You are Welcome! -Nathan R

Hi, I'm not sure what Alex said, but These ATEM switchers only have the single encoder so whatever settings you choose, those same quality settings apply for Streaming and the SSD recording. That means users can't record in the best quality possible to the SSD, and then stream in a lower quality because of bandwidth issues. -Nathan

@@josehernandez5396 You would need to leave a computer on, that is connected to the ATEM on the Local Network. Then Remote Desktop to that computer when you want to control the ATEM. -Nathan R

What cameras are you using?, What Switcher are you using?, How is your Key Lighting on the stage? Email me if you'd like. -Nathan R

Hi, So you are sending the ATEM Program feed to the computer via USB-C for streaming with Re-Stream. Then you have an input to the ATEM Mini Pro from a computer, and I'm not really sure what the issue is. Can you share more? :) Thanks! -Nathan R

@@CrazyAmazingDesigns ATEM hooked up to MAC via USBC, 2 cameras, mic, MONITOR full plug in screen, 2nd windows PC for in-house videos, does the projector go to the ONLY "OUTPUT" HDMI CONNECTION? Where do I plugin the 2nd PC Windows ? Where do I plugin the MONITOR showing all the full screen Preview, Program, Cam 1, etc pages ? Need to know where to plug everything in. we lost the INHOUSE video when we switched to RESTREAM & quit using the QUICKTIME in the MAC for inhouse video... what are the MAC connections when using ATEM Blackmagic PRO? and where should all the other connections go when using a PROJECTOR & not TV for OUTPUT inhouse

Hello, I'd love to dive into this with you but this sounds like a larger conversation than we can practically have inside this KZfaq Comments Section. If you are able to book a Zoom Training with me, I can get all of your questions answered. With a couple of sessions we could probably even get things working how you'd like. Crazyamazingdesigns.com/training -Nathan R

@@CrazyAmazingDesigns i will get back with u heading to church now, to review all plugins again

Hi, It should just be a matter of getting cables from the different devices that convert to HDMI-A. That should be a straight forward proccess on Amazon. Yes the ATEm switcher should work fine, these have scalers built into each input that allow for different reolution cameras to be connected. -Nathan

Hi, If you'd like to show cameras on the screens I'd suggest using a Hardware Video switcher such as the ATEM Mini Extreme, or the ATEM Constellation switcher. Bring in the graphics and cameras to the switcher, Then send the ATEM output to the screens. Basically, build the Live Stream Locally, then use that on the screens. Don't try to create a separate feed. If you used the constellation switcher, you could bring in ProPresenter, + cameras, then send output 1 to the side screens, and output 2 to the center screen. Now you can use a StreamDeck to switch between showing cameras, and ProPresenter on each screen being fed from the switcher. -Nathan R

Hi! You can use your Chameye Controller to control the motion of your PTZ cameras. But you will have to run HDMI cables from the cameras to the ATEM switcher to input signal. Note: if you are going more than 10ft, you will need to convert the HDMI signal to SDI and then back to HDMI to connect to the ATEM switcher. -Nathan R

Only if the cameras have HDMI Video Out. The ATEM can't switch between digital sources. It sounds like you could use OBS and a StreamDeck controller to do what you want. -Nathan R