Cutting 60 Degrees Threads By The Use Of Lathe Machine

Рет қаралды 17,340

Күн бұрын

In this video we will be learning about;
- How to cut 60 Degrees threads by the use of chasing dial and forward/reverse
- How to calculate the depth of thread, width of crest and the root.
- How to reset the threading toolbit to an unfinished thread
For any suggestions please comment down below :)
Don't forget to support me by clicking the like and subscribe buttons.
And don't forget to share: 👍👍 :D
Thank you!
#lathe
#lathe_operations
#60_degrees_threads

Пікірлер: 140

@patricktividad9706 2 ай бұрын

I love how the video incorporates real-world examples, helping to apply the concepts in practical scenarios. Thank you sir!

@profjohnny8624 Ай бұрын

Glad you enjoyed it!

@JOHNKENMEJIA 2 ай бұрын

Your lathe machine tutorials are fantastic, Prof. Johnny! They're so easy to follow, and I've learned a lot from them

@profjohnny8624 Ай бұрын

Glad you like them! Thank you, John.

@gianlawrencemiranda4336 2 ай бұрын

Marami akong natutunan, napakadali ng kanyang step by step procedure na tinuturo at madaling intindihin. Maraming salamat po!

@KevinDaveSabile 2 ай бұрын

Engaging Presenter, It’s refreshing to learn from someone who genuinely loves the subject matter.

@profjohnny8624 Ай бұрын

Glad to hear that! Thank you.

@alronejierosaculles760 2 ай бұрын

Thank you, Prof Johnny for the detailed step by step procedure and the information about the two method which is the chasing dial method and the forwad reverse method.

@profjohnny8624 Ай бұрын

Glad it was helpful! Thank you.

@cryogelatin1952 2 ай бұрын

Your tutorial videos are excellent! I learned a lot! From Bentabal, BSME 1-C.

@samweldtv 2 жыл бұрын

This channel deserves a million subcribers.

@profjohnny8624 2 жыл бұрын

I truly appreciate the support! Will keep on running this channel for the sake of helping and sharing the knowledge and skills about machine shop works. I hope that you continue to enjoy learning from the videos and if you have any more questions, I'm here to answer them. Thank you!

@samweldtv 2 жыл бұрын

@@profjohnny8624 We are grateful to have you unselfishly share your knowledge on this subject. It is a very big help for me as an instructor to have solid input coming from a Professor like you. Truly you are one of a kind. God bless you more Prof Johnny.

@angelsintos2491 2 ай бұрын

By watching this video, it helps me to learn a lot about the capability of the lathe machine. Looking forward to have more videos like this!

@profjohnny8624 Ай бұрын

Awesome, thank you!

@medianamargarett 2 ай бұрын

It gives me more knowledge on how to do the threadings! Thank you sir for making it much easier to learn for us students!

@profjohnny8624 Ай бұрын

Keep watching. Thank.you.

@markmangco461 Ай бұрын

Thank You for the tutorial Sir Johnny. Very informative and also helpful for my project.

@KristineMayRamos 2 ай бұрын

This video is exactly what we need for our project. Thank you sir, this is very useful☺️

@profjohnny8624 Ай бұрын

Glad it was helpful!

@Zolariq-uq1wp 2 ай бұрын

A detailed and informative step by step procedure, A very helpful tutorial video

@profjohnny8624 Ай бұрын

Glad it was helpful! Thank you Zolariq.

@jrabot2035 Жыл бұрын

Hello sir salamat sa video po watching you from Davao City im not machines but i love it to learn☺️☺️☺️

@rykosanchez9572 2 ай бұрын

I learned a lot from this video.

@michaelwong3634 2 ай бұрын

Thank you po Prof. Johnny sa video very informative and easy to understand

@profjohnny8624 Ай бұрын

You are welcome. Thank you for subscribing!

@lanceramos956 2 ай бұрын

Thank you for this wonderful video tutorial, Prof Johnny. I will absorb this video tutorial for me to improve my skills when it comes to machining, and when it comes that I will actual on it.

@profjohnny8624 Ай бұрын

You're very welcome!

@SeletariaRafael 2 ай бұрын

Thank you for this very informative video Prof Johnny. What a nice!!

@profjohnny8624 Ай бұрын

My pleasure! Thank you too.

@cat02791 3 жыл бұрын

Perfect as always.. thanks.

@profjohnny8624 3 жыл бұрын

Thank you sir Abdelrahman for continuously watching may tutorial videos, making me more inspired to do more videos. keep safe always and God bless!

@jezzzedryxsolina2996 2 ай бұрын

Thankyou for additional knowledge Sir Johnny it helped me a lot and we were going to do something like that too luckily I watched this video it shows that mastering this skill makes it possible to make threaded components precisely and accurate thread cutting process.

@profjohnny8624 Ай бұрын

Glad it helped. Thank you.

@keannperlawan1536 2 ай бұрын

Thank you prof Johnny, I learn a lot of this video

@profjohnny8624 Ай бұрын

Glad to hear that. Thank you.

@AprilRoseToraja 2 ай бұрын

thank you po prof johnny, I learned a lot po! 👏🏽

@profjohnny8624 Ай бұрын

Happy to hear that!

@eduardomaterum9514 9 ай бұрын

excellent tutorial lesson

@arahmaecabuhal3571 2 ай бұрын

thank you for this informative video, prof!

@profjohnny8624 Ай бұрын

You are very welcome

@dangga8300 2 ай бұрын

This video will really help me when doing the project

@profjohnny8624 Ай бұрын

Glad to hear that! Thank you.

@johnharveyolivar5902 2 ай бұрын

Thanks prof Johnny!

@profjohnny8624 Ай бұрын

Welcome and thank you too!

@donmoises2157 2 ай бұрын

The tutorial is very helpful and knowledgeable which can help me for my project and in the future

@profjohnny8624 Ай бұрын

Glad it was helpful!

@rodelbuscas9978 3 жыл бұрын

You are the best Prof Johnny! Eto napo pinakahihintay kong tutorial video. Keep it up and God bless po!

@profjohnny8624 3 жыл бұрын

thank you Rodel for continuously watching my tutorial videos. hope you learned something from it. keep safe and God bless too!

@eldiejunmapa5852 3 жыл бұрын

Very good and informative.God bless you Prof.Johnny!

@JjOcsan 2 ай бұрын

Very informative sir thank you we can now apply it to our lessons

@profjohnny8624 Ай бұрын

So nice of you. Thank you too.

@youraveragegamer934 2 ай бұрын

Very entertaining and informative video sir especially for practical lessons

@profjohnny8624 Ай бұрын

Many thanks.

@kennethpe6248 2 ай бұрын

Nice video!

@profjohnny8624 Ай бұрын

Glad you enjoyed it

@medwinvilla571 2 жыл бұрын

God bless po sir

@leonykaindoy9794 2 жыл бұрын

Prof. Johnny. I believe yuo.

@profjohnny8624 2 жыл бұрын

Thank you Leony for such an encouraging remarks! Have a Blessed Day!

@enriquevillafania5213 3 жыл бұрын

Done subscribe sir.. Thanx po

@soyeb963 2 жыл бұрын

Could you make one video for cutting 1.75mm external thread?

@rg.976 2 жыл бұрын

Prof Jhonny gawa ka naman ng tutorial video for multiple entry threading. Thank you.

@profjohnny8624 2 жыл бұрын

Thank R.G for watching and subscribing. Yes, i will be making a tutorial video about what you have requested. Please wait for it. God Bless!

@samweldtv 2 жыл бұрын

What was the term you use on the blue ink you put before the scratch turn?

@profjohnny8624 2 жыл бұрын

Hi Samuel! the term I used was blue dye. Thank you and God bless!

@mcfacto1249 3 жыл бұрын

Sir saan po ang training center nyo??gusto q po sana mag training ng lahte machine

@tim23494 3 жыл бұрын

Hey Johnny could u tell me how exactly you calculate the compund rest in feed (1.85mm).

@profjohnny8624 3 жыл бұрын

Hi Tim, you may use the trigonometric function to find for the hypotenuse. 1.62/cos29deg. Thank you for watching and subscribing. stay safe!

@glennsoto8413 Жыл бұрын

add san po pwede magaral ng machinist lesson sir please give morw information many thanks po

@glennsoto8413 Жыл бұрын

sir,johnny give more information more lesson about machining works

@mitudas2800 Жыл бұрын

Pls can you give a video lesson for compound rest setting for threading of 50 degree Graduation . Bcz till how many ships i sailed i found a lathe in 50 graduation.

@profjohnny8624 Жыл бұрын

Kindly take a picture of the compound rest of your lathe machine and send it to me so i can give you a better advice. Thank you.

@mitudas2800 Жыл бұрын

Dear sir, good day. Here I can't attach a photo of the my lathe compound rest slide Graduation. Plz may i have another alternative way that i may communicate with YOU. It will be a great help for me.

@reyaplod527 Жыл бұрын

Sir good evening po and happy new year!!! Ako nanood ng Vlog niyo regarding sa paggamit ng Lahte Machine, meron po sana akong tanong sir kung meron po kayong kinaconduct na training please sent me a Details sir?👍👍👍🙏🙏🙏

@profjohnny8624 Жыл бұрын

Hi Rey! yes, may short course training kami dito sa GOODWILL TRAINING AND ASSESSMENT CENTER INC. Blk 48 lot 14 Justice St., Goodwill Homes 1 San Bartolome, Novaliches, Quezon City. You may also contact me at my cell phone no. 09166580548. Thank you for watching and subscribing to my youtube channel.

@josellanera6082 Жыл бұрын

Good day. I want to learn how to operate a lathe machine. Where and what school is that. Thank you.

@profjohnny8624 Жыл бұрын

Hi Jose, GOODWILL TRAINING AND ASSESSMENT CENTER INC. blk 48 lot 14 Justice St., Goodwill Homes 1 San Bartolome, Novaliches, Quezon City. Thank you and God Bless!

@vijendrakumar1648 Жыл бұрын

Hello sir please drill cutting edge grinding prepare agale

@JoseHernandez-dj9ce 3 жыл бұрын

Request ko po sana ung tutorial video para sa triple lead threading?

@profjohnny8624 3 жыл бұрын

Thank you Mr. Hernandez for watching and subscribing. i will do that after a few topics. Keep safe and God Bless!

@JoseHernandez-dj9ce 3 жыл бұрын

@@profjohnny8624 Thank you Prof Johnny, take care always!

@mebra_homeshop 2 жыл бұрын

Hi Prof. Johny, thanks for videos, a great series of machinery. 8 go a question, which of two methods cause more wear in split nit , chasing dial or forward reverse method? Or both of them cause the same wear. (You say that part in your own language 😉 I cannot realize)

@profjohnny8624 2 жыл бұрын

Hi Mr. Mehdi, firstly, thank you so much for watching and subscribing to my youtube channel and asking such question. The forward and reverse method in thread cutting could easily wear out both the split nut and lead screw since they are engaged all the time during threading operation.

@mebra_homeshop 2 жыл бұрын

@@profjohnny8624 yes, you're right, it's engaged at least twice the other method. I doubted because when the carriage is return omg to right side of worpiece , since the cutter is not cutting and there is almost no load on the split nit and screw.

@miguelsaguid1319 3 жыл бұрын

Sir thanks po sa additional knowledges, tanong ko lang po may chart din po ba para sa inch compound rest settings. Thanks po.

@profjohnny8624 3 жыл бұрын

Hi Miguel, meron din sa inch kung ang tinatanong mo ay para sa threading.kung kelangan mo ay pwede ko send sa u. thank you for watching my tutorial videos continuously. keep safe!

@miguelsaguid1319 3 жыл бұрын

Kung okay lang po sir, thanks po in advance 👍.

@profjohnny8624 Жыл бұрын

@@miguelsaguid1319 Hi Miguel, san ko pwede isend yong request mong chart?

@mitudas2800 Жыл бұрын

Dear sir good day. In your video, seen you set the compound rest in degree. Why you did? How YOU set the degree in compound rest plz explain. For inch how many degree we set if compound rest have only 50 degrees in left and right.

@profjohnny8624 Жыл бұрын

Hi Mitu! when you are going to cut 60° thread, you may set the compound rest half the included angle of the thread or 29 to 30 degrees to right for a right hand thread, and to the left for a left hand thread. But the reading in the compound rest of the lathe is 59 or 60 graduations. But since your lathe machine has only 50 graduations on its compound rest, you may need to use some aided device such as steel protractor to set the compound rest to the required angle. Thank you for subscribing and for your question. I hope i answered it clearly.

@mitudas2800 Жыл бұрын

@@profjohnny8624 this 29 will be calculation by 90-29=61 degrees? For bsw thread (55') how much will we set for compound rest? Pls can you give a video lesson for compound rest setting for threading of 50 degree Graduation . Bcz till how many ships i sailed i found a lathe in 50 graduation.

@aquila1706 Жыл бұрын

Prof. Sa machining po ba tinuturo din ung cnc machine operator

@profjohnny8624 Жыл бұрын

Hi Aquila. Sa aking training center ay conventional machining lang. Thank you and God bless!

@enriquevillafania5213 3 жыл бұрын

Gamit ko kasi sir na formula which is TD= 0.613 X Pitch Correct me sir if im mistake. Thanx po Halimbawa: M24X30 Td=0.613x30 = 1.839

@profjohnny8624 3 жыл бұрын

Yan ang luma nating formula Enrique, nong lumabas ang new ISO metric thread ay naging .54127 x pitch na.

@johnraymacato8009 3 жыл бұрын

Prof,pinapalitan din po ba un worm gear sa dial?

@profjohnny8624 3 жыл бұрын

Yes John Ray, kung ano ang required na worm gear para sa gagawing thread ay un ang itatapat sa lead screw. makikita un sa label o plate na nasa harap ng dial. thank you for watching and subscribing. keep safe and God bless!

@profjohnny8624 3 жыл бұрын

@johnraymacato8009 2 жыл бұрын

maraming salamat po Prof. Johnny💪💪

@thomuelgorimbao6101 2 жыл бұрын

Sir saan po ang training center nyo

@profjohnny8624 2 жыл бұрын

Goodmorning thom! dito lang sa blk48 lot14 justice St. Goodwill homes 1 San Bartolome Novaliches Quezon City, or pwede mo rin gamitan ng waze (Goodwill training and assessment center inc.) Thank you for subscribing.

@EnricoTubig 2 жыл бұрын

Saan po pwede school niyo?

@profjohnny8624 2 жыл бұрын

Hi Enrico, our training center is located at Blk 48 Lot 14 Justice St., Goodwill Homes 1 San Bartolome, Novaliches Q.C. Thank you for subscribing.

@Justo881 3 ай бұрын

Magandang araw sir. Paano mag thread sa Cosmo ace mitsuhata LMD-2000 lathe machine?

@profjohnny8624 2 ай бұрын

Hi Justo, kung CNC lathe yan ay gawin mo muna ang program ng para sa thread. Pero kung conventional lathe ay gayahin mo lang yong tutorial video ko tungkol sa Setting Up the Lathe for Threading at How to Cut V-shape thread in the Lathe Machine. Thank you for watching and subscribing.

@Justo881 2 ай бұрын

@@profjohnny8624 cosmo ace mitsuhata lathe machine LMD-2000 - Google Search www.google.com/search?sca_esv=aa70acbcf6aac4c2&sca_upv=1&q=cosmo+ace+mitsuhata+lathe+machine+LMD-2000&uds=AMwkrPtNPyphwSdpvfASnpzJlGm54pQVeBiELoS2oQyiv1NWGL2vGA_k6TvFSdxAAvfr-qdNZqfk7wn8tBJwhTo2jkK0gfJHce5wKkRylErTlMKU0kQqmc_E1O01Bv49EO_CCZfqTm4GgpUgRykRbb1BXoPt4HQnT-Qqo8yCFpC22AUJkMeGccf2C4B8BGpkbjm7xvt2jwuq1G5x7AFrjw3Z2dw1L8ba627LKrPl62Mo3nly0LWPGdW4ggqJxZNRzsjAasRBB4GnIhhVe1G4HtL_8D3pXRQ-qTRCvFuJcFli39JrKNgKKGSZ31yJdVSzYczSr7RDEIO-6RcgvGdOHQvU9IHR2fAxGw&udm=2&prmd=isvnmbtz&sa=X&ved=2ahUKEwjHtq7f-L2FAxW3bmwGHc95B-gQtKgLegQIERAB#vhid=00Uokpr0Vug2yM&vssid=mosaic

@Justo881 2 ай бұрын

Yan po yung itsura

@mcfacto1249 3 жыл бұрын

Sir good day saan po yung training center nyo??gusto q po sana mag training ng lahte machine

@profjohnny8624 2 жыл бұрын

Good day Mr Mc Facto, Goodwill Training and Assessment Center Inc. blk 48 lot 14 justice st. goodwill homes 1 san bartolome, novaliches q. c. Thank for subscribing. God bless!

@mcfacto1249 2 жыл бұрын

@@profjohnny8624 sir magkano po lahte machine training nyo at ilang months??

@profjohnny8624 2 жыл бұрын

Give your me you cell phone no. and i will call you.

@mcfacto1249 2 жыл бұрын

@@profjohnny8624 09954407631 or pwd nyo po aq ma email??mcfacto23@gmail.com mahina po kasi yung signal ng globe at smart sa lugar q po sir kasi nasa remote erea po kami banda.pro may wifi po kami pwd rin po sa messenger kayo mg msg.maraming salamat po sir gusto q talaga matuto ng lahte machine kailangan q po ng tulong nyo..godbless po

@ranulfobaldevia5251 Жыл бұрын

Boss walang revers

@enriquevillafania5213 3 жыл бұрын

Sir paano nyo nakuha yong 1.62 na thread depth nya.. Ano ba formula nyo.. Salamat po

@profjohnny8624 3 жыл бұрын

Hi Enrique, the formula is on the last part of the video, please go over the video again. thank you for subscribing.

@markanthonypalomar3440 Жыл бұрын

Sir tanung kulang po bakit po 1.85mm depth of sa compound rest e ang actual ay 1.63mm lang aning pong reason sir? Gusto kulang malaman kasi ngayun kulang nakita ang ganyan idea. Salamat pagsagot

@profjohnny8624 Жыл бұрын

Hi Anthony! 1.85mm dahil nakaset ang compound rest sa 29°. natural lang na hahaba ang distance mula sa zero degree na set up na may distance o lalim na 1.62mm. kung paano nakuha ang 1.85 ay kelangan gamitan ng Pythagorean theorem. C=1.62/Cos29°

@markanthonypalomar3440 11 ай бұрын

Sir tanung kulang po bakit po ba naka set yung compound rest as 29degrees pwede po ba kahit sa 90degs. Ang set up makakuha parin po ba yung thread ng tama?

@ernitoponce5898 2 жыл бұрын

Hello sir paano po ang pag set up ng lathe threading for 11G 5/8" hindi ko kasi makita sa machine chart

@profjohnny8624 2 жыл бұрын

Hi Ernito, sa inches threads mo tingnan ung 11tpi, kung wala talaga nakasulat sa thread chart ay yan ang kulang ng lathe machine mo, may mga lathe kc na hindi kumpleto ang pitches ng threads, thank you for subscribing. God Bless!

@ernitoponce5898 2 жыл бұрын

Noted thank you sir

@jonaldbutuyan1694 3 жыл бұрын

San banda training center nyu sir

@profjohnny8624 3 жыл бұрын

Hi Jonald, dito sa blk 48 lot 14 justice st. goodwill homes 1 san bartolome, novaliches q c. Thank you for watching and subscribing. God blless!

@jonaldbutuyan1694 3 жыл бұрын

@@profjohnny8624 thanks sir.

@johnraymacato8009 3 жыл бұрын

Prof. Johnny pede po ba akong magtraining jan?

@profjohnny8624 3 жыл бұрын

Yes John, pumunta ka dito para madiscus natin ang proceso.

@johnraymacato8009 3 жыл бұрын

@@profjohnny8624San po ang address ng shop nyo Prof.?

@profjohnny8624 3 жыл бұрын

Blk 48 Lot 14 Justice St., Goodwill Homes 1 San Bartolome, Novaliches Q C.

@johnraymacato8009 3 жыл бұрын

@@profjohnny8624 salamat Prof. Goodbless sa inyo😊

@profjohnny8624 3 жыл бұрын

God bless you too John. keep safe!

@allensalazar310 Жыл бұрын

Hi sir paano po yung starting point gap ng workiece bago mo sya ingaged

@profjohnny8624 Жыл бұрын

Hi Allen! pakireword mo nga yong tanong mo para masagot ko ng tama. Yon ba layo ng toolbit sa workpiece bago iengage ang split nut lever? or lalim ng pakain (depth of cut)?

@allensalazar310 Жыл бұрын

@@profjohnny8624 hi sir thanks..i mean sir yung distance ng toolbit from live center to work pice po..hindi po kya mabura yung thread nya pg hinde nakuha yung distance nya TIA sir

@ramildoroja5377 Жыл бұрын

Sir johny diba 60degre yung tread bakit po 1.87 naka lagay naguguluhan po ako sir maraming salamat po sana ma pansin nyuo po

@profjohnny8624 Жыл бұрын

Hi Ramil, saan ba nakalagay ang sinasabi mong 1.87? wala ako makita sa video, baka ung 1.85 ang sinasabi mo which is the DEPTH SETTING of the compound rest set at 29° when cutting 60° external thread. Gamitan mo lang ng Pythagorean theorem. Ang actual na depth of the teeth of thread is 1.62mm. kung sinet mo ang compound rest sa 30° ay magiging 1.87 ang depth setting ng compound rest. Malinaw na ba Ramil? Thank you watching and subscribing.

@josellanera6082 Жыл бұрын

Good day sir prof. Johnny, do I need ba? To enroll in TESDA - before going to Goodwill Training place.tks

@profjohnny8624 Жыл бұрын

@@josellanera6082 Hi Jose, sorry for my late response. No need to enroll in TESDA, you may proceed directly to Goodwill Training and Assessment Center Inc. Thak you and God bless!

@ordna121982 Жыл бұрын

Sir bakit pumapatong twing uulit ako Ng pakain...

@profjohnny8624 Жыл бұрын

Hi Pogz, maraming dahilan kung bakit pumapatong ang pakain. Una, baka metric ang lead screw ng lathe mo at ang thread mo naman ay inches. Pangalawa, baka ung nakaengaged ng worm gear ng chaising dial ay sa lead screw ay hindi tama ang number of teeth. Tingnan mo sa plate na nasa harap ng chasing dial kung anong number of teeth ang worm gear para sa picth ng thread na gagawin mo. Pangatlo, Baka mali ang LETTER or NUMBER twing iniengaged ang chasing lever sa tapat ng reference line. Makabubuting panuorin mo uli ang aking tutorial video tungkol sa THREADING OPERATION (external). Maraming salamat sa panunuod at pagsubscribe. God Bless!