Any idea when belt tensioner would need to be replaced ?

Excellent

Ty 100% accurate, helped me fix in 15 mins

😊

That is an excellent video. Thank you very much.

What symptoms u have?

A job that I've been dreading, and you make it look like drinkin coffee and eating doughnuts. You are the man!

Thanks for your help fam! 💪🏾🔥❤️

Honda crv in 2017 had both engines, the 1.5 turbo and the 2.4. How come your videos are all for 1.5?

you do NOT NEEEED to remove the fan... it only really helps with room with pressing the pulley back on. if you have extensions the fan can stay on. you can press the pulley back on with the fan in place, its tedious but possible (did it with a ratchet and adjustable wrench) if you have a ratcheting box wrench big enough for the nut that does the pressing; it will be pretty quick. but the extra 2 steps of removing/installing the fan is not needed especially when buying that tool to hold the pulley.

I found it much easier to remove the three bolts first before removing the power wire and plug. Access to these is very difficult while the alternator is in place. Same goes for putting the alternator back in; wire and plug first then bolts. I'm going to rebuild the Mitsubishi alternator I took out so I've got a spare (parts are only $40). Also, it may be easier (for putting the belt back on) to remove the passenger side front tire and wheel well at the start. Routing and setting the belt can be tricky and cause a problem if not done properly so an ounce of prevention...Good video!

Thank you. I hope this works on a 2021

Jeez I smashed my rear right cluster a tree branch hit it in a storm Honda wanted ridiculous money to replace it, I ordered one of Ali express which was less than half the price of the OEM part, I wish I had bought the Honda OEM part instead the LEDs are not as bright and through up error on the dash, what ever you do don't buy the cheap crap from Ali express however tempting the price.

I was quoted almost $200 to change my engine air filter and cabin air filter. Spent $31+tax on filters and did it myself 😒

You never shared the link to the Park plugs..

Thanks

Your video makes it look so easy and smooth. Great video took me 1 hour.thanks.

does the intake and exhaust use the same sensors, or are they different?

If I want to check the fluid level inside the battery or even add some distilled water, is there a way to open the top? Thanks.

Excellent video! Thank you!

Question my Silverado turns hard to the left and the power steering pump making funny sounds. Would that be my problem

Great video and very detailed, how much power steering fluid did you need to add to the new pump?

Anyone know where I can find the amber cover for this light? 2019 Latitude 2WD. Rock shatter the cover and the bulb. Found replacement bulbs (45-55 bucks)

Very good video I didn't have a fanblade remover so I went the other way without fanblade off as the other gentleman did. Took everything out all together then removed power steering puller when it was on the ground. Both ways are good but not having to remove clutch fan was much easier. Thanks for alternate procedures.

Can you tell me where camshaft sensor in 2020 Honda Fit LX Located, I can't seem to find it.

I would get a 14 mm spark plug socket with built in magnet . AS it will hold the spark plug as you put it in place . So as not to drop it , etc to damage the tip and risk crossthreading .I also removed one coil pack , yet didn't have the right spark plug socket , now I do . So reconnected everything , yet had engine light on , saying three different fuel injectors were malfuntioning , charging system malfunction , collision control malfunction and orange triangle appearing on dash . Others have removed the negative battery terminal before this . I am thinking I shorted out the alternator or what !? Now to test all fuses to see if blown , especially one for alternator . Previously I had power washed my engine and how many days later . I tried to start my car and it was completely dead , used a battery jumpstarter to get it going . A few days ago car stalled on freeway , had to have it towed home .

Excellent tutorial! Great job and thank you for taking the time to do this!

Did it Thanks

I'm really grateful for this video BUT no matter how i turn the tire, i never have enough room to reach in and out the unit back into place

Thank you. :)

How often should youk-up on 2017 renegade. My vehicle engine light comes on when im driving over 50 mph and the dealership said that there's nothing wrong. Do you think I need a tune up? ​

At 5:26 there is a mounting bolt visible under the 16mm line that I don't know the name of. I need to know what size they are to remove them. The pump I bought at o'reilly had the mounting bolts installed in the opposite positions making the bracket sit unevenly. Other pumps are prohibitively expensive or don't include those bolts at all! One of the bolts have a raised portion so the mounting bracket is level. Any help is appreciated!

Thank you

Your awesome great video

The power steering pump on my 01 Silverado keeps breaking at the shaft and pouring fluid. Replaced it twice in the past week and can’t figure out what’s causing the issue, anyone have this problem before?

I'm having a rough idle issue in my daughters 2016 Renegade with the 2.4. For $80 I'm going to change the plugs and coil packs and see what happens.

Thank you sir.

👍👍👍

thank u for this i love u

Hi. What if your off and on all your icon on you dash goes off and on randomly. How do we know which fuse that goes to

Helped me get my caliper unstuck and clean my rotor. Thank you for the great content!

Thank you for the video this specifications of the battery also works for a Camry 2018 XSE v4 2.5l ?? Thanks

Damn shame I got my genuine 80 amp alternator since 97 in my Celica Turbo thought Toyota would've held up at least ten years ty though God bless you

Damn shame I got my genuine 80 amp alternator since 97 in my Celica Turbo thought Toyota would've held up at least ten years

Dont use a T50 guys. DO NOT USE A T50 😂

Honda is a dick for placing the alternator back there instead of making it easier to access towards the front 😂

If these sensors are faulty would they show up on the obd2 scanner? And do these sensors beings falty cause misfires?

My Negative terminal is stuck even after loosening the bolt all the way. I can move the terminal left and right but it won’t pull up

Thanks good job

best real world how to that I have seen.