Serger Lower Knife Change

Рет қаралды 42,732

Paul Howell

Күн бұрын

How to remove and replace the lower knife blade on a serger.

Пікірлер: 35

@luzdeluna695 3 жыл бұрын

could you demonstrate how you loosen the upper knife?

@AlitaausArgentinien 3 жыл бұрын

After 100 vids watched I find a clear explanation about the position, adjustment and work of the knives. THANK YOU SO MUCH - from Argentina.

@lindawilson5960 4 жыл бұрын

Thank you! You saved my frustration on my serger not cutting correctly. This totally fixed it!

@lalika64 2 жыл бұрын

I just fixed my machine kinfes using this video!! Was having a problem adjusting it and your drawing made it clear thank youuuu!!!

@vivianhallal6793 3 жыл бұрын

Thank you got me to fix my problem searched many sites but you where the best in explaining clearly thank you again your awesome

@donnawoods442 4 жыл бұрын

Excellent video with great closeups of the blade, thanks!

@karenbrewer5975 4 жыл бұрын

Thank you so much! I've been struggling for over an hour. You helped solved my issue.

@jeanettemitchell6357 2 жыл бұрын

Thank you for this great video! Very clear and concise instructions that are easy to follow.

@bawo3391 3 жыл бұрын

I'm also grateful for your tip. My problem is finally solved.

@radiantevolution6577 Жыл бұрын

Omg I know this is an old video but I appreciate this video so much Thank you, kind sir!!!

@jessicareid8474 Жыл бұрын

This was soooo helpful. That you for making just the video I needed.

@kiskiatreuwerth2917 Жыл бұрын

Thank you very much! Very helpful video!👍

@victoriabrown55 Жыл бұрын

Ahhh you are a life saver, thank you!!

@sonyabrown8721 2 жыл бұрын

Thank you, I was going out of my mind about why my new blades still sucked.

@nanamania6085 5 жыл бұрын

Thanks for this informatieve video. Could you pls also show how to change, adjust the upper knife? Thanks in advance

@user-ec2vx2hq1p 8 ай бұрын

Thank you,I will try my best. I don't bknow why the upper knife keep hitting on the middle and refused to go down as usual. ❤❤

@yvonneattridge-hall799 Жыл бұрын

Excellent explanation, thank you!

@mnelson9057 2 жыл бұрын

Thanks for this needed information🙏

@Lisa_In_Canada 5 жыл бұрын

Super helpful, thank you!! :)

@discoveringfev5307 3 жыл бұрын

So so helpful thanks so much

@marrigjelittlejohn8182 4 жыл бұрын

Thanks for the info it did the job

@holliebingham1311 4 жыл бұрын

Thank you!

@darussianping61 3 жыл бұрын

Brilliant!

@aljewels5640 5 жыл бұрын

any tips for getting stubborn screws out to change the blade?

@archuletajennifer82 2 жыл бұрын

Hello! My blades do not seem to come close enough together. They are raised and lowered as far as they go and they just don’t match up. It was working fine and then randomly stopped because the knives don’t reach each other. Any assistance would be greatly appreciated! 🙏🏻

@mildrahkatlego5745 3 жыл бұрын

But how do you lift it up so high?

@marshapeterson7423 2 жыл бұрын

Please I need help on How can I change the blades on white super lock electronic 1934D? Thanks 😊 🙏

@donnayoung2169 2 жыл бұрын

Thank you so very much for posting this! I was able to do this repair myself, thanks to you. God bless you!

@ladydaizedogcouture 6 жыл бұрын

how do you change the upper knife?

@thepaulhowell 6 жыл бұрын

There are different ways depending on the make and model. See the video at about 2:30 on to see about moving the upper knife. On this machine you would loosen the screw on the left of the upper knife, slide the knife out, slide the new one in and tighten with the upper knife in the correct position.

@josephparba73 2 жыл бұрын

How to slide the upper knife?i tried so hard but its too tighten to remove the screw😭😭😭😭

@josephparba73 2 жыл бұрын

Hello sir how to replace the upper knife?please help me so i can replace it coz its already dull i have already the new one but its very hard to remove the old one how to remove it?

@notesfromleisa-land Жыл бұрын

A 10mm ratchet worked for me. I will note that the manual states that the lower knife should not have to be replaced as it is made from special materials. However if it is damaged, it should go to dealer. I was able to replace mine. My serger is from the 90's. You will need to exercise care about where the stop is on the round knob to the right. You may have to use your ratchet to spin the bolt so that the blade aligns correctly and the stop allows the blade to spring flush left to the lower knife if something gets rotated out of line (as mine did).