Service Call: Komatsu Excavator Repair on a PC200LC - Wipers, Heater, Radio

  Рет қаралды 19,008

Tekamo HD

Tekamo HD

Күн бұрын

Need a HD mechanic? Book one at www.tekamohd.com/
In this episode, we’re learning how to troubleshoot electrical issues on a Komatsu excavator. We follow a certified heavy-duty mechanic as they examine electrical issues reported for the wiper motor, heater blower, and radio.
SERVICE CALL
Our brand new series on troubleshooting and repair for heavy-duty mechanics, heavy equipment operators, or DIY enthusiasts. This educational resource helps to provide heavy equipment skills so you can conduct your own repairs or machine maintenance.
TIMESTAMPS
00:00 Intro
00:38 Service Call - in this episode
01:05 Check the monitor for codes
01:59 Wiper troubleshooting
07:00 Heater troubleshooting
14:45 Radio troubleshooting
16:51 Remember to Like / Comment / Subscribe!
Got more questions about heavy-duty equipment?
** LEAVE US YOUR COMMENTS and we'll answer your questions!! **
🔔 BE SURE TO SUBSCRIBE TO OUR CHANNEL!
Check out more of our amazing machine maintenance tutorials:
/ tekamohd
Business Contact: media@tekamohd.com
---------------------------------------------------
👷 MEET THE MECHANIC
William is a Canadian Red Seal heavy-duty mechanic and has been in the trade for more than 30 years. He is also a Commercial Transport Technician and a Certified Instructor at one of Canada's well-known technical institutes. Through years of experience, William has learned many tricks of the trade and is excited to share his knowledge with the heavy-duty community!
🦺 OPERATIONAL SAFETY
Always ensure you are wearing the proper personal protective equipment suited for your procedure such as steel toe boots, safety glasses, hard hats, gloves, overalls and any other equipment suited for your task at hand.
---------------------------------------------------
🌐 CHECK OUT OUR PARTNER SITES 🌐
* FORTIS HD*
Affordable tracks, tires, & parts shipped to your door.
www.fortishd.com/
** RENT1 **
Heavy equipment rentals for fast and easy work on any construction job. Residential or commercial, professional or homeowner, they've got earth-moving machine rentals for you!
CANADA: www.rent1.ca/
USA: www.rent1usa.com/
** SMARTCAST EQUIPMENT **
Purchase used heavy equipment for an amazing price (ask about their Rent-to-Own programs!)
www.smartcastequipment.com/
** DRIP MARKETING **
This awesome video was proudly produced by them!
www.dripmarketing.co/
---------------------------------------------------
⚠️ DISCLAIMER ⚠️
Any information on heavy equipment operation available at this channel is intended for general guidance only and must never be considered a substitute for the advice provided by a qualified heavy equipment instructor. Any reliance you place on such information is strictly at your own risk. If you intend to operate heavy equipment, always ensure you meet the legal permitting requirements based on your geographic location.
Although TekamoHD takes all reasonable care to ensure that the contents of the KZfaq Channel are accurate and up-to-date, all information contained on it is provided ‘as is’. TekamoHD makes no warranties or representations of any kind concerning the accuracy or suitability of the information contained on this channel. To the extent permitted by mandatory law, TekamoHD shall not be liable for any direct, incidental, consequential, indirect, or punitive damages arising out of access to or use of any content available on this channel, regardless of the accuracy or completeness of any such content.
TekamoHD disclaims any control over, relationship with, or endorsement of views expressed by other KZfaq users. All user comments are from members of the public and do not necessarily reflect the views of TekamoHD. TekamoHD may at any time and at its sole discretion change or replace the information available on this channel.

Пікірлер: 48
@TekamoHD
@TekamoHD Жыл бұрын
SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD
@smartcastequipment9299
@smartcastequipment9299 3 жыл бұрын
Great content, can't wait to see what happens next.
@stephenpiore7601
@stephenpiore7601 3 жыл бұрын
Nice buddy,just keep on fixing,I'm learning,,, God 🙏 bless
@TekamoHD
@TekamoHD 3 жыл бұрын
We appreciate the comment! They really help us out. We have tons more episodes coming out and we hope they continue to be a good learning resource for the community.
@stephenpiore7601
@stephenpiore7601 3 жыл бұрын
@@TekamoHD looking forward for many useful "tips and Ideas"
@williamriquelme2147
@williamriquelme2147 3 жыл бұрын
Thanks Stephen, you have great initiative and its good to know that you are finding these tutorials useful. They break them, we fix them :- ) Below is a link to "Lunchbox Sessions" hydraulic training - these may help as well. kzfaq.info/love/BX5Aj80CYu_DWmwdIZGIKQ
@stephenpiore7601
@stephenpiore7601 3 жыл бұрын
@@williamriquelme2147 thanks,,very much appreciated, actually I'm finding a way some company and agency or trade schools in order to qualify as a heavy duty and equipment mechanic,,
@RENT1
@RENT1 3 жыл бұрын
Awesome video!
@brandonvitier220
@brandonvitier220 2 жыл бұрын
Just have to say I really enjoy your videos and how thorough you are with your repairs. Im the same way 16 years in the business ASE Master tech hats off to ya there aren’t many of us that take pride like you and I Do in our work
@TekamoHD
@TekamoHD 2 жыл бұрын
Thanks for watching and the kind words, Brandon. What area you working?
@williamriquelme2147
@williamriquelme2147 Жыл бұрын
Hi Brandon, great to hear that you also enjoy what you do and I sure hope that we are not the last of our breed of techs, we hope the new generations carry the torch for us. Neither snow nor rain nor heat.... :- ) Stay safe my friend.
@gonzalolagos1218
@gonzalolagos1218 3 жыл бұрын
Nice video!!! Very helpful and motivated to go into the area for ppl who wanna learn. Thanks Will!! Keep going please
@williamriquelme2147
@williamriquelme2147 3 жыл бұрын
Thanks for your feedback Gonzalo, let us know if there are any topics you would like us to cover or some specific issues you would like us to analyze.
@TekamoHD
@TekamoHD 3 жыл бұрын
Thanks for the kind words Gonzalo! More Service Call episodes are coming soon and tons feature William!
@gonzalolagos1218
@gonzalolagos1218 3 жыл бұрын
@@williamriquelme2147 thank for the open door to comunicate withnyou and your team! The videos are very good! Im wondering if as a HDT also are in charge of transportation trucks, diesel trucks, samll engineers? In keep searching if HDT's hole full area of work. What will be if I take an apprentship path. Im really interested to learn more Thank you so much 🤜🤛
@gonzalolagos1218
@gonzalolagos1218 3 жыл бұрын
Hi Will. I think i founded the answers to my question in other of your videos jajajaja.....sorry You and Tekamo HD have a lot good videos with very good comments and replies! Is a lot good information! I appreciate!
@williamriquelme2147
@williamriquelme2147 3 жыл бұрын
@@gonzalolagos1218 No problem Gonzalo, there will be more tips and Q&A's coming up in new episodes. glad to know they serve their purpose. Stay safe out there.
@jondoherty3678
@jondoherty3678 3 жыл бұрын
Sparks a nightmare give me hands on mechanicals anytime
@williamriquelme2147
@williamriquelme2147 3 жыл бұрын
Hi Jon, I agree with your comment and, trust me when I say, most mechanics would prefer good 'ol fashioned mechanical systems...but unfortunately our manufacturers don't feel the same. They advance the technology on these machines and we are still required to repair them. So, as technicians, we have to run towards the technology and embrace it in order to keep up to date with technology.
@jondoherty3678
@jondoherty3678 3 жыл бұрын
William Riquelme But is the right way to go it's something this type of machinery doesn't need it just cause more down time for the shake of a electronic sensor when the machine would run fine if it was not fitted Pull the dip stick check the oil water in rad idiot lights are all you need
@jeyTv1431
@jeyTv1431 2 жыл бұрын
i learned how to trobuleshot
@jeyTv1431
@jeyTv1431 2 жыл бұрын
i,kim from Philippines
@TekamoHD
@TekamoHD 2 жыл бұрын
Right on! Check out our other videos too. Lots of learning resources coming out weekly.
@DAN182able
@DAN182able 3 жыл бұрын
Thank you guys for the work you do for us here! I learn technical English with your videos to be able to work around the world. Bc our profession has no boundaries! :)
@TekamoHD
@TekamoHD 3 жыл бұрын
We're so happy to hear our videos are helping! We'll keep making videos so if there's anything we can create to help, let us know. Which parts of the world has our profession taken you to so far?
@DAN182able
@DAN182able 3 жыл бұрын
@@TekamoHD Russia. Working at CAT dealer. I found your channel during the research for "Heavy Duty Equipment Technician in Canada".
@TekamoHD
@TekamoHD 3 жыл бұрын
@@DAN182able Awesome, glad you found us. Are you looking to work in Canada specifically or have you been looking at other places as well?
@DAN182able
@DAN182able 3 жыл бұрын
@@TekamoHD I've been looking to work in AU and NZ as well. But decided to consentrate on Canada. The only thing I'm aware of is a thorny road to get the RedSeal qualification in CA. I like this system of evaluation, it seems to be righteous, but I'm afraid to not to be able to feed myself before achieving it.
@MrCountryoutlaw
@MrCountryoutlaw Жыл бұрын
I have a pc 138 kamatso, it keeps blowing the fuses for the AC. The AC will run a while and than quit. Bad relay maybe? Any help or suggestions would be very helpful
@williamriquelme2147
@williamriquelme2147 Жыл бұрын
Hi Scott, apologies for my delayed response, I assume you have repaired by now and when you say AC, I assume you mean the blower motor? First of all make certain that you are using the correct fuse, then check all connections (make certain all electrical connections and grounds are tight). I would disconnect it and check to see if it spins freely and there is no drag, if bushings are worn you feel a drag or some side to side play (in this case motor may need to be replaced). Just for testing purposes, you may also want to swap out the relay with another less useful (not important) relay. Look for any melted insulation or hot wires, faulty or loose switches - heat creates resistance in a circuit and will blow fuses. I hope this information helps.
@jerReloao
@jerReloao 2 жыл бұрын
How to repair SMR please!
@renesolaire8319
@renesolaire8319 Жыл бұрын
Hello ! Very interesting ! How to do remove the slider front windshield on a Komatsu pw130es-6 ? My rollers needs to be changed, but it seems the 4 rollers pins to be welded on the windshield frame, so I don’t see how to remove it !!! Thanks ….
@williamriquelme2147
@williamriquelme2147 Жыл бұрын
Hi Rene, Check out the link below, it may not be an exact machine make and model but it may be a similar removal procedure. There is always a way to remove these rollers, that may be pressed on to the shaft pins. I hope this helps. kzfaq.info/get/bejne/sLadnJaDvp7Mdnk.html
@renesolaire8319
@renesolaire8319 Жыл бұрын
@@williamriquelme2147 hello and thank you for your effort. Actually I have finally found the way, it was very tricky. It was necessary to remove the « sky » of cabine, Also necessary to put the seat at correct angle. After removing the rear lock, it was possible to slide the windows fully rear and it would pass thru openings. I remade the rollers with 3D print rollers I designed. Works fine now 😀. The trick was nobody would guess it’s possible , once the sky removed it appeared
@otheusischirosathanatos1035
@otheusischirosathanatos1035 3 жыл бұрын
This is great please keep doing videos like this specially hydraulic troubleshootings
@Tom-pn5sk
@Tom-pn5sk 11 ай бұрын
Why can't you show blower motor removal
@Evergreenbusinesshub
@Evergreenbusinesshub 3 жыл бұрын
Great video and nice Camera skills as well..I had to Subiscribe well done.. does HD Technicians do Trucks or is it totally different? Thanks
@williamriquelme2147
@williamriquelme2147 3 жыл бұрын
Hi Mo, Thanks for your kind words, our Media Team is very talented and they can do wonders with their cameras, they even make me look good, LOL. To answer your question, some truck shops will accept HD mechanics but others will not. you have to do some research and call around. Also, if you are a truck mechanic, you may be eligible to get credit for your experience. Contact the local ITA to learn more about it. www.itabc.ca/
@TekamoHD
@TekamoHD 3 жыл бұрын
Thanks for the kind words, Mo! Our Media Team appreciates the feedback.
@Evergreenbusinesshub
@Evergreenbusinesshub 3 жыл бұрын
@@williamriquelme2147 My Pleasure and thanks for your input
@amindadilshan9808
@amindadilshan9808 3 жыл бұрын
gread 🥰
@TekamoHD
@TekamoHD 3 жыл бұрын
Thanks for the kind words.
@jameslindley924
@jameslindley924 2 жыл бұрын
Think there's a resistor which fails so maybe not the Motor
@williamriquelme2147
@williamriquelme2147 2 жыл бұрын
Hi James, Your comment on the resistor is well noted and that is why I like to bypass the entire control circuit and power up and ground the fan directly which identified the motor as being the issue. Thanks.
@phankhoa8899
@phankhoa8899 2 жыл бұрын
Great video, thank you so much, I learn a lot of thing from you.
@TekamoHD
@TekamoHD 2 жыл бұрын
Thanks, Phan. Appreciate the comments. Let us know what you think of our newer episodes as well!
@user-df9yn4hh2q
@user-df9yn4hh2q 2 жыл бұрын
Hello sir, I have a new Komatsu 210....2002c_7 excavator. The temperature rises to 80. I hope you can help me reduce the temperature. Thank you for your efforts.
@williamriquelme2147
@williamriquelme2147 Жыл бұрын
Hello ابو محمد العراقي, You should know better about seeking help. You would need to provide much more information about the machine operation and status of when it is overheating. I assume you are referring to 80 degrees Celsius??? If it is equipped with an EGR System, then the top temperature may be up to about 230F which is approx. 110 degrees Celsius.
Stay on your way 🛤️✨
00:34
A4
Рет қаралды 21 МЛН
Дарю Самокат Скейтеру !
00:42
Vlad Samokatchik
Рет қаралды 9 МЛН
What NOT to do in an Excavator | Heavy Equipment Operator Training
13:40
Heavy Metal Learning
Рет қаралды 1,6 МЛН
Troubleshooting and Diagnosis - Cam's Approach (Truck Talk #1)
21:17
Bulldozer Training (Beginner) | Heavy Equipment Operator Training
31:30
Heavy Metal Learning
Рет қаралды 359 М.
Excavator Final Drive Removal On A Hitachi 150 Excavator
31:44
Tekamo HD
Рет қаралды 124 М.
Fixing electrical problems on the Yanmar excavator
16:43
Andrew Camarata
Рет қаралды 646 М.
Кто проедет перекресток первым?
1:00
AutoWell | ПДД
Рет қаралды 853 М.
Tuning a 270+whp Kawasaki H2R
0:13
Jahir motovlog
Рет қаралды 6 МЛН
Bike trick and Bro's aura...
0:11
Banza Edits
Рет қаралды 8 МЛН