Setting crankshaft end play - John Deere two cylinder
Рет қаралды 3,459
Күн бұрынSetting the crankshaft end play on a John Deere two cylinder tractor, specifically a model 50 (same as 520, 530, 60, 620, 630, 70, 720, 730, and letter series)
#johndeere
@641Junkies 3 ай бұрын
Legend has it, that tractor has 10 hours on it and that torque wrench has not come loose. 😂 Great video. This'll give me some idea on my A.
@westtennesseefarming288 2 ай бұрын
Never measure from the flywheel it’s too rough to get a good reading only use the ring gear learned that one the hard way and caused some frustration when trying to set it on a 630.
@michaeledler2968 Ай бұрын
do u need to buck the clutch side before you adjust the flywheel seen a few videos where they did
@oakwoodstockfarm7017 Ай бұрын
@@michaeledler2968 I did not
@dadigitechman 5 күн бұрын
JD shop manual procedure includes engaging and disengaging the clutch to determin the end play.
ZK MasterTech
Рет қаралды 104 М.
Dirt,Grain & Steel
Рет қаралды 7 М.
Taper lock flywheel knocking noise JD720D/730D corrective steps including seals and setting endplay.
Former Farm Kid
Рет қаралды 238
zeketheantiquefreak
Рет қаралды 82 М.
Dirt,Grain & Steel
Рет қаралды 17 М.
Good Works Tractors
Рет қаралды 1,3 МЛН