No video
Setup Pico Fly SD Card V18.0.1 Switch
Рет қаралды 21,681
Күн бұрынRead below if you are on a later version you're welcome!
If you'd like to support the channel then join the DMG Clan!
- Patreon - www.patreon.co...
- KZfaq Members - / @dnamobilegaming
Jump over to the Discord to get help or talk gaming - / discord
Check out my Tiks on the Tok they're basically shorts but more Tikky - / dnamobilegaming
Files shared - firebasestorag...
NOTE: If you want more info about setting up programs like GoldLeaf/SysCLK I will share these soon this is just a guide to get you started otherwise you can do some research in the meantime as there's actually a ton out there already about this and I didn't know this until recently.
UPDATE JULY 18th 2024
These sites will help you update my files shared all you need to do is extract the files from these github repos then paste the folders into my main folders to update for 18.1.0. I hope that makes sense written out.
Atmosphere - github.com/Atm...
Hekate - github.com/CTC...
BaByee!
*AFFILIATE INFO**
This video or video description could contain affiliate links and they are marked as such if so. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
*DISCLAIMER**
Any and all guides shared within DNA Mobile Gaming are guides to teach you how you could use your personal collection to play backups of your games whether it's emulation or native hardware. Game preservation is our right in a digital world and I believe we have the right to backup copies of games we've spent thousands of dollars on over the years!
*FAIR USE*
Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research.
Fair use is a use permitted by copyright statute that might otherwise be infringing.
Non-profit, educational or personal use tips the balance in favor of fair use.
@DevnMEleven Ай бұрын
Dude tysm for this! I am a complete noob at the Nintendo Switch stuff. Mine was patched so had to hard mod it and dude.. I thought this was gonna be a walk in the park... lmao. I've modded over 200+ Xbox 360s and it did not prepare me for how tiny the capacitors that needed to be soldered were on this thing. I did not have a microscope so it was pure guessing on if I had the chip connected to them or not lmao. Luckily I somehow got it first try and your videos have been an ABSOLUTE blessing! Seriously, thank you so fuckin much for your dedication man!
@DNAMobileGaming Ай бұрын
Ha no problem I had to get a scope mind you I found out my phones camera hooked up via Srcpy to my windows worked really well for one of my lites as well! I could have saved $150 on the scope in that case but way to late to return it. Glad you got yours hacked so many opportunities open up with a hacked Switch I just wish the big N would realize what they COULD do with their games.
@MegaManZer088 3 ай бұрын
I tried to do the partition setup couple of years ago when I did my switch, but the guides where badly explain, now i got a switch lite that I'll be working on soon, and this guide will be handy. Thanks. Ps: the mario kart game is asking you to update probably because has an update or a dlc that requires the new firmware version.
@DNAMobileGaming 3 ай бұрын
Oh awesome, the other partitions would be for flashing Android as well btw but I didn't care much for Android way way back when I first hacked my V1. I knew that about Mario Kart too when filming this I didn't expect it to ask me to update though so it threw me off at the time 😂.
@TTVAfluenza Ай бұрын
lites cant be hacked or modded yet
@DNAMobileGaming Ай бұрын
They sure can be hacked/modded I've now hacked 6 of them 😁
@charn00h Ай бұрын
@@TTVAfluenza I'm just finishing up my Switch Lite using this guide :)
@lum1lad775 Ай бұрын
Thanks but the more videos i watch the more confusing it becomes, I've never seen the same method twice...
@DNAMobileGaming 27 күн бұрын
Well this works and updating it even works it's really not that complicated the only hard part is installing the chip.
@shawnthorn2693 14 күн бұрын
@@lum1lad775 me 2 I went ahead and bought the oled Zelda switch with a mod chip installed and I’m still lost I can get custom themes kinda and it works great but it’s way to complicated for me
@andretti10 2 ай бұрын
Good stuff! When's part 2 coming? Subscribed 👍🏾
@DNAMobileGaming 2 ай бұрын
Hey part 2 as in what to do now sort of deal?
@andretti10 2 ай бұрын
@@DNAMobileGamingyeah exactly. Would love to see a demonstration of features as well as maybe a tutorial on how to set up Android.
@MultiGenesis666 14 күн бұрын
Followed your video all the way up to enabling emuEmmc once it finished and it was enabled my switch started to glitch and once rebooted it won't do anything now. Power buttons doesn't do anything and I checked my solder points. What could be wrong?
@DNAMobileGaming 14 күн бұрын
I will have to make a video about this because this guide is only for 18.0.1 and there's a specific way to update the folders then do this mod. You have to follow the steps here, then add the new update for 18.1.0 to the the folders after you've followed these steps. After that you will boot into the emmuc.
@MultiGenesis666 14 күн бұрын
Does this still apply if I already copied over the newly updated files that you provided in the description I started with the newly updated files not the old ones
@DNAMobileGaming 14 күн бұрын
@@MultiGenesis666 yes so how I've been doing Switches for locals is by updating the files after I do all the steps shown. Then booting if that makes sense.
@MultiGenesis666 14 күн бұрын
Yeah that kinda makes since, should I just wait for your next video? And do you think that will fix my issue? Because as of right now there is no life from my switch after enabling muemmc and then rebooting. I appreciate the quick responses, I'm new to this
@jason9139 2 ай бұрын
Thanks so much man. Exactly what I needed.
@DNAMobileGaming 2 ай бұрын
No problem 😁
@denmarin Ай бұрын
Thanks for this awesome video, well done
@DNAMobileGaming Ай бұрын
No problem 😊
@geggyboy1269 3 ай бұрын
Thanks for the tutorial man. Much appreciated.
@BobTheBuilder93839 3 ай бұрын
Only if I had a switch 😢
@thetruejay20 Ай бұрын
LMAO why you watch video then?
@JuanSanchez 3 ай бұрын
I've been waiting for this to drop.
@DNAMobileGaming 3 ай бұрын
Ha it's actually been done for over a week I just had to finalize it 😂
@OriginalSithMonkey 3 ай бұрын
Nice
@Febmaster 11 күн бұрын
Thanks for your Tutorial! Followed everything on a OLED Switch. But when starting custom firmware the first time it shows fatal error on Program ID: 010041544d5300000. Any clue how to get rid of this?
@DNAMobileGaming 11 күн бұрын
Yes you need to update everything, remember you're running the emunand off the SD card technically. I've done a few 18.1.0 Switch's and I explained what needs to be done in the pinned comments and description. Hope that helps.
@Febmaster 11 күн бұрын
@@DNAMobileGamingthanks for your answer! Really appreciate it! Do I need to update everything from scratch or is there only a new Hekate etc. necessary?
@DNAMobileGaming 11 күн бұрын
@Febmaster so what I've been doing. First I follow my own guide which is this one. Then I make sure to check that all files are on the SD card still from the files shared. Then I copied the updated Hakate/Atmosphere and booted CFW.
@Febmaster 11 күн бұрын
@@DNAMobileGamingthanks a lot! Finally it is working after updating the files with latest Hekate 6.2.1 and Atmosphere 1.7.1 and running the archive bit fixer in Hekate.
@Febmaster 10 күн бұрын
Finally I managed to get RetroArch running and tinfoil installed. For this I needed to update the SigPatches, updated fugee.bin in the bootloader folder and also added a new bootentry for Atmosphere CFW into hekate_ipl.ini containing [Atmosphere CFW] payload=bootloader/payloads/fusee.bin icon=bootloader/res/icon_payload.bmp After that I rebooted into Atmosphere via the newly added start button with fusee payload.
@Lixef_TV Ай бұрын
for some reason whenever i try transfer the backup to my PC it goes most of the way and then tells me that there's not enough space, when there is definitely enough space on my drive, like 300 gbs of space.
@officialatomo 15 сағат бұрын
Just curious. I own digital games. I can still play and access them using stock sysnand? And I won’t be banned right
@DNAMobileGaming 3 сағат бұрын
You can switch back to your original firmware yes and you won't get banned.
@ayone9250 18 күн бұрын
I get this error after trying to launch emummc can anybody help? Error while loading fss0: atmosphere/package 3 Wrong ini cfg or missing/corrupt files! Failed to launch HOS!
@DNAMobileGaming 18 күн бұрын
That is because this is for 18.0.1 not 18.1.0 you need to update everything.
@adrenalog 3 ай бұрын
Excuse my ignorance and I may be answering my own question but wanted to check with you. So several years ago I did this with my switch with CFW. I remember doing most of this to set it up. Now I was going to get a switch lite with the modchip but it looks like I’m having to do all those same steps as years ago with the SD card. Am I missing what the chip is for? Is it the actual CFW now? But you still have to install all these programs, etc. Great video btw.
@DNAMobileGaming 2 ай бұрын
The chip flashes a hack using the RasPi chip so it's permanent no jigs or anything needed. The reason you need the software setup after is because you're running your Switch off the SD card initially instead of the nand. The chip needs these files including the preload flasher because it needs to read the firmware of Hakate for example to run on the Switch.
@adrenalog 2 ай бұрын
Thanks for the info. Will I have to continually update all the stuff on the sd card like in the past even with the chip? Trying to see what the benefits are for getting the chipped switch vs the old method. I means yes I remember the jig. That was a slight pain.
@jayjayhooksch1 2 ай бұрын
Is the sd card format fat32 or exfat? Ive seen conflicting information on which to use; fat32 is preferred for stability but doesnt let you install games over 4gb or something? Im guessing that means youre using exfat since mario kart is nearly 7gb? Any advice would be appreciated, your guides have been super helpful so far. Thanks.
@DNAMobileGaming 2 ай бұрын
The SD card partition gets automatically formatted to Fat32 otherwise the system won't read it.
@javierdelgado3915 Ай бұрын
I didn't get a title keys file for some reason, up till the step where you moved your backup folder out the switch
@DNAMobileGaming Ай бұрын
You'll only get those if you had games installed
@AquaHawk-sd1dj 16 күн бұрын
Followed step by step on my Switch about 4 times, updated to 18.1.0 but I get a 2162-0002 error code; very frustrating.
@DNAMobileGaming 16 күн бұрын
This is only for 18.0.1
@AquaHawk-sd1dj 15 күн бұрын
@@DNAMobileGaming I'm aware of that but what I meant was that I followed the intructions for updating to the 18.1.0 since that is the version on my switch at the moment and have been getting error codes nonstop. I was following the instructions you gave on some of the commenters having the same issues. Thanks for the reply! Been watching your videos lately; hopefully there's a fix for this soon.
@DNAMobileGaming 15 күн бұрын
Oh okay, so what you need to do first is update the firmware files. Load them into the Switch. Follow these steps and it'll work. I've tested it with a few devices I recently hacked.
@AquaHawk-sd1dj 15 күн бұрын
@@DNAMobileGaming Lexar SD cards, FAT32, 7-zip, RP2040 chip. I have tried deleting/updating atmosphere and bootloader. During the process, I even connect to the PC to make sure the files are still in there before I boot. I have tried booting with CFW SYSAND and emuMMC and the error code pops up after showing the "Nintendo Switch" logo. It shows me all the boot options shown in Hekate as seen in the video so it's fine up to that point at least. I have watched more than 5 KZfaq tutorials and nothing. Followed every single step. I had a clean Switch, no existing files, no themes, etc. Read a bunch of forums.... no luck. I'm offering a $20 bounty if anyone can fix it lol
@AquaHawk-sd1dj 11 күн бұрын
@@DNAMobileGaming Hey man, quick little update: pretty sure my switch got bricked for some reason; don’t know if it was software or something shorted. Apparently the error code I was getting can happen with RP2040 chips. I attempted the exploit again but used the HATS pack, a different switch, and an older version of switch firmware and everything is working with this one. Thanks for trying to help me out with the other one; it’s a shame that I couldn’t fix it with anything but at least I have one that works now. Thanks for your videos!
@TheSari43 2 ай бұрын
6:20 hello i didnt have the title.keys in my folder, so i couldnt transfer it to my pc. Is that a problem?
@DNAMobileGaming 2 ай бұрын
No that just means you didn't have any titles installed
@TheSari43 2 ай бұрын
@@DNAMobileGaming thank u for the quick response. You are the goat!
@DNAMobileGaming 2 ай бұрын
No problem 😁
@same4718 Ай бұрын
Can you help me with something? I have difficulty fiding the correct answer to to where solder the wires that come from the console. RST, Clock, dat0, etc the pico fly chips have the pi out for the wires like A, B, C, D, 3.3v. what's the correct wire instalation?
@DNAMobileGaming Ай бұрын
kzfaq.info/get/bejne/fah2d6lqxsyumZc.html kzfaq.info/get/bejne/pKd4jLB6x9vVZqs.html
@TwayneReviews 2 ай бұрын
Does this work for a Switch Lite and the folder/file provided... i have installed the modchip on my switch. And i just want to overclock it. I don't kno much so tutorials is my best friend... inside the folder does it has files for overclocking? Or i need to get that separately?
@DNAMobileGaming 2 ай бұрын
Yes it works for all Switch consoles up to 18.0.1 right now.
@josecasado7511 2 ай бұрын
Did not worked on my lite… tried over 30 times BY THE NUMBERS and the EMUMMC never worked
@DNAMobileGaming 2 ай бұрын
What do you mean? Did you install the chip? Does the no SD Card show up with the chip installed? I've now done 5 Switch Lites and 2 regular Switches using this exact firmware for 18.0.1 and 18.0.0. If you need more help I have Discord as well but the video shows everything step by step. I even use my own guides sometimes to refresh my memory lol.
@josecasado7511 2 ай бұрын
@@DNAMobileGaming Yes, the chip works. The "No SD card" message shows up (if there is no SD card inserted). The Picofly is updated. Hardware parts was eeasy, software part of this mod it’s kicking my azz
@TwayneReviews 2 ай бұрын
@josecasado7511 you might have done something wrong... i ordered my picofly Today and by Saturday I'll be doing the installments... this will be my second time attempting to install mod on Switch Lite. My first attempt was difficult but i ended up doing it. And it was successful.
@tszmanmok7839 2 ай бұрын
Excuse me, it will works on which serial number’s Switch ? Or all serial numbers will working also? “I understand it’s just work on Switch , maybe will not work on Oled” And just use the SD card step by step follow the video is fine? Don’t need to open the machine to welding anything on the board ? Sorry for the long questions 🙏🏼
@DNAMobileGaming 2 ай бұрын
Yes you need the pico chip I did a video about how it's installed on the V1/V2 and Switch Lite as well.
@tszmanmok7839 2 ай бұрын
@@DNAMobileGaming Thanks for your reply, have a good day 🙏🏼
@TraverserStories16488 3 ай бұрын
Great 👍
@combatfanatic812 17 күн бұрын
Got a new SD card so doing this process over.. For some reason, I'm stuck on "checking for available free space" when trying to backup the eMMC, but works on the old and smaller SD card. Any idea why?
@DNAMobileGaming 17 күн бұрын
Do you have free space on your SD card? Did you try formatting the SD card before using it? I just did a video about 18.1.0 but it won't be released until next week and everything worked fine with my 256GB micro SD so not sure about that error.
@combatfanatic812 17 күн бұрын
@@DNAMobileGaming The new SD card is formatted, I think it may just be that it's defective since it is very very slow. The old and smaller SD card works fine. Will update when I receive a replacement
@TwayneReviews 2 ай бұрын
I think you should have a Discord community 😅😅😅 tbh
@DNAMobileGaming 2 ай бұрын
Hey I do have Discord regarding the program for overclocking I didn't share this with these because I didn't want to get into this too deep. It's easy to setup though with Sys-Clk just do some Googling though there's quite a bit surrounding this online.
@TwayneReviews 2 ай бұрын
@DNAMobileGaming okay... i will research sys-clk thank you very much... how do i join the discord? I really like your videos sub over 1 month ago
@XRazeYT 25 күн бұрын
And you you connect to internet or is emmc 100% off all time? Bc of tinf
@DNAMobileGaming 25 күн бұрын
You can connect to the internet just need to set the DNS settings to block the Nintendo Servers however you can't play online games this way but you can still update games and firmware etc. Any games I want to play online I just switch back to Stock FW it's not that hard but most games I don't really play online so it doesn't affect me.
@lcwintergaming4511 13 күн бұрын
hi did u make part 3 to this video ?
@DNAMobileGaming 13 күн бұрын
What part 3?
@i.e.2 Ай бұрын
Does the sony micro sd card works?
@DNAMobileGaming Ай бұрын
Not sure what you're asking 🤔
@Salazar769 2 ай бұрын
Hello, I have a problem. I have a 256 GB SD but when I put it in the OLED switch, it does not recognize the boot. Note that I put the latest version from your page. but if the switch recognizes it, I have it in FAT32
@DNAMobileGaming 2 ай бұрын
You don't need to format the SD card.
@Bari2000 Ай бұрын
Can i Format my SD Card to exfat because i don‘t can transfer big roms files to FAT 32
@DNAMobileGaming Ай бұрын
You don't need to transfer anything apps like Gold leaf can directly install to your SD card. Your card also doesn't get formatted to Fat32 on the partition is set this way.
@Bari2000 Ай бұрын
@@DNAMobileGaming No, you didn't understand me correctly when I prepare the SD card, do I have to format it FAT32 or does Exfat also work?
@Bari2000 Ай бұрын
Because I want to put NSP ROMs on the SD card to install them with Tinfoil, the problem is that if the SD card is FAT 32, you can't put files larger than 4 GB on the SD card. That's why I ask if I can also format my SD card to exfat when I prepare it with atmosphere
@DNAMobileGaming Ай бұрын
@Bari2000 just connect an external drive or PC and install them from there. I've done this with plenty of my game backups without having to transfer games to the card, install them, then move them back to my computer again.
@Bari2000 Ай бұрын
@@DNAMobileGaming Ok thanks, but I still have a question, does the SD card have to be FAT 32 or does exfat also work?
@paulzeev 22 күн бұрын
I wish i saw this video before createing the emmu partition. Thats all i have done is it still safe to follow these steps?
@DNAMobileGaming 22 күн бұрын
Yes these steps still work, the only thing you need to do my files is navigate to the 2 links in the description and copy the updated folders of Hakate/Atmosphere into my main folder which will overwite and update them if you're on 18.1.0. I recently did another Switch and it worked perfectly.
@paulzeev 21 күн бұрын
@@DNAMobileGaming thanks I'll try this within an hour or so . Yes my console is on 18.1.0 and the hekate V6.2.0
@paulzeev 15 күн бұрын
Just an update i got these file to work I also updated the sigpatches and everything has been smooth till today I tried installing MK 1 and it cause an issue. It still loads into stock and apparently its some files in EMMc but I'm still not familiar with the files yet all I know is that after trying to install this the emmc doesn't boot. I get the unknown pkg1 and hos version error. Any chance you know where those games go the ones that load correctly from awoo installer ?
@bojay_b 2 ай бұрын
So I actually installed the chip today (I didn't solder it correctly so I have NO clue how its working properly (I'll fix it eventually), but I've made it to the partitioning point and instead of my files being automatically backed up and restored, I have to do it manually. I'm not exactly sure what I'm looking for, so I just saved my screenshots and images, but do you think everything will still work properly if it formats the sd card with all of the mod stuffs on it? I guess I'll be the one letting you know, but any info on manually "SD UMS"ing would be fantastic. Also, thank you for these tutorials! They were amazing!!
@DNAMobileGaming 2 ай бұрын
Hey so when you partitioned the SD card this is creating a fake Nand basically to run the firmware off the SD card rather than the Switch. So your files if you had anything saved on your SD card from your non hacked switch should still be there so as long as you have a card bigger than 64 GB because the partition takes up 30GB ish. Backing everything up is done by USB C to your PC as well, so when you watch the part about backing up your name and other files you need to connect your switch to your PC to copy this over which is approx 30gb as well alongside your keys and screenshot etc. I hope that all makes sense written out, also you're welcome.
@bojay_b 2 ай бұрын
@@DNAMobileGaming actually that does make sense! but now theres a new issue.. I ended up resoldering the resistors just to see if it’d make a difference, and I still end up with the same issue. Once I try to load the cfw (emummc), the screen goes black and nothing else happens. same with cfw (sysnand), but the stock sysnand launches with no problems. any idea?
@DNAMobileGaming 2 ай бұрын
@bojay_b did you make sure to follow everything word for word?
@bojay_b 2 ай бұрын
@@DNAMobileGaming I did, and I thought I replied but I suppose not? It’s because the version of hetake that you’ve provided is out of date, all it needed was an update !
@kyledavis912 25 күн бұрын
@@bojay_bis it because you were on version 18.1.0? I’m about to get my switch modded using the chip and I’m trying to find a video/tutorial that will work. I see a lot of people say just use the updated version of atmosphere and hetake or you’ll run into problems. So do I just use the updated versions of hetake and atmosphere and put those on the root of the SD card instead of the ones on the video? Will that work.
@kaskadere1335 15 күн бұрын
I have a v2 switch with modchip installed I did all the steps, updated files everything. System boots into hekate but when I try to launch any of the CFWs or the Stock I just get a black screen. Any help is appreciated
@DNAMobileGaming 14 күн бұрын
Did you flash the Pico board?
@kaskadere1335 13 күн бұрын
Thanks for the reply. I found the issue. Basically I bridged one of the connectors that was not supposed to be bridged. After I fixed the connections everything worked fine.
@CraftHell 2 ай бұрын
If you have the v17.*.* installed and etc.. is there a way to update to 18.0.1 without losing all data?
@DNAMobileGaming 2 ай бұрын
I updated mine from 18.0.0 to 18.0.1 without losing data you just use the universal updater to update the firmware but suggested to backup your saves using GoldLeaf then store them on your PC that way you can restore them JUST IN CASE. :D
@chubbydreams6030 2 ай бұрын
Do you know when you will get the following tutorial? Btw, really liked your tutorial :)
@DNAMobileGaming 2 ай бұрын
What following tutorial exactly? Also thank you glad it helped!
@keepitshort4208 12 күн бұрын
Do you keep the game file after transferring it from your pc, because I don't want to make a copy of the game, is the software You can do the same for dlc download?
@DNAMobileGaming 12 күн бұрын
You can backup all your games and DLCs using an app on the Switch and do with them what you want in the vicinity of your own home.
@keepitshort4208 12 күн бұрын
@@DNAMobileGaming dbi mtp responder ?
@DNAMobileGaming 12 күн бұрын
Pardon?
@keepitshort4208 12 күн бұрын
@DNAMobileGaming I was asking if this is the app ?
@DNAMobileGaming 11 күн бұрын
I still don't know what you mean though, app for what?
@diesel2o07 20 күн бұрын
I have a problem booting hekate it boots up then everything freeze and power goes to 0% then everything else temp to
@DNAMobileGaming 20 күн бұрын
Not sure what that would be, maybe you soldered something wrong. Double check that you soldered your capacitors correctly and there isn't any bridging.
@diesel2o07 18 күн бұрын
OK thanks
@wingate23 Ай бұрын
Went yo launch cfw (EMUMMC for first time. And says unknown pks1 version. Can u help please
@DNAMobileGaming Ай бұрын
What version is your Switch?
@wingate23 Ай бұрын
V2
@DNAMobileGaming Ай бұрын
Firmware version
@wingate23 Ай бұрын
@DNAMobileGaming 18.1.0 that's what it says on the original switch system software
@DNAMobileGaming Ай бұрын
@wingate23 well this guide is for 18.0.1 not 18.1.0
@nightfire2015 Ай бұрын
Ive got to the part where you get the prod and lockpick rcm. But i am missing the title keys file?
@DNAMobileGaming Ай бұрын
You don't need the title keys 😔 that's only if you had games installed
@nightfire2015 Ай бұрын
@@DNAMobileGaming thanks for the reply, I got the title key files now, but now, I have -"A fatal error occurred whin running atmosphere - Program ID : 010041544d530000 - error Desc : std:: abort() called (0xffe)" I looked up what to do, it said to deleted named as the program ID in the contents folder but I don't have any thing with that ID. I'm on a switch lite, I think my OFW is 18.1.0
@nightfire2015 Ай бұрын
I did the whole process again and the same error comes up
@DNAMobileGaming Ай бұрын
@@nightfire2015 well this is for 18.0.1 you just need to update the files from github to support 18.1.0
@fe0xion Ай бұрын
why is it so hard to find certain game roms and even adding them to the switch is hard lol any tips?
@DNAMobileGaming Ай бұрын
Not sure what you mean? I have a video about dumping your games if that's what you're looking for?
@Moonpoints 2 ай бұрын
can I use the stock firmware to play my physically owned games online still or will I get banned for that?
@DNAMobileGaming 2 ай бұрын
Yes to can switch back to stock everything is loaded on the SD Cards partition basically so if you take the SD card out your Switch will act normal when switching back to the SFW
@Moour3331 2 ай бұрын
Just modded mine for the first time, maybe it was a typo but does all of this work for 18.0.1 now ?
@Moour3331 2 ай бұрын
Oops I missed the pop up you put on the screen. Thanks !
@DNAMobileGaming 2 ай бұрын
Ha yup it does still work.
@wolvrG 2 ай бұрын
I have Switch Lite with 18.1.0. Will adding modchip to it allow me to load up hetake? I have ordered one from AliExpress and its suppose to get delivered in few weeks
@DNAMobileGaming 2 ай бұрын
Just use the files I shared for setting it up, then follow this to update the files for 18.1.0. I only have the 18.0.1 as of right now but it's easily able to be updated if you follow how on the GitHub repository. github.com/CTCaer/hekate/releases/
@wolvrG Ай бұрын
@@DNAMobileGaming Cool. Also, I have 64GB card so I have seen in some videos that they make partition of only 12GB. Is it safe? or full 29GB Partition is required? I only play few games at a time so 2-3 games is fine for me
@javierdelgado3915 Ай бұрын
getting fatal error but then i realized I was on 18.1.0. Any work around you might know of??
@DNAMobileGaming Ай бұрын
Download my files, navigate to GitHub and update Atmosphere. I linked this for someone else as well.
@kyledavis912 25 күн бұрын
@@javierdelgado3915 did you ever find a method for 18.1.0
@jayjayhooksch1 2 ай бұрын
Is there a way to open the homebrew menu without having to insert a gamecart? My mobo on my switch lite doesnt read game carts but hoping i can still salvage the switch by modding it.
@DNAMobileGaming 2 ай бұрын
Just open the album then click Tinfoil it will install onto your Switch. That way you can install your games directly.
@jayjayhooksch1 2 ай бұрын
@@DNAMobileGaming thanks! I was able to follow your guide and get everything installed. However, my date and time is wrong and won't let me use some of my apps. Any advice?
@DNAMobileGaming 2 ай бұрын
@@jayjayhooksch1 hey just go to your settings you need to manually set this it won't automatically detect on CFW from my experience.
@user-bu2so5no7t Ай бұрын
Nothing is showing on my payload help 😢😢
@DNAMobileGaming Ай бұрын
Of course not you don't need anything in your payload.
@i.e.2 Ай бұрын
in the beginning you said that you need a micro sd card so does the micro sd card works or not? 0:40
@DNAMobileGaming Ай бұрын
You can try the Sony brand I've never owned a Sony Micro SD card but if it's a good card that is SDHC A1V30 or better than sure why not. Just don't cheap out on the card you use.
@i.e.2 Ай бұрын
@@DNAMobileGamingthat’s what I did actually
@i.e.2 Ай бұрын
@@DNAMobileGamingI bought a micro sd card by sony it’s 1TB V60 A2 3U
@eyeyamjstn628 Ай бұрын
Can I use a Mac for the pc portions?
@DNAMobileGaming Ай бұрын
Not sure I don't own such a thing.
@Powerboll 2 ай бұрын
does it also works on an system whit 18.1.0 whit an modchip? (u helped me a lot installing the modchip)
@DNAMobileGaming 2 ай бұрын
Yes there is an updated version for 18.1.0, also no problemo glad to help it actually gets easier the more you do them 😜
@Powerboll 2 ай бұрын
@@DNAMobileGaming do I have to download any new files or are they all good that u linked in the video description
@DNAMobileGaming 2 ай бұрын
@Powerboll if you're only 18.1.0, download my files then navigate to site below and follow what it says. You just need to copy the files to the folders they say on GitHub to update it
@DNAMobileGaming 2 ай бұрын
@Powerboll github.com/Atmosphere-NX/Atmosphere/releases/tag/1.7.1
@Powerboll 2 ай бұрын
@@DNAMobileGaming thank you so much 😁👍
@chamith256 Ай бұрын
is this same for switch lite?
@DNAMobileGaming Ай бұрын
Well yes as the Switch Lite is part of the thumbnail 😝
@AltoBo123 2 ай бұрын
Cant install Tinfoil for some reason...
@DNAMobileGaming 2 ай бұрын
Did you navigate to photos icon and click the Tinfoil installer?
@DNAMobileGaming 27 күн бұрын
@@schmutzhaufen5348 you need to update to the latest firmware.
@islemsissou7707 10 күн бұрын
Followed every step but when i go to the launch they said "No main boot entries found Check that bootloader/hekate_ipl.ini has boot entries or use More configs button for more boot entries" Any idea how to fix this ? Edit: wait i fixed it now
@DNAMobileGaming 9 күн бұрын
I've explained how to fix this already but haven't released a video because by that point version 19 will come out for the Switch.
@JoshSmith-os2sg 7 күн бұрын
How did you fix this? I lost all my files, added them back and still have this issue. This is the 3rd time I have tried to do this install. :(
@TheZooz1234 2 ай бұрын
Can any switch lite run this hack or only certain models
@DNAMobileGaming 2 ай бұрын
No this is for any Switch that's why I just put Switch in the title.
@TheZooz1234 2 ай бұрын
@@DNAMobileGaming so I haven’t got the understand much on this hack, with certain applications will you be able to download games for free or just dump games you already bought .
@jonnyking5124 Ай бұрын
does it works with V18.1.0 ?
@DNAMobileGaming Ай бұрын
I answered this already
@kyledavis912 25 күн бұрын
@@DNAMobileGamingyou actually said it works for V18.0.1 so does it work for both or only 18.0.1? Or is that the same thing
@DNAMobileGaming 25 күн бұрын
@kyledavis912 v18.1.0 is the latest version of the Switch. All you need to do if you're doing this with 18.1.0 NOT 18.0.1 (which is shown here) is use my base files shared then copy the latest version of Hakate/Atmosphere overwriting the old files in the corresponding folders.
@kyledavis912 24 күн бұрын
@@DNAMobileGaming thank you dude. The first person to actually give me a straight forward answer.
@jacquesmazieres5081 26 күн бұрын
Merci
@DNAMobileGaming 26 күн бұрын
Bienvenue 😁
@thetruejay20 Ай бұрын
Tinfoil 😏
@DNAMobileGaming Ай бұрын
What about Tinfoil?
@hermanputra9398 25 күн бұрын
Do everything and got A fatal error occured when running Atmosphere. Program ID: 010041544d530000 Error Desc: std::abort() called (0xffe)
@hermanputra9398 25 күн бұрын
I don't know if I'm wrong or not... I tried downloading latest atmosphere version and paste all the folder inside my switch sd and it worked.. I guess the atmosphere version is not compatible with the 18.1.0? But now Tinfoil "can't start software"
@DNAMobileGaming 25 күн бұрын
This is for 18.0.1 not 18.1.0, but yes all you had to do is copy all the updated versions of Hakate/Atmosphere overtop of my files shared. Then follow the steps, you also need to get the latest version of Tinfoil, it's super buggy though with 18.1.0 I find.
@jonathanklouski 3 ай бұрын
@Powerboll Ай бұрын
Hi its me again i have changed some files to the newer ones just like u Said but when i first time going to cfw it Said this error A fatal error occurred when ruming Atmosphere. Program ID: 010041544₫530000 Error Desc: std: :abort() called (Oxffe) Report saved to /atmosphere/fatal_errors/report_0000000006309e96.binThe atmosphere directory may improperly have archive bits set. Please try ruming an archive bit fixer tool (for example, the one in Hekate). Press POWER to reboot.
@Powerboll Ай бұрын
Hakate Works
@DNAMobileGaming Ай бұрын
Are you on 18.0.0 or 18.0.1? If you're on another firmware you need to update it.
@Powerboll Ай бұрын
@@DNAMobileGaming i am on 18.1.0
@DNAMobileGaming Ай бұрын
@@Powerboll did you copy the files in the link then navigated to Atmosphere on Github to update the files?
@Powerboll Ай бұрын
@@DNAMobileGaming yes so i downlowded the files and put them in the sd card switched them ehit the old ones
@steviesseams6567 2 ай бұрын
I like quick and easy