Setting FLsun V400 "Z" Height

Рет қаралды 6,932

Жыл бұрын

Many of you have asked how I get a perfect first layer every time !!!
Here are my tips and tricks...
Special thank-you to my little girl Kaili for helping me produce this video. This video required allot of moving back and forth and she did a great job.
Thank you Buddie !!!

Пікірлер: 43

@NewEnglandReptile 6 ай бұрын

Great explanation!!! Thank you.

@dennisgignac5103 6 ай бұрын

Thank you very much !!!

@royp1993 8 ай бұрын

Thank you sir! i have been having issues for a week and i could not get it dialed in. watching you fine tune everything while it was printing solved it for me!

@flsun3dprinter Жыл бұрын

oh friend! I have to say, you are really professional! Looking forward to your updates!

@samgutz80015 3 ай бұрын

This is great information. Thank you!

@dennisgignac5103 3 ай бұрын

Thank you for the kind words...

@fuxx0r1000 Жыл бұрын

Awesome video. Thanks dude! I've been struggling with the real fine tuning, this is a great help.

@degen2789 8 ай бұрын

Your videos have been so helpful thank you

@qozia1370 9 ай бұрын

Thank you! Better than the official FLSUN videos!

@dennisgignac5103 9 ай бұрын

Thank you very much...

@bettydaltonnewbold2019 10 ай бұрын

Your videos are the best! Thank you very much!

@dennisgignac5103 10 ай бұрын

Thank you Betty !!!

@thedirtygringo127 11 ай бұрын

This was really a helpful video - thanks for taking the time make it. I was having some issues with my V400 and this helped me better understand the layer height and how to adjust.

@dennisgignac5103 11 ай бұрын

You are very welcome...

@randomgamesgroup 7 ай бұрын

SEN MÜKEMMEL BİR ADAMSIN

@dennisgignac5103 7 ай бұрын

Thank you very much...

@RomanMauser Жыл бұрын

Greetings from Ukraine! Thank you for this video!

@dennisgignac5103 Жыл бұрын

Thank you !!!

@warriors475 6 ай бұрын

hi i have updated to the new 1.4 version and the calibration menu has changed no more bed mesh seems to do it all in one now but when the screen changes to the move 0 the z offset is showing 0.00 and when press the move 0 it comes down but the head seems to hit the bed why is that and do i just move the head up until the paper is sliding with a little residents need some help please also flsun has a printer.cfg file on there website with the 1.4 update do i have to copy that to my machine and over write the original printer.cfg file not much info about it on the net can you do a video of the calibration sequence please

@rickbowler9559 Жыл бұрын

Great info as always. Do you have a link to your first layer print test? thank you

@dennisgignac5103 Жыл бұрын

drive.google.com/file/d/11W2RsWC_Pruv_rSv2Wq6_anhL-q1sjtK/view?usp=sharing

@erkned Жыл бұрын

@@dennisgignac5103 Hmm, something strange happens when using this file on my v400. Right before the print is about to start, it unloads the filament, retracts fully so the entire filament just ejects from the extruder

@qozia1370 9 ай бұрын

@@erkneddon't follow anything from the official FLSUN team, they are bad. Just make a cube in your cad software and go from there.

@Psplord79 Жыл бұрын

Great like usual. Dennis can you share your slicer config file? What slicer You use cura or prusaslicer. Thanks you

@dennisgignac5103 Жыл бұрын

Here you go... I use Cura 5.1. NOT the new versions... drive.google.com/file/d/10RmxVnZkCmoCjXUEacHS3XW596eKlA2g/view?usp=sharing

@Psplord79 Жыл бұрын

@@dennisgignac5103 thanks again 😁

@coldlamper71 10 ай бұрын

How does klipper know what the offset between the nozzle and probe is? Do you have to set it before hand? Every time i do this the print starts around the "nozzle to probe offset" which is about 16mm off the bed.

@dennisgignac5103 10 ай бұрын

Hello Brian: Please contact me through email and I will try to help... dgignac@flsun3d.com

@coldlamper71 10 ай бұрын

@@dennisgignac5103 I think I got it. It seems i had to z calibrate before the bed calibration. I may have gotten the config files messed up before I tried following your video.

@zill54 2 ай бұрын

Mine does not have see bed mesh setting

@dennisgignac5103 2 ай бұрын

Yes, if you V400 Pad is on firmware V1.4, it included the bed mesh in the first calibration...

@SeniorLegendOfficial Жыл бұрын

my flsun v400 cant print overhangs that well and idk why

@ulforcemegamon3094 11 ай бұрын

Have you tried printing the improved fanduct ? it Will make overhangs easier to deal with

@sage5483 3 ай бұрын

Is there a way I could get the test print file??..

@dennisgignac5103 3 ай бұрын

Sure, here is the g-code file... drive.google.com/file/d/11W2RsWC_Pruv_rSv2Wq6_anhL-q1sjtK/view?usp=sharing

@sage5483 3 ай бұрын

@dennisgignac5103 dang..thanks man!!!!!!!..

@Brouk10 Жыл бұрын

But it is not working all over the bed :(

@dennisgignac5103 Жыл бұрын

Can you please explain?

@Brouk10 Жыл бұрын

@@dennisgignac5103 i only can print in a maximum diameter of 150 - 200mm. If i try to print on the whole printbed it doesn't work. Some areas looks smashed. It seems the printer is ignoring the bed mesh. I think i tried everything.

@dennisgignac5103 Жыл бұрын

Can you please contact me through email and I will try to help... dgignac@flsun3d.com

@derickkruger5680 7 ай бұрын

Hallo Dennis It seems you have a number of FLSun printers in your workshop. Fistly, have you tried to print something using the full 300mm diameter and secondly, have you tested a larger nozzle e.g. 1mm to test max extrusion? Would you considder the new T1 or S1? Merry Xmas from South Africa.

@dennisgignac5103 7 ай бұрын

Yes, being the USA rep for FLsun. I have all of their printers set up to help people... I have not printed any model that wide. But I have printed the test pattern to about 280mm. I have not tried the 1mm nozzle. Only the .4 and the .6 When the S1 and the T1 are shipping, I will be one of the first to get one... Big Smile

@derickkruger5680 7 ай бұрын

@@dennisgignac5103 Thank you Dennis. I dont know when we will see the S1/T1 here in SA, but cannot wait. It is going to be perfect fir my productuon line. If i can ask you a fav, would it be possible to test the claimed 300 dia on the FLSun 400 with a 1 mins vid? Much appreciated.