Setting Up the Lathe for Cutting 60 degrees Threads

Рет қаралды 9,834

3 жыл бұрын

In this tutorial we will be learning about:
- How to set up inch and metric threads in the different brand and models of a lathe machine.
- How to set up the set of gears in the gear train.
- How to determine a change gear type, semi quick-change and quick-change gear types lathe machines.
For any suggestions please comment down below :)
Don't forget to support me by clicking the like and subscribe buttons.
And don't forget to share! :D
#lathe
#lathe_machine
#threading_operation

Пікірлер: 37

@michaelwong3634 2 ай бұрын

Thank you po Prof. Johnny sa video very informative and easy to understand

@profjohnny8624 2 ай бұрын

Glad it was helpful!

@eduardomaterum9514 10 ай бұрын

Cant stop from wayching this video. so impressive and informative!

@miguelbuillerey4112 3 жыл бұрын

Sarap panoorin sir habang kumakain nabubusog ako sa info salamat sir!

@profjohnny8624 3 жыл бұрын

pinalulundag mo aking puso Mr Miguel, thank you and keep safe always!

@gianoriarte6465 3 ай бұрын

Nabusog sa info sir thank you

@kennethpanizales2474 3 ай бұрын

Thankyou for this Informative Video Prof Johnny

@profjohnny8624 2 ай бұрын

My pleasure!

@wengzkiegameyard8260 3 жыл бұрын

napaka informative at napaka galing mag explain...

@profjohnny8624 3 жыл бұрын

thank you Wengzkie for such an encouraging remark and for subscribing. keep safe always!

@janinealexisesguerra5971 3 жыл бұрын

Nakakamiss naman po diyan sa Goodwill Sir! Keepsafe po lagi sir! Godbless po~

@profjohnny8624 3 жыл бұрын

thank you Janine and keep safe too and God bless!

@sinadaneshkhah8537 Жыл бұрын

Hello thank you for sharing your videos. Please make some videos about cutting different therads whith small lathes. I’m sure alot of people searching for that.

@jaybarbecho2597 2 жыл бұрын

Magandang araw po prof johnny ako po yung nag inquir kanina jan... maraming salamat po napaka bait nyo po at napaka linaw mo po mag paliwanag.hehe😊 .. god bless you po..❤❤

@profjohnny8624 2 жыл бұрын

hehe, diko inasahan na maririnig ko yan sa u, nakakataba ng puso. 🥰Thank you for subscribing. Just do your best in everything that you do and God will do the rest. keep safe!

@rhapyaboganda2647 Жыл бұрын

good

@miguelbuillerey4112 3 жыл бұрын

Pashout out sir

@roaldacero4876 2 жыл бұрын

👏👏👏

@profjohnny8624 2 жыл бұрын

Thank you Roald. God bless!

@soyeb963 2 жыл бұрын

How to chase dial indicator for 1.75 mm thread cutting?

@profjohnny8624 2 жыл бұрын

Hi Allah, same method that i have performed in my tutorial video about CUTTING 60° THREADS BY THE USED OF LATHE MACHINE. the only difference is the number of teeth of the worm gear to be set for the chasing dial that will engage to the lead screw. in the wasino and takisawa brands of lathe, the number of teeth of worm gear is 21 while in some other brands like mazak is 14 teeth. and of course you must also look on the letter (inline with 1.75 located in the plate of chasing dial) in which the chasing dial must be engaged for every cut/pass of the tool in the workpiece. Thank you for watching and subscribing. God bless!

@sinadaneshkhah8537 Жыл бұрын

Hello Ihave one qoetion: Whith small lathe like the lathe in the first this video is possible to cut acme therad?

@profjohnny8624 Жыл бұрын

Hi Sina, yes, it could cut acme thread same as bigger lathe can do. It's all in the machinist. Thank you for watching and subscribing. God bless!

@gearupracing5588 3 жыл бұрын

Sir mazak mate din po yung torno ko kakabili ko lang at wala po siya kasamang pamalit na gear. 76t spindle gear 88t N1 intermediate gear 60N2 intermediate gear 104 lead screw gear. Yung mga naka kabit po na gear is wala sa gear chart. Makaka kumpleto din po ba ako nang threading pag yan lang ang gear?salamat po

@profjohnny8624 3 жыл бұрын

Bakit kasi hindi ka sakin bumili? hehe, nasa loob ng takip ang gear chart nakahiwalay sa thread chart hindi katulad ng ibang brand na magkasama sa isang plate.

@arielmallari9130 Жыл бұрын

TUP manila kayo sir

@rommelfortades8783 Жыл бұрын

The best set of tutorial videos I have viewed so far. Can you send me your address so I can visit your school. And can you send me details about your classes. Thanks.

@gerylanalura3446 3 жыл бұрын

Sir matibay po ba ganyan mini lathe machine po. Ano maximum diamiter pwede isalang sa mini lathe na ganyan po.

@profjohnny8624 3 жыл бұрын

Hi Gery, tama lang ang tibay para sa kanyang laki, depende din minsan sa mga gagawin mo pyesa, ang pwede isalang ay 6 3/8 x 12 inches.

@gerylanalura3446 3 жыл бұрын

Salamat sir sa pg sagot sa tanong ko po. Godbless po sa inyo😇

@ramildoroja5377 Жыл бұрын

sir johny anu po tawag at gamit ng lever na katabi ng roman numeral na lever sa MAZAK na brand yung right sidepo na lever katabi po ng roman numeral pls po naguguluhan po ako salamat po sir

@profjohnny8624 Жыл бұрын

Hi Ramil! ang lever na yon ay para sa automatic feed at threading. kung alam mo na ang main parts ng lathe machine ay isa yon sa minor parts ng quick change gear box. Salamat sa patuloy mong pagsubaybay sa aking tutorial videos. God bless!

@ramildoroja5377 Жыл бұрын

Maraming salamat po sir jhony

@jasonvictorio527 Жыл бұрын

Idol magkano ung ganyan na lathe machine?

@profjohnny8624 Жыл бұрын

Hi Jayson! 60,000.00 kung may time ka ay pumasyal ka dito at baka magustuhan mo ang iba kong lathe machines. Thank you and God bless!

@markanthonypalomar3440 Жыл бұрын

Sir bakit po 29 di 30 para tumama po sa 60 degs. Tanung kulang po sir di ko kasi alam yung reason bakit ganun.

@profjohnny8624 Жыл бұрын

Hi Mark, Bago ko sagutin ang tanong mo ay pakiwatch muna ang aking video tungkol sa CUTTING 60° INTERNAL TREAD at baka don palang ay masagot na ang tanong mo. Thank you and God bless!