, doesn't answer comments, doesn't listen to advice, probably doesn't even read comments, and has a hundred ads on each video
@TruckingCarsL48 3 ай бұрын
@@wisecampmotorcycles8258 AND YET, you are all here watching and he is cashing your checks! DUDE is a genius!!
@meeeoooow 3 ай бұрын
@@wisecampmotorcycles8258ditto
@Richard_Gobbler 3 ай бұрын
Yet you idiots still watch and comment which helps youtube promote his trash videos 🤦♂️
@SleepyBoBos 3 ай бұрын
Watching you grab that cap with the multi grips made me cry :)
@buaidhnobas1ify 3 ай бұрын
I bring Lawnmowers back to life in the same manner. Spark first, then the rest. I use carb spray down its intake to get it to spark. If it starts and dies, it's a doable fix. All in all, this is how I work on old equipment. No ether, just carb spray. I need to ditch the mowers and go back to bikes. To me, this is fun. Nice work.
@LeviB-rr8ij 3 ай бұрын
Same here
@rodneysmart9774 3 ай бұрын
me too, it's mower season here, I did two in the past two days. My neighbors pay me in home canned food and baked goods, I'm coming out way ahead.
@joelwatson3045 3 ай бұрын
Love your videos but would really enjoy them more if you cleaned up these bikes before you started working on them. I have worked on motorcycles as a hobbly for 50 years and have always found it more enjoyable and easier to work on a clean bike. Also, as a viewer, it's always great to see what a barn find bike looks like under all that dirt!
@higheriam 3 ай бұрын
Lots of clues in that dirt. Tells the tale, follow the trail. Restoration is more than shine.
@davessparetime83 3 ай бұрын
I ran my 1970s Yamaha Enduros without the battery. Battery are for the lights. If you don't use gages or lights the battery isn't needed. One screw holds the Silencer pipe in. Take it out and clean it.
@peaceprayer595 3 ай бұрын
Agreed! We ALWAYS disconnected the Autolube. 32:1 and you never had an issue. Dealership talked me into leaving it hooked up on my 433 snomobile and I didn't even get two months before it blew. Yes, we made certain there was oil in the tank.
@RonaldDaub-xi5jz 2 ай бұрын
He should know that's a magneto unless he just doesn't figure things out which I don't think he does
@RonaldDaub-xi5jz 2 ай бұрын
He cleans the punch and then puts a battery on it which it doesn't need to fire what a fool
@RonaldDaub-xi5jz 2 ай бұрын
But you broke it Joe
@RonaldDaub-xi5jz 2 ай бұрын
The seventies and eighties Yamaha enduros all the way up 9o 100 125 without electric start. 175 250 Enduro 360 Enduro none of them needed a battery to run that's called a battery and coil ignition and this little bike doesn't have it The early 125 had a electric start Dynamo that was 12volt
@LS-tv1cm 3 ай бұрын
I had a '74 TY80 as a kid.. white with yellow trim, pretty much same engine and oiler situation. My buddy had an XR 75 and I dug the look of the high front fender so I "modded' mine and thought it looked a lot cooler. Did a lot of wrenching on that bike and learned a ton. Seeing and hearing this bike brought back all those memories and how much fun we had rippin' around the apple orchards in the Northern California wine country!! I dig this guy's channel and how he likes and respects these old gems
@kevinburke9111 3 ай бұрын
My best friend had the Honda xr75 also. We were like 11 years old. I loved that bike😊
@DanDan-jc3it 3 ай бұрын
I bought my son a TY80 for his seventh birthday, two actually because I never knew if he wanted to ride. I let him ride one as a field bike to see if liked it but made the first immaculate. That thing is now nearly the price of his first road bike ten years later. I’m 6’4” and still ride the field bike for a chuckle. It was my first trials bike at 7 years old so I’m trying to stay young. Ours in the U.K. were white although we got a lot of US imports in junior trials that were yellow.
@LS-tv1cm 3 ай бұрын
That's really cool that you still have those. I realize now what a piece of art they are in their natural state. Wish I still had mine! Cheers mate!@@DanDan-jc3it
@adriantowe278 3 ай бұрын
I had a ty80 as a kid too it was my first bike with gears I keep thinking of getting one just because it reminds me of my childhood
@kellykirby8857 3 ай бұрын
This was my first motorcycle. It was a present for my 8th birthday. I finally let it go 20 yrs later,and regretted it. These bikes would run, no matter the lack of maintenance.
@jetstreek17 3 ай бұрын
Sorry you are sick Joe.. Take a couple days off with pay dude, you deserve it. Love the old bikes. Thanks for letting us hang out with you today.
@GNX157 3 ай бұрын
I really appreciate the jump cuts to the finished carb and being installed. I fast forward thru so much of your videos because it’s tedious and I don’t need to see it over and over.
@jasonfelty3531 3 ай бұрын
Claw hammers, chanel locks and vice grips....joe has it all the groovy tools. This guy teaches with basic hand tools....love it
@trickedouttech321 3 ай бұрын
why does this guy never take these machines to the car wash first? so annoying, lmao
@piersmadan3815 3 ай бұрын
I know right
@kevins4229 3 ай бұрын
I like your videos, but DUDE, you repeat yourself so often it's frustrating. We get it, the points are opening and closing, we don't need to hear it 5 times!
@robcossin4690 3 ай бұрын
Perfect video for me, I learned to ride on a '76 Yamaha 80, my dad still has it, now I want to get it running again after 40+ years!
@todmatthew5824 3 ай бұрын
I had a 73 80 GT Enduro, maroon with gray. I loved riding that bike and outrunning my brother on his 3 wheeler. It would go around 40 mph if I remember correctly. Thanks for bringing some of the best childhood memories back to life!
@mikewerner3797 3 ай бұрын
I had that exact bike when I was a kid in the 70’s. Good memories
@user-yn1kx2mn9i 3 ай бұрын
I had the MX 80 which is identical to the Enduro and they made a GT also and they were all exactly alike but different colors. This bike made me hate Yamaha for a long time cause I pushed it more than I rode it. That auto oiling system is junk cause every bike I’ve seen like these gave trouble. I actually had a friend that had the Enduro and another had the GT and I had the MX. I’m 48 and still have Philip head screw burn spots on the inside of my right leg from wearing shorts and riding. I mainly watched the video just see if he got it running. I have a banshee now and have had it for 4 years and that is the first Yamaha I’ve had since having one of these bikes. I got a 1986 XR 80 after the MX and you can’t kill the XR 80 at the age of 12 and I never had to push it unless I ran it out of gas
@mikewerner3797 3 ай бұрын
I don’t remember how long I had the bike(my memory is a little fuzzy I was probably about 10yrs old) but I don’t remember having any problems with it 🤷♂️. That’s funny you should say , but I just bought a 1987 xr 80 project bike. Always wanted one because they were popular like you said. Almost have it finished. Love restoring these old bikes.
@johnb5519 3 ай бұрын
Sometimes when the injection bikes have been sitting for a long time, oil will leak into the crank case, and it takes a while for it to clear out. Finally one Vinny can outrun.
@timewa851 3 ай бұрын
Vinny sez: 'your new/old bike sucks gear lube!'
@raeanker3078 3 ай бұрын
That brought back memories, I had the MX 80 loved that bike but it hated me, the number of times I had to push it home from our local bush tracks, at least it helped me learn how to work on bikes. Cheers from down under.
@thebeddoctor4273 3 ай бұрын
My neighbor in NC would restore old 50 and 75cc bikes. And when it would snow we would all go ride around down down on these little bikes. It was one of my best memories.
@georgepretnick4460 3 ай бұрын
Joe, I've learned a lot from you, but I do object to you scratching around in a carburetor or points with a screwdriver. Not best practice. Being in too much of a hurry makes us use poor practices.
@FeathersMcGraw1 3 ай бұрын
I love these little bikes. I hope you're feeling better soon.
@eaytc6968 3 ай бұрын
I have this same bike! This is the video I have been needing, awesome!! Also, watch all of your videos anyway. Thanks again for having the best channel EVER!
@Luckyj1s 3 ай бұрын
Ready for the next video tearing this motor down! Can't wait to hear this thing running crisp!! Great job on your diagnostic skills too!
@leadfootgarage 3 ай бұрын
I had one of these when I was a kid on our farm. Rode it every chance I could. So fun.
@tonyaxeman4381 3 ай бұрын
Timing check . The Yamaha is notorious for that points gap out of spec.
@bigbullhorn8443 3 ай бұрын
My 1974 Toro snowblower fired right up first pull after I did the points that I learned from u.
@StarbreakerGenX 3 ай бұрын
Wow, that's what I learned to ride on. Thanks for posting!
@notagain8661 3 ай бұрын
I went and looked at a old GT340 Yamaha snowmobile many years back. The guy wanted pretty much nothing for it because he could not keep it running. He told me it would run with the exhaust unhooked but not when it was. On a hunch I bought it, brought it home, took the pipe all the way off. Banged it a bit on the ground and shook out a coffee can full of cat food the mice had filled it with. 😳 The sled ran great after that for many years! 😊
@luuk-out-below9804 3 ай бұрын
She's a smoker!!! Great little starter bike, waiting for part 2.
@bananabrooks3836 3 ай бұрын
Clues were: no oil in the crankcase and grey smoke when it started having been kicked 1000 times.
@JeffPutchinski 3 ай бұрын
Get well soon!! I currently have a 75 YZ 80 apart on my bench.....looking forward to tips on reassembly!
@jeffreyullrich8511 3 ай бұрын
We had that bike growing up. Seeing and hearing that bike brings back memories. Cool bike
@prezzzrock 3 ай бұрын
Helpful hint.......when using Channel Lock type pliers, turn them the other way from how you had them. The pressure from your hand will assist in clamping the pliers harder on the object you are looking to loosen. The way you did it is actually causing them to slip.
@Richard_Gobbler 3 ай бұрын
He does it on purpose to get people to engage in the comments. Helps the algorithm promote the video
@prezzzrock 3 ай бұрын
Ahhhh..I see. It worked! @@Richard_Gobbler
@johnharlan7205 3 ай бұрын
I had a JT 60 Mini Enduro, loved that bike. It was a sad day when I sold it.I bought it used in 1975 for $125.
@ericshepherd8206 3 ай бұрын
I had a 74 with the head light and tail light. It was dark red. I redid the seat fork seals and new tires cleaned it all up and would ride that thing all over the place and I was in my 40s. Loved it!
@MrDavehb47 3 ай бұрын
When I was 12 years old, I had the RM 80 I think that would’ve been 1974 I wrote it for two years and then I got a RM 125s live in Las Vegas, Tropicana and Pecos. It was all desert back then now it’s a Walmart in Sam’s Club.
@dannyjamison8337 3 ай бұрын
@mrdavehb47. The RM80 was not released until 1978.
@senyah750 3 ай бұрын
@@dannyjamison83371977 with the B model!
@Melicoy 3 ай бұрын
Thanks for the great videos i watch them all. 4:22 when using pliers like this you need to turn them aroun. The force of you pulling is added to the jaw grip. You are using the tighten direction You are adding engine oil upside down. Put the oil can spout at the top not the bottom
@mikef3300 3 ай бұрын
It was 1978 and my mother bought me one of these for my 8th birthday. So much fun.
@karlawson Ай бұрын
I had the 100 Enduro version of this. Loved to see that yellow and stripe on the tank. Did like no maintenance on that thing and i crashed so many times at 14 that i traded it to my brother for a Honda XL75 4-stroke. 2 stroke Powerband and I didn't get along 😅 great videos and nostalgia my friend. Brings back cool spring days ripping down the country trails. That's what started my love for Motorsports.
@wildmandigging3486 3 ай бұрын
Can’t wait to see next video on this lil beast God Bless hope your feeling better
@teleman65 3 ай бұрын
Dude ! Please learn the proper way to use channel lock pliers! Holy crap how can you not know by now ! Jeeze And if you think the pipe was still clogged why would you not take time to just pull it and confirm instead start it Rev the crap out of it to an extreme?
@jamesedward5355 3 ай бұрын
I had a 1978 DT 100 Enduro (red tank) when I was a kid, fun bike to learn on.
@mikealgieri1984 3 ай бұрын
Pretty cool had the GT version brand new when i was a kid...Great job keep restoring these old bikes.......
@johntevault3945 3 ай бұрын
Its always rewarding to take someone's project, and make it run and ride again! Thanks for the journey. When I start a project bike for the first time, I like the preheat the cylinder. I use a propane torch to chase the moisture out of the metal, but a heat gun would work as well. I'm a Honda guy but I have a small box of parts for Yamaha 80s. Tach/ speedo switches headlight? Been years since I touched it..I will try to find it...
@billbong156 3 ай бұрын
I had this bike when i was a kid,, i never thought would see one again
@davidwrobel8089 3 ай бұрын
Don't hold back on doing better job cleaning things up.
@user-ik4fd9ny4b 3 ай бұрын
I still have my 73 DT250. New, it was $835 tax, reg and all. We used to wrap the tanks in a thin, flexible sheet of styrofoam that was used to package/box electronic equipment/stereos and then duct tape it around the tank. It kept our paint in good condition.
@TearsOnTheSaintLaurent_ 3 ай бұрын
Vinny always finding his way into the shot.....what a good boy.
@82gksosjs 3 ай бұрын
Man this guy has taught me soo much over the last few years big thanks from 🏴
@GordonModFarm-ju7nk 3 ай бұрын
Remove the flywheel, loosen up the stator and push the crank seal back in place. It'll run clean until you get a new seal. Easy fix.
@rockman49er 3 ай бұрын
No stator
@lowellfunk8974 3 ай бұрын
You need to oil the filter with air filter oil in order for the it to stop dirt from entering the carb and engine...😢
@user-cu9qv2xp7v 3 ай бұрын
Oh what memories!!! my first bike right there. i remember dad saying you can't start it you can't drive it. did i ever try to crank that bike day after day. i was so happy when i finely got it. drove it everywhere. the only thing that was missing was the front fender. at 6 years old in 1980. this video makes me miss it.
@user-vz7yr1zy8l 3 ай бұрын
That type of carb float is a nitrophyl type, it is a solid block of plastic, shaking it will tell you nothing!
@TruckingCarsL48 3 ай бұрын
ACTUALLY, he said, something like, while shaking it..."ok it's not falling apart or things falling off" I don't think he thought it had a pin hole/full of fuel because he usually mentions that. Just my $.02
@ghpjerry 3 ай бұрын
Dang, what a find! My 1st bike was a 78 YZ80 when I was 7yrs old...then I had a 82 YZ80J, 1st yr of liquid cooled, had the radiator on front of bike behind number plate...that thing ripped!
@Moneyrose86 3 ай бұрын
I learned how to use a clutch on the GT80! Such a fun mini bike
@citizen4power 2 ай бұрын
1st bike I had early 70s a Gemini 50 then got a Mini Enduro 60 and man it was on! 70s,80s, and 90s bikes rule. Good find!,thats gonna be a sweet lil bike when you get done.
@nostrem82 3 ай бұрын
that's false those Yamaha oil pumps rarely if ever fail. not sure why some people think that they were crazy over engineered..cudos for helping keep these old bikes alive 🤘
@peaceprayer595 3 ай бұрын
Regarding the Yamaha Autolube in the 70s, I politely but heartily disagre.
@nostrem82 3 ай бұрын
@peaceprayer595 you can disagree but you'd be wrong
@peaceprayer595 3 ай бұрын
@nostrem82 Did it ever occur to you that in all your moto genius, there could be other factors that play into science in spite of your experience?
@conrad6604 3 ай бұрын
Great video! I had a 1974 Yamaha MX80 when I was 12 or 13 years old. It had an aftermarket down pipe and that bike would rip when it hit the power band. It got a leak in the gas tank which I fixed with JB weld, but it still seeped gas. I hope you do a part 2 video where you replace the crank seals and get this awesome bike running the way it should.
@MR-puffnstuff 3 ай бұрын
Vinny looks great out and about being in the foeld running and having fun this bike would definitely clean up very nice with little work.
@tmi19 3 ай бұрын
Had a 1974 GT80 back in the early 80’s. White will a little yellow. Great first bike. Clutch cable used to break all the time, otherwise always ran like a beast.
@alanblenkinsop2775 3 ай бұрын
Simplicity at its best joe that little Yamaha 80 is like the Ty 80 I had40+ years ago such fun nippy little bikes
@steveharris6916 3 ай бұрын
I would love to see you do a complete bottom and top restore of a vintage xr75.
@wisecampmotorcycles8258 3 ай бұрын
It won't happen
@TruckingCarsL48 3 ай бұрын
@@wisecampmotorcycles8258 not his forte
@shartne 3 ай бұрын
Cool I use to have one of thse yamaha mini bikes back in the seventies it was a lot of fun for a little boy. they run pretty good.
@peixeon9410 3 ай бұрын
I had one of this 1984-86 but we change the engien to a 125cc wilde ride and werry mutch fun fore a 15 year boy here in Norway.
@smoothlover073 3 ай бұрын
Looking forward to the next video. This bike is almost good for a restore. It’s pretty much already done just needs the seat which you have and polish the fenders. Get a new headlight assembly which hopefully it comes with the brackets that attach it to the front fork and a rear taillight assembly.
@kylelangworthy9641 3 ай бұрын
Oh my gosh, what a blast from the past. My first dirt bike was a yamaha m x80 eighties model. Basically the same exact bike is this looked exactly the same except for the White tank
@a2wtommy 3 ай бұрын
I had a 73 Yamaha GT 80! My first motorcycle, and I loved it!
@peaceprayer595 3 ай бұрын
My third. Had a Bultaco that ran for one minute. Had a Honda 50 mini trail that ran with kerosene in it. Had the GT80 that took the same licking and kept on ticking. Best times in the USA!!!
@williamkudrna5843 3 ай бұрын
I spent a lot of time on a Yamaha MX80 in the early 80's.
@peaceprayer595 3 ай бұрын
Greatest times in the USA EVER!
@regconrad7783 3 ай бұрын
Man I did to I wish I would of keep mine was 1980 Mx 80 never did leave me walking things are just not built like that it’s a crime how the world went
@charlesronk2989 3 ай бұрын
A 1976 version of this same motorcycle was the first motorcycle I ever rode. I went on to race a 1979 RM80N at Baja Acres in Birchrun Michigan. Man does this bring me back.
@wayne-oo 3 ай бұрын
Invest in an ultrasonic cleaner ! The ultimate shop tool that once you’ve used one you’ll never understand why you hadn’t got one sooner !!
@kvandyke252 3 ай бұрын
He has one and rarely uses it. Drives me crazy. Every carb I work on goes through the ultrasonic.
@shawnschroeder2 3 ай бұрын
I love Vinny...such a happy guy!
@youngblood2 2 ай бұрын
I'm standing behind you Joe! I wouldn't pressure wash before bringing an old bike, back to life. Water can and will cause all kinds of problems with the electrical system.
@garyvinnaysr.4439 3 ай бұрын
I was laughing watching him do a compression test with the carburetor off and the throttle full open
@TruckingCarsL48 3 ай бұрын
SO, you are just a happy person? Or a fool? 1.) Do you do a compression test with throttle open? "Almost every compression testing guide tells you to hold the engine's throttle wide open during a compression test" 2.) Can I do a compression test with carbs off? "You want unimpeded air to enter the combustion chamber for compression. Carbs off, inlet open is fine."
@dannyjamison8337 3 ай бұрын
@truckingcarsL48. If the carburetor is off, what difference does it make to open the throttle? 😂
@garyvinnaysr.4439 3 ай бұрын
I was laughing in a good way. I look forward to watching his videos he does a great job educating and editing his work.
@dannyjamison8337 3 ай бұрын
@@garyvinnaysr.4439 he really doesn't.
@user-yn1kx2mn9i 3 ай бұрын
The question is since you sound so knowledgeable. Do you do comprehension tests with the carb off while holding the throttle wide open? You need to read your manual again or pay closer attention to wherever you got your info before you are so quick to call someone a fool cause you made yourself look like a fool not having a clue on what you’re talking about 😂@@TruckingCarsL48
@aawrench 3 ай бұрын
Love your videos. I’m on the clean it up camp. We can see it’s definitely a barn find. Now make it look new again! Awesome finds you wind up with…
@robinbrowne5419 3 ай бұрын
Such a cool little bike the way everything is scaled down. It is like the baby of the DT line 👍
@madeogarcia1020 2 ай бұрын
I learned to ride on one of these back in 1979. Slow bike but a lot of fun. Bought a Kawasaki KDX 80 around 1982. Then grew up to a 1981 Suzuki Rm 125. Love the old school bikes they ran great.
@joelalexander5338 2 ай бұрын
Reminds me of my first bike, a 1977YZ 80. Loved that thing.
@donpugh6863 3 ай бұрын
can`t believe you didn`t clean the filter housing before you installed a new filter
@bleakyfinder2692 3 ай бұрын
never does.
@kevinalbers1084 3 ай бұрын
I agree. He made sure to put some grease on the filter to "keep out the dirt" but then stuck it into that filthy housing.
@wisecampmotorcycles8258 3 ай бұрын
I can believe it
@Jimsalos 3 ай бұрын
Great video! I hope you feel better soon Joe
@jessepayne6757 3 ай бұрын
Before I even watch the video, I had an 74 and it was a little beast. Mine was same color and bought it for 100 bucks running. I miss it so much
@peaceprayer595 3 ай бұрын
I paid 60 bucks for mine. You couldn't kill it. I also bought a 1972 Plymouth Roadrunner with 42k miles for $650. Best times EVER!
@eaytc6968 3 ай бұрын
Hope to see what tires you put on this. Also excited for the crank seals. Thanks for the tip on the oil pump breather screw.
@wisecampmotorcycles8258 3 ай бұрын
He won't put tires on it, you'll never see this bike again after this video
@cmagma3953 3 ай бұрын
The sound, the smell and the tools: All great. Go on and watch the seals. Did you notice that the wheels are not in line? Seems like the frame or axels are bent.
@northofhwy8180 3 ай бұрын
Neat little bike. I grew up on a Yamaha champ 50. Many many hours on that little bike.
@boblambert8985 3 ай бұрын
Great job, but a small tip. @ 4:15, if you place the self-adjusting wrench the other way up it tightens as you apply torque, so you aren't just relying on the force of your hands to grip the fuel cap.
@mikeatkins8907 3 ай бұрын
Anxious to see you finish this bike to see if its a bad crank seal. I have a 73 175 Enduro that just might have the same problem.
@tomahawksportfishing 3 ай бұрын
kinda makes sense now why the fuel screw was turned all the way it with that super rich condition. Rule of thumb on carbs is if screw is on air box side (air screw) if the screw is on motor side (fuel screw). Fun videos like re living my youth. Smiles
@grahammcmurran7857 3 ай бұрын
27:49 You no the thing I love and have a chuckle at, most Americans always use an adjustable wrench, no spanners, but sorry he has got spanners, 😂
@garagecraze 3 ай бұрын
Outside of winter I think your neighbors should be paying you a monthly subscription to keep the mosquitos away
Brick House Builds
Рет қаралды 10 М.
Team Pacemaker
Рет қаралды 33 М.