Serpentine belt replacement 2.4 Jeep Renegade

Рет қаралды 23,715

Жыл бұрын

2.4 Cherokee and Compass owners can follow everything after inner fender removal as well, very easy to follow how to guide to replace serpentine belt on the Jeep 2.4 multiair tigershark engine
Must have mechanic tools ⬇️
amzn.to/4aWzsHZ
* The above links are affiliate links that help support my channel the price does not change for you but I do make a small commission off each sale and its greatly appreciated *

Пікірлер: 42

@oneopinion8767 Жыл бұрын

The only video that tells you to go through the wheel well, which I figured out myself after struggling from the top, now, this is the first video I see recommended when I sign on to KZfaq, thanks for nothing youtube.

@mddx 9 сағат бұрын

simply perfect, all of youtube should learn from you Sir! exactly all mount of information which you need in short consistent delivery. thank you!

@603Mechanicvids 9 сағат бұрын

greatly appreciated 👍

@NK-hx8jq Жыл бұрын

Not only did your video show me how to do the belt but I could also see exactly where the oil pressure sensor/switch is which is the next project. Thanks liked and subscribed!

@603Mechanicvids Жыл бұрын

Thank you, im glad I could help out 👍

@user-yr9pf9xp8z 5 күн бұрын

Straight to the point VERY INFORMATIVE thank you

@christianrayford5802 10 ай бұрын

Okay I did this repair yesterday. The instructions and walkthrough on the different pullys was definitely informative. The only thing I would add would be the last bit when you go to put the new belt on, the service manual has the belt coming from the bottom attaching to the idler pulley. For the life of me I could not get it to finally wrap around the idler pulley. So what I did was take it off. Wedge the screw into the opening with the idler on it, applied blue thread locker (it came with red) and then used the tensioner to two-step the belt onto the correct pulley. After that it was all about screwing using a drill until the screw was flush and in there. Torqued to 16ft lbs. Appreciate the video! Couldn't have done it without you.

@jasonmcc820 Жыл бұрын

Thanks for sharing, you made that look really easy. I'm gonna watch this at least 2-3 more times and attempt changing my belt this weekend lol

@603Mechanicvids Жыл бұрын

No problem glad I can help out, you will have no issues changing yours its easy just follow the video 👍

@ScottYouger Жыл бұрын

It's almost the same for a 2018 Compass. No Phillips screws, but 8 mm screws and 10 mm plastic nuts. I changed the idler pully. That's 13 mm. The factory put red threadlocker on that bolt. It's a long one!! Use an extension on your power driver to make it through that metal tab in front of it. Thanks for the video, it helped!!

@jimklawinski4005 Жыл бұрын

Thanks for this video. I'm more confident about replacing mine now.

@rharris22222 Жыл бұрын

Thanks for the info. It was helpful to see the installation and handing the tensioner.

@familybaldridge 11 ай бұрын

You explained it very well! Good camera work

@superbikemike 2 ай бұрын

Thank you …great info 👍🏻

@dallasjoe Ай бұрын

I found that you can just remove the two 10mm nuts and pull the snap pop and pull the splash guard back to change the belt you do not have to remove the whole splash guard . I found it to be faster.

@jaulj8 Ай бұрын

Awesome and right on point!!!👍💯🔥🔥🔥

@frankbleigh9620 Жыл бұрын

Thank you for the video, helped out a lot

@digitalmuzik8086 Жыл бұрын

Thank you so much for your video.

@kasparvise1385 Жыл бұрын

Thank you for this video

@omarmajid1343 Жыл бұрын

Is it 6PK2004 or 6PK2005 number for compass 2020?

@MattTelepenko Жыл бұрын

Love this. Thanks so much. Is there any chance you could do a video on replacing the ball joints on a renegade?

@603Mechanicvids Жыл бұрын

no problem glad I could help out, I definitely will once I get my hands on a renegade again. ours got totalled 2 months ago

@MattTelepenko Жыл бұрын

@@603Mechanicvids sorry to hear that! Maybe you'd be able to answer my question if thats ok. As far as you know do I need to replace the whole lower control arm?

@603Mechanicvids Жыл бұрын

@@MattTelepenko no you don't need to replace the whole control arm, the lower ball joint can be removed just by removing the 3 bolts holding it in place

@louispabon1077 9 ай бұрын

Love the video can you do a replacement on an alternator on this same vehicle

@603Mechanicvids 9 ай бұрын

@louispabon1077 Thanks, I already have a video for the alternator replacement, go to my channel and go to the jeep renegade Playlist there's lots of other videos as well

@roonbooks3227 11 ай бұрын

What year range will this be the same? You did not state in your video.other than that, great camera work and explaination

@603Mechanicvids 11 ай бұрын

Thanks, and any of the year renegades with the 2.4l engine

@chazzicili3244 7 ай бұрын

How would i know if i should change any of the pulleys? Or what should i be looking for if any needs to be changed out?

@603Mechanicvids 7 ай бұрын

usually they'll start squealing or start to have a wobble when they've gone bad. you can also inspect the surface of the pulleys where the belt would ride on it for any damage

@chazzicili3244 7 ай бұрын

@@603Mechanicvids mines just started squeeling when accelerating. So I'll have to check it out, Thanks for responding