Setting Up Your Kiteboard: 2 Beginner Mistakes!

Рет қаралды 34,385

4 жыл бұрын

Setting up your kiteboard for the first time is simple right? It is but today I touch on a few things that will make sure your board is locked and loaded and has you looking like a pro next time you head to the beach! Check out the Tona Joyride - bit.ly/TonaJOYRIDE
Join the kite crew on Patreon - bit.ly/KiteCrew
KITEBOARDING GEAR I RIDE
Tona Kiteboarding - bit.ly/RideTona (Kites & Boards)
Levitaz Kite Foils - bit.ly/LevitazKitefoils
Ride Engine - bit.ly/RideTheEngine (Travel Bags & Kite Harnesses)
HELP SUPPORT MY CHANNEL
Kitesurfing T-Shirts & Hats - kelsickkiteboarding.com/apparel/
Paypal Support - bit.ly/JKPaypalSupport
Bitcoin Address - 1Jx6vKEwKxF7c8LUNfYYqaNVvQgonqUe6h
Camera Gear I Use - kit.co/Jakekelsick/youtube-gear
More Fun On INSTAGRAM!
Jake - / jakekelsick
Megan - / megananxo
Tona - / tonalife
Reach Out To Me On My Website
www.Jakekelsick.com
MUSIC
Intro - Fados - bit.ly/IntroTune
Main Songs - epidemicsound.com
Every song I have ever used in a video - bit.ly/VlogTunes

Пікірлер: 27

@davidhollin3469 4 жыл бұрын

Something valuable I learnt was that the more "ducked" your feet are the harder it is to transfer power from your feet to your edge. Less duck means more efficient edging.

@lifeofgarrick 4 жыл бұрын

Nice video. I think an important point you missed though was how the flex of your board changes as the width of your stance changes. If I ride a narrow stance I get a way more comfortable flex board at the tops and my board feels more efficient through chop. If I ride wide stance my board is way more rigid and stable, but I lose edge control easier in choppy waters - and my knees get more stress because of the stiffness that stance creates. This is the case for me atleast when I vary my stance on my Naish Monarch.

@guitaristwagner 4 жыл бұрын

Thanks for this video. I just bought kiteboarding gear that came with a slingshot edge 146. Set it up wrong 😂 and not sure if the board is to big. But hey I’m learning 😂

@JakeKelsick 4 жыл бұрын

Here are a few other tips that I forgot to mention in the video. 1. Check your screws after every session. Screws can come loose after a while causing you to lose a fin or have a strap pop off. 2. Never force tighten your screws if it's hard to screw down don't fight it, check your inserts to make sure they are clean. Fin and strap screws should always go together easily!

@adayinthelife5772 3 жыл бұрын

And take the hardware off from time to time to remove sand as can cause abrasion to the construction of the board.

@lorenzomajno9270 4 жыл бұрын

Nice - thank you! One more thing - I have on occasion removed the straps and got confused about which way to put them back on - there is a wide part and a narrow part - which side goes in/out makes a difference

@matisscukurs5535 2 ай бұрын

Just setup my first board - Naish S26 TT Hero 2022 - Naish Apex 2021 Thanks for the tips!

@JakeKelsick 2 ай бұрын

Awww snap! Let’s goooo brew. How’s the wind look this week? Hopefully you get a chance to get her wet!

@matisscukurs5535 2 ай бұрын

@@JakeKelsick no wind so far, the water is +5 Celsius here.

@Jotinhanc 4 жыл бұрын

great video

@billlawmarshall5197 4 жыл бұрын

Hey Jake nice video. Is Antigua going to be getting some good wind from tropical storm Gonzalo?

@mimcan70 3 жыл бұрын

Hi . Any video for boot/binding setup and usage tips? Thnx

@dylanmacdonald5135 3 жыл бұрын

Howsit Jake. I ride a Tona flow with boots. I make nose, tail, tail fish grabs with ease. But battle with getting grabs such as the seat belt, stale fish or mute? Is it because I’m in boots, not flexible or wrong technique? How do I get better and making the more tricky grabs?

@pr4nk5tr 4 жыл бұрын

Footstrap alignment is something that even the dude in the shop got wrong

@Triniboyjesse 4 жыл бұрын

how about what size twin tip? I know this depends on wind but what's your standard size to ride?

@JakeKelsick 4 жыл бұрын

Yeah this usually goes off of your weight and wind. I ride a 138 + 139

@Triniboyjesse 4 жыл бұрын

@@JakeKelsick cool good to know! out in they keys right now ripping on my 15m but just not a fan of my twin tip. maybe ill try the Tona joyride

@John-2Cat 3 жыл бұрын

Jake. Where are you gone?? Very quiet these last 3 weeks?

@harrycooper5632 4 жыл бұрын

🤞🏻👌

@lifesbetteronaboard 4 жыл бұрын

I never knew why kiteboards had offset inserts before

@ytdreamgamer9105 3 жыл бұрын

Boom boom boom

@StevenOTooleongoogleplus Жыл бұрын

For screws... Locktite or No?

@abacaxifamily 2 ай бұрын

I’d say no, check tightness frequently or use screws with sawtooth design (often provided with boots) or a special washer to prevent from coming loose