You are doing a wonderful job helping people like me to understand and make it possible for churches to do better work for HIS people. THANKS a lot for all your videos!!! GOD bless you more!!
@iancpcspokane5204 жыл бұрын
AJay- you're a godsend man. We need more AJay's in the world today!
@AJaytheCEO4 жыл бұрын
Thank you
@mountgalilee50683 жыл бұрын
Very helpful information. Please add Easyworship setup? Just brought the ATEM mini pro. Thanks
@jasonhernandez20053 жыл бұрын
Hahaha, that is exactly the set-up i’m going to be using lol. I don’t think it’ll be too hard haha
@jtsweeney794 жыл бұрын
Suggestion, you really shouldn't take XLR balanced to unbslanced. out of the Ultramatch with a Stereo XLR Females to male jack to the line in of the ATEM. The Ultramatch is a balanced out and the ATEM is unbalanced in. You have the wrong impedance. You need to use a Di box in the middle. The XLRs coming out of the Ultramatch into the Balanced +4 dbu of the Di box. The Di box Line Level -10 dbV into the line level - 15 dbV input of the ATEM. Do not use an XLR stereo females to jack adapter out of the Di box. Remember your taking professional high impedance equipment and connecting it to a consumer low impedance device. You need to have the two inverse phase and ground pushed into a single phase dual channel. This is the purpose of a Di Box using either active circuitry or passive transformers. The Ultramatch is an Active source, so the Di Box needs to be a Passive Di Box If you have a Passive Source output, than the Di Box needs to be Active. The ART Cleanbox Pro is an example of an Active Di Box. For your situation it may be difficult to find a Passive Box with the inputs you need. In this scenario you may be forced to get the ART Cleanbox Pro. It's better than just having the cable setup you currently have to the ATEM. You will also notice a discernable difference in audio quality while monitoring the ATEMs audio. Currently you have the inverse phase of the balanced signal being predominantly pushed to the left channel of the line level input of the ATEM. This leaves the sound dull, empty and at a lower signal decibal. With the Cleanbox converting down to unbalanced HiFi Line Level, you'll hear the sound filling both channels equally, fully and at full volume. I know you may not be having any issues and may think that it's not worth it. However, Electromagnetic interference inside and outside your church will always fluctuate. You don't want to take a chance a loud or low hum will occur spontaneously during service. Besides, the Cleanbox is cheap. About $80.
@AJaytheCEO4 жыл бұрын
Thanks for that. That makes a lot of sense. I will look to add something like this at my church next week hopefully.
@hezekiahmorales30304 жыл бұрын
Any link to your suggestion? I see so many of these and don't yet understand the difference. Thank you!
@AJaytheCEO4 жыл бұрын
I moved to an xlr to stereo cable
@hezekiahmorales30304 жыл бұрын
@@AJaytheCEO So now you are using a Dual XLR to 3.5mm Stereo?
@AJaytheCEO4 жыл бұрын
Yes i am
@shepherdsloveworldwide6332 Жыл бұрын
23:00 Now you’re just showing off😂😂. Thank you very much for an educative video
@AJaytheCEO Жыл бұрын
Not at all. I originally was one of the musicians and choir directors there
@yesid.212 жыл бұрын
I love the way you explain every single detail. You do it with passion, patience and very clearly. Thank you for your videos.
@AJaytheCEO2 жыл бұрын
Thank you very much!
@jackwolf27584 жыл бұрын
Thanks for this video. You have been extremely helpful and have an amazing passion to share God's word through technology. Thanks again for the video, our Atem mini Pro will be arriving soon so can't wait to set it up!
@AJaytheCEO4 жыл бұрын
Glad it was helpful!
@CreativeUnderground3 жыл бұрын
Is there no end to your talents? Beautiful piano work Ajay!!!
@pastorjaredm3 жыл бұрын
This was so helpful. I've been struggling to really utilize our ATEM and even having some issues with basic functions. I'm so glad I found your tutorial as I now have a much better understanding of both the hardware and software.
@AJaytheCEO3 жыл бұрын
Glad it was helpful!
@simonsaucy4 жыл бұрын
a tip for proclaim! if you go to setting> Display and choose the foreground only. it will display the text only on a black background. alternatively, you can make your own custom confidence monitor display that say only shows 2 lines of text and instead of displaying that as a confidence display it as working as your lower 4/3 lyrics! hope that help if you need more info i am happy to help!
@AJaytheCEO4 жыл бұрын
Thanks for that
@simonsaucy4 жыл бұрын
@@AJaytheCEO no problem!
@larryshotwell11223 жыл бұрын
I have similar setup. You do not need the usb cord, you can connect the computer to the switcher by IP address. That frees up the USB port to plug a storage device so you can use the record function.
@AJaytheCEO3 жыл бұрын
I normally hook it up initially to make hardware changes that can't be done via ethernet
@larryshotwell11223 жыл бұрын
@@AJaytheCEO I was unaware that there was any setup you could do from usb that you could not do from ethernet. You just have to select the I intial connection differently. I ended up.using the usb and obs initially because the hardware encoder and Facebook did not play well together. Live was ok but after processing the sound was out of sync. Windows updates messed me up last Sunday's service so I tried the hardware encoder again and Facebook must have fixed it now it is ok. I also decided I wanted the usb to save the service to disk so if the streaming gets interrupted I can upload the service afterwards. I love your videos, Very informative and well presented. Thank you.
@marcushawkinsmusic4 жыл бұрын
The lords work!!
@MKMTTG Жыл бұрын
So helpful! Thank you so much! jay i love the thing you do for the lord god bless you
@AJaytheCEO Жыл бұрын
Glad it was helpful
@jamesschnepp71532 жыл бұрын
This was a blessing and a major help with implementing needed change. Thank you
@AJaytheCEO2 жыл бұрын
Thanks. Glad it was of help
@stevedeaton11844 жыл бұрын
Dude this was the video that I was looking for. Thanks so much!
@AJaytheCEO4 жыл бұрын
Glad I could help!
@aleksandrovkiev4 жыл бұрын
It would be very useful if you drew connections on a white board
@Ty1on3twelve3 жыл бұрын
Agree.
@danieladarkwa274 жыл бұрын
I am in shock that this guy can play the piano. I have been a subscribe for while and now know that he can play the piano. Mind blown
@AJaytheCEO4 жыл бұрын
LOL thanks. I've been a minister of music for almost 25 years. Media has just been something I've been doing for the last 9 years
@danieladarkwa274 жыл бұрын
@@AJaytheCEO That is amazing
@JudahKibalama3 жыл бұрын
@AJaytheCEO so dropping a track soon..?😜
@brucekubwayo74614 ай бұрын
thank you so much AJ
@AJaytheCEO4 ай бұрын
You are very welcome
@redpurple1035 Жыл бұрын
HDMI Port 1 is specifically made for GAMING device for lowest latency and only has YUV Colors. 🙂
@dluckjc112 жыл бұрын
So helpful! Thank you so much!
@AJaytheCEO2 жыл бұрын
Glad it was helpful!
@jacquelynnacopoulos1278 Жыл бұрын
Hello, Congratulations. Cool 👍
@AJaytheCEO Жыл бұрын
Thank you! Cheers!
@topkickproductions18714 жыл бұрын
Good Job AJ. Thanks for the tips for DSK Powerpoint.
@AJaytheCEO4 жыл бұрын
You are welcome
@texanruss4 жыл бұрын
Great job, thanks for the time and effort in this. Helpful!
@adventflamemedia28643 жыл бұрын
You are a man of many talents (pianist)! Great job! Thanks for the video. I am helping out a church with their install of their ATEM Mini Pro. This was so helpful! Keep it up bro!
@AJaytheCEO3 жыл бұрын
Thank you. Glad to be of help
@rishikatiyar4752 жыл бұрын
It really is
@activthlete61573 жыл бұрын
brilliant job! thx
@AJaytheCEO3 жыл бұрын
Glad you liked it!
@obulorolisa4 жыл бұрын
God bless you
@Tore_Lund3 жыл бұрын
Routing the audio directly to the ATEM mini, it doesn't have the lag of the HDMI feeds, so it is slightly early (you're a musician so you must have noticed?). We have routed it through one of our cameras which has XLR input, and then use the audio from that HDMI stream as main audio, or can you insert a delay in the audio processor or mixer? We only have an analog out mixer with reverb, so we had to do it the simple way.
@motownk3 жыл бұрын
This probably isn't the place, but here goes. Do you keep your ATEM Mini plugged in all the time? I had 2 units now that on initial setup work as expected. After leaving everything connected overnight the computer no longer recognizes the ATEM as a webcam via the usb-c out port. I tried connecting it to 3 different PCs and none of them recognized it. The first unit went back to Black Magic support and they were unable to fix it and sent a new one. They are now sending me a third unit. I want to do what I can to keep it functional. It seems like if it was a power surge that more than the usb-c out port would be affected. Any thoughts?
@AJaytheCEO3 жыл бұрын
My atem is plugged into a smart switch which kills the power when not in use. So it acts like a power switch. I have not had any issues with it. I've done this same thing even with their bigger switchers since they have no power switch
@motownk3 жыл бұрын
@@AJaytheCEO Thanks for the reply. I so want this switcher to work as it will make the Zoom experience for our congregation much better. I am completely baffled as to what is happening and that it happened to two units.
@AJaytheCEO3 жыл бұрын
@@motownk Sounds like a surge from the computer's USB or power going to the ATEM. You have everything connected to surge protectors right? If not, they should be.
@motownk3 жыл бұрын
@@AJaytheCEO yes two laptops, an hdmi splitter, a video camera, the ATEM mini pro and an external monitor are all plugged into a surge strip.
@ThisisDeLife Жыл бұрын
Hi AJ, can you please do a more comprehensive setup instruction. I feel like you are assuming that I know some of the connections etc. And there is way too much movement compared to how you normally do your videos. Is there away the you can actually show the connections, software, how to set it up etc. Right now it's like you are assuming that I know. Thank you and i look forward to seeing the redo.
@AJaytheCEO Жыл бұрын
I would invite you to visit this series of videos as this one does do some assuming kzfaq.info/sun/PLfNVqWlknkogGVVQ14_5SVrwrvjiyxJA5
@jazzeejax58164 жыл бұрын
This was great, thanks!
@mrphillipwest4 жыл бұрын
Well done! Thank you!!!
@rayclickmediaproduction1000 Жыл бұрын
I have a ptz vikery camera that carry a usb connection how can i connect this same camera to the Atem mjni pro
@AJaytheCEO Жыл бұрын
You can't if it doesn't have HDMI or SDI connection
@genepate66913 жыл бұрын
Great Demo!!!
@AJaytheCEO3 жыл бұрын
Thanks
@trennikat3 жыл бұрын
I want to ensure I understand correctly. Could I purchase this instead of buying an individual capture card?
@AJaytheCEO3 жыл бұрын
Yes that is correct as this will show up as a capture device to your computer
@KehOlaleye3 жыл бұрын
What's the name of the portable monitor please
@JesusImageWorshipMoments3 жыл бұрын
Can I use usb type C to output feed to various TV's around the church ?
@ball4GOD2 жыл бұрын
I live stream for my church using OBS. I use a separate monitor with a PowerPoint for scripture verses and OBS captures that screen as a source. Can I show or capture these verses in the same way with the Atem mini pro??
@AJaytheCEO2 жыл бұрын
Technically you would just send your second screen to the ATEM instead of a physical monitor and then it would work by you selecting that input on the ATEM instead of screen capture.
@RobertoRaymon2 жыл бұрын
You mentioned DSLR cameras, but DSLR cameras show the boxes and icons within your recorded stream.
@AJaytheCEO2 жыл бұрын
You need to have a DSLR that offers clean HDMI output
@mccainsconcealcarry Жыл бұрын
I am getting ready to order an ATEM mini pro for our church. Was wondering if you have an affiliate link for one. Since we going to buy it anyway why not help you out. Thanks.
@AJaytheCEO Жыл бұрын
Here you are and thank you amzn.to/3xup8pa
@CalvaryBattleCreek4 жыл бұрын
Please make an EQ and Dynamics video next.
@AJaytheCEO4 жыл бұрын
I'll work on that
@ChurchontheHillva4 жыл бұрын
Looking for that video you were going to tag about setting up the vimeo stream
@AJaytheCEO4 жыл бұрын
Haven't made it yet
@TheAidanVogt4 жыл бұрын
Can you do the control over network
@simonsaucy4 жыл бұрын
yes just plug it into ethernet. make sure that the ip address is different from your computer tho or it will not work
@AJaytheCEO4 жыл бұрын
Yes you can. I was controlling it that way in this video.
@mbungufamilytv4846Күн бұрын
The USB-C was connected to the live stream computer? Was it usb-c to usb-c?
@AJaytheCEOКүн бұрын
That depends on the computer if it has a USB c connection. I have used both
@tyrochristianchurch4 жыл бұрын
Thank you! - Question: When you connect to the USB-c port to record (via SSD or SD card), how then do you connect to the computer for what BMD calls "webcam out, software control, software updates and panel connection"? Does the hub allow you to both/simultaneously record (SSD or SD) AND connect via the USB3 port to the computer to connect with the Control Panel, etc?
@AJaytheCEO4 жыл бұрын
No you can't do both
@skyvision14274 жыл бұрын
Hi Ajay, thanks for your video how do I get a live picture on big screen? As live
@ailo144 жыл бұрын
Thanks so much Ajay. I am having problem with the monitor too. It is not clear how you solved the same problem here. What did you change the frame rate to? I finished setting up my brand new ATEM MINI PRO ISO last night for service today. Except today I get to church and while setting up I think I may have changed a setting on the ATEM SOFTWARE CONTROL (1080p24fps) All of a sudden my monitor stops working and I am unable to use the switcher for service today cause I can’t see any of the inputs/preview/programme on the monitor. I have tried all the different video settings but the Monitor is still saying “NO SIGNAL”. But it was working fine last night. I have tried everything (restart ATEM MINI PRO, COMPUTER, RESTORE ATEM MINI PRO ISO through SOFTWARE CENTER by going to FILE -> RESTORE). Please advise what to do! Obviously a bit down I couldn’t use my ATEM MINI PRO ISO for the first time today.
@AJaytheCEO4 жыл бұрын
What monitor are you using again with your atem?
@adanhernandez48052 жыл бұрын
Can you do an updated video on this, where you go over setting up an output out of propresenter for full screen lyrics and scriptures using 2 line slides in the congregation and have the same slides display at the bottom of the screen on top of the video on the streaming feed in the atem mini Pro
@AJaytheCEO2 жыл бұрын
I have a similar video explaining this setup but you would not be able to do both just with the atem mini pro. You would need something like OBS, vmix or some other additional switcher software to manipulate this type of workflow
@dfandrews2 жыл бұрын
Hey AJ, I have a church setup that is driving me nuts. Not sure if I have a defect in my Atem or it's working as designed. I have two mixers; one for the loft/choir mics and one for the house mics. What I want to do is connect one mixer output (choir) to the mic 2 input on the Atem and the house mic mixer outpout to Mic 1 input on the Atem. What I'm finding is I can't mix the mic inputs. I can hear mic 1 but not mic 2. I know that both inputs are working bc I can move the input from mic 1 to 2 and the audio follows just fine. And it's not a cable issue, I've substituted and still have the problem. HELP?
@AJaytheCEO2 жыл бұрын
Please email me questions@ajayholmes.com
@juanreyes30534 жыл бұрын
Using ATEM mini will eliminate the need of a mini recorder? Sorry for my ignorance! I’m still learning here. TIA!
@AJaytheCEO4 жыл бұрын
I possible could but it all depends on your setup
@specs773 жыл бұрын
How do you use ATEM mini pro to output to your screens?
@AJaytheCEO3 жыл бұрын
If I want to keep the multiview output, I use a simple computer connected to the displays running obs and connect the computer to the atem via usb
@specs773 жыл бұрын
@@AJaytheCEO Is obs video machines, I was screens? I have TVs and I don't think a computer would work.
@AJaytheCEO3 жыл бұрын
@@specs77 TV screens will work. You just need to have a computer with a second display output and then convert it to the type of cable your displays use
@richardharvey7483 Жыл бұрын
Can I ask a question please We have just had a brand new stem mini pro system installed It refused to accept channels 3 and 4 and if we add a hdmi from the computer it cuts the feed to the screens Any ideas God Bless N
@GabeNicose4 жыл бұрын
For the DSK, would we need to run another presentation software with a black background if our current presentations uses a video background for the congregation? Or is there a way to use the DSK to allow one presentation with video background to be used for both the congregation as well as livestream? Currently we're doing picture-in-picture mode because our presentations have video backgrounds and we're unsure as to how to use the DSK so the text only shows on stream.
@AJaytheCEO4 жыл бұрын
What presentation software are you using? Propresenter 7 allows you to run 2 separate outputs with different formatting that would work
@GabeNicose4 жыл бұрын
@@AJaytheCEO Currently Easy Worship.
@larryakrong9073 жыл бұрын
Very helpful...unfortunately, the HDMI out on the Atem doesn’t work with my current monitor... Any ideas ??
@AJaytheCEO3 жыл бұрын
It is most likely the frame rate. Change that in your ATEM software to see what is supported
@larryakrong9073 жыл бұрын
@@AJaytheCEO Thank you sooooo much, it worked
@MrDueno3 жыл бұрын
Hi. How we can disabled/kill/remove that background sound (noise) when you played the piano there’s a sound like a ground something like that, I have that issue on my church. Thanks.
@AJaytheCEO3 жыл бұрын
That sounds like a grounding issue. What type of cables are you using?
@larryshotwell11223 жыл бұрын
Use a passive di box with the ground lift switch set to lift
@wingsoffreedomking8709 Жыл бұрын
i can t take sound from a mixer where i put the cable on phone? should i search for something like rec out or is working with phone to? i need to install atem mini software and change to line and can i use the phone out from mixer?
@waichow36583 жыл бұрын
Thanks. It solved one issue, ATEM Mini Pro is more powerful than the ATEM mini. Well, our church issue is that we don't have an Ethernet yet. As it has been neglected sometime ago and because of the lock down. I am thinking of using an i5 computer with an extra monitor, buy an ATEM Mini Pro and a Mevo camera using Zoom as our live streaming platform. We are hesitant for further investment, as if we don't have a working Ethernet connection, we need to use a WIFI hotspot. So if that's the case, we might perhaps use a mobile phone for Zoom Connection and share the video to make the mobile phone a cohost. This will be changed if we can properly invest an i7 computer. Our church desktop for PowerPoint Presentation may be antique. So, we need to consider that. Do you think using an ATEM Mini Pro with an i5 lap top (or i7 desk top) with ethernet will work with Zoom. I have an i7 desktop, but bringing it to church every Sunday will be very funny and exhausted. Thank you and looking forward to hear from you soon.
@botrvideo75992 жыл бұрын
can you turn on dsk on the atem? or only on software?
@AJaytheCEO2 жыл бұрын
Not on the atem mini pro. It is only available directly on the mini extreme
@drewprice58073 жыл бұрын
Any advice on removing the "white noise" during the portion where you were playing the piano?
@AJaytheCEO3 жыл бұрын
That was because of the computer audio being unmuted. We always get that because of the rca cable going into the sound system
@robsmith12394 жыл бұрын
Atem Mini , Can you have the HDMI out set to record and split that signal into a monitor and a pc or recording device, will it do both from that port ?? Thanks
@AJaytheCEO4 жыл бұрын
Sadly no it cannot.... natively. I have a work around for that. Video coming soon
@richardthomas307910 ай бұрын
How would I set up if I wanted to use Zoom and a network connected ATEM MINI Pro and an Iphone as the Camera feed?
@AJaytheCEO10 ай бұрын
Zoom would see the USB connected ATEM as the video and audio but there isn't a way to connect a network cameras to the ATEM they all need to be physically connected in some way
@calvarychapelleander36052 жыл бұрын
Question: I have an Atem Mini Pro. I am having an issue where I can't seem to get rid of whats on my camera's LCD screen when it goes through the ATem. Is there a setting I'm missing to get rid of what's on my Sony's LCD screen in the ATEM? I try to do it on my Sony Camera but I can't get rid of everything STB will always remain or battery. Now a capture card works to completely get rid of everything but I was hoping not to have get 3 or 4 capture cards to work the Atem. Is there a setting I'm missing on the Atem that will fix this? Thanks in Advance!
@AJaytheCEO2 жыл бұрын
This will be done all in your cameras. What type of Sony are you using? Sounds like a clean HDMI output setting needs to be turned on
@calvarychapelleander36052 жыл бұрын
@@AJaytheCEO Thank you! It's a Sony FDR AX 100. Yeah the capture card takes care of it but the Atem doesn't. Clean HDMI output is a new term to me. I will check into it. Thank you!
@BBrown6184 ай бұрын
Got the latest update and I can't get any sound to broadcast over live stream. What are some things to help troubleshooting the problem. I'm using a presonus 16.0.2 USB Board. Thx.
@AJaytheCEO4 ай бұрын
Confirm audio is routed to the output used to connect the cable to the ATEM. If you hear audio then confirm the ATEM is set to line and is on
@jamesdrakefilms3 жыл бұрын
how do you get around not having multiview for any cameras, just having the ability to output the main video from the HDMI?
@mrmooor4534 жыл бұрын
Haw can send program to live show on projecter screen
@tpese Жыл бұрын
how do you connect your to an indoor display while having all those connected to the atem mini pro.
@AJaytheCEO Жыл бұрын
You would just connect it to the HDMI out or the USB out to a computer and then have the computer out go to your display. If you use the HDMI out, you lose the ability to have the multiview though
@abdazizanwar2 жыл бұрын
Great video! Can we livestream KZfaq & Facebook at the same time from ATEM mini pro?
@AJaytheCEO2 жыл бұрын
With restream or with a computer using the USB output
@elvins6945 ай бұрын
Blessings. Is there a way you can setup Atem mini pro automatización? instead of hitting the on button for the sound to come on the live all the time. Just set it up so that it will start recording with sound automatically
@elvins6945 ай бұрын
Please. I would appreciate it
@AJaytheCEO5 ай бұрын
You can't reprogram those buttons but you can make a macro to do that
@marshallbangun3 жыл бұрын
I also use ATEM Mini in my church. There’s a problem tho. Like you, I don’t use Blackmagic cameras to the ATEM Mini and the ATEM software won’t let you do color correction if your cameras aren’t Blackmagic. Without color correction my cameras look bad. I’ve tried using the OBS’ color correction, but the problem is OBS’ color correction read cameras that went through the ATEM as one input, so I can’t put different color correction for each camera. Do you have any suggestion for this issue? Thanks in advance
@AJaytheCEO3 жыл бұрын
Not exactly sure about a work around for this
@marshallbangun3 жыл бұрын
@@AJaytheCEO thank you for your response :)
@user-ii4gw3hr3l18 күн бұрын
Hi Ajay So I have a question about the Atem mini pro .so recently we bought an Atem mini pro and a blackmagic studio camera 4k pro so I tried to stream in OBS using Mac mini m2 but when I opened the OBS it turned that the image have dropped all the quality the image was bad so I tried to decrease the quality from (4k to 1080)on the blackmagic studio camera but it didn’t help So I would like your help thank you
@AJaytheCEO17 күн бұрын
Your computer is not fast enough for 4K nor can the atem mini pro accept 4k. Set the camera to 1080p and try to run your stream directly from the atem to see if it is your network or your equipment. if it works then your bottleneck is the mac
@user-ii4gw3hr3l17 күн бұрын
@@AJaytheCEOso I tried to get it to 1080p but it still the same bad image and I changed the cable but nothing happened
@HonestArttsEntertain Жыл бұрын
thanks, but it was a little all over the place for me. I think people with basic live video experience would get it. Luckily I understood most, but still wasn't as concise.
@AJaytheCEO Жыл бұрын
Ok
@zach_879 Жыл бұрын
Do you have any issues with latency? If so, how do you recommend getting rid of it?
@AJaytheCEO Жыл бұрын
I do not but what type are you experiencing?
@gaiusimagbe2244 жыл бұрын
Thank you sir... Please where did get the output that links to the Atem mini please? Did you get the output directly from the mixer? God bless you sir
@AJaytheCEO4 жыл бұрын
My setup was a bit different in our main sanctuary but you can come out from the mixer directly
@qpadgett12 жыл бұрын
Thanks for the content! I have an Atem Mini and will be connecting it via my local network. Do I still need the usb connection for streaming software like vmix?
@AJaytheCEO2 жыл бұрын
If you are using vmix yes but if not, it is good to keep as some settings require a USB connection
@mjackson4094 Жыл бұрын
Were you able to split the usb-c signal? Im looking to use my sandisk and livestream via my computer at the same time?
@AJaytheCEO Жыл бұрын
Sorry no you can’t do that
@giovannidiaz36444 жыл бұрын
What brand/model is the monitor you are suing for the multiview? Are you going HDMI to USB C?
@AJaytheCEO4 жыл бұрын
I am using a Samsung 24inch pc monitor and the model isS22F350FH and I am not sure about HDMI to USB c
@country18613 жыл бұрын
Is there a way through easy worship, to have presented to the church as a full screen and lower thirds presented to the live stream using Atem?
@AJaytheCEO3 жыл бұрын
I am not sure. What version of EW are you using?
@mavicmediaworld12572 жыл бұрын
@@AJaytheCEO ew7
@ronaldj.cartersr.577 Жыл бұрын
I have just purchased a Atem mini pro for our church. We have only a Wi-Fi nest system available to use at the location of our equipment. How can I use this with our mini pro?
@AJaytheCEO Жыл бұрын
You need an Ethernet to wifi adapter: amzn.to/3qcZODo
@ronaldj.cartersr.577 Жыл бұрын
@@AJaytheCEO Thank you I will probably have more questions as we go forward with our streaming plan
@josemedina57323 жыл бұрын
We have that issue that when we go live we get a Static sound any solutions ? Please
@AJaytheCEO3 жыл бұрын
That is a very wide open question. I need more detail to even start. What are you connecting to the atem, did this happen suddenly, did it ever work before, are you setting the input to mic or line, is the gain too high and volume too low, etc, etc
@TheNewHarvest4 жыл бұрын
You stay reading my mind.... How tho???
@sedrickhyacinthe21333 жыл бұрын
After viewing many youtube videos on live streaming, especially for small churches, what is your perspective on pros & cons of using atem mini with or wihtout Software Video Mixer and Switcher (OBS, vMix, etc...)?
@AJaytheCEO3 жыл бұрын
The atem by it self works great and software is not needed. The added software gives more features that are more user friendly or that do not exist with the atem alone like chat pop ups
@DJDhruvmusic3 жыл бұрын
Where is atem control cat 5 connected to? Internet ?
@AJaytheCEO3 жыл бұрын
yes or directly to your computer on a closed network
@romaricndongmba4433 жыл бұрын
Can we use the ATEM mini with easy worship for live streaming?
@AJaytheCEO3 жыл бұрын
Yes
@bushwickfamilyministries12433 жыл бұрын
Great job AJ. Appreciate you. Question. Haven't installed the Atem Mini Pro in our church as yet (waiting for a few more pieces), but if we connect our presenter laptop (presenting EW7), how does that affect what the congregation sees?
@AJaytheCEO3 жыл бұрын
If connected to ATEM Mini, they will see exactly what your live stream will see
@zionlutheranchurchclark92934 жыл бұрын
I think I have the answer, but I will ask anyway! I am using Proclaim. If I have the words as you showed on lower third for live stream, is there a way to put it full screen on our screens at church, or do we need proclaim on two different monitors...One for in church and one for online? Thanks!
@AJaytheCEO4 жыл бұрын
I'm not sure. Which version are you using
@zionlutheranchurchclark92934 жыл бұрын
@@AJaytheCEO Thanks for checking. We have Proclaim Standard On Air License - 1-99, and Proclaim Pro Media - 1-99 If we can, but we would have to upgrade, I would love that insight too! Thanks!
@st.paulsfreeburg8214 жыл бұрын
We have the ATEM Blackmagic mini connected to our sound system (Sound Craft), but when the organ or any music plays, it sounds garbled. However, the voices come out fine. Can you please help me to correct this problem?
@AJaytheCEO4 жыл бұрын
Do you have a sample video of this?
@st.paulsfreeburg8214 жыл бұрын
@@AJaytheCEO Yes. Here's a link to one of our videos: kzfaq.info/get/bejne/oc6niq6C3JnSiqc.html Thank you!
@aarifgbradley3 жыл бұрын
You probably have your mic set on mic and it needs to be changed to line in settings. That’s what the recording sounds like
@bazelaireauredy209411 ай бұрын
Hi AJ, Any work around to generate 2 output without costing too much?
@AJaytheCEO11 ай бұрын
USB out to OBS, with OBS connected to your desired display, HDMI out from the atem to your other desired display, get a streaming bridge and you can stream to it for another display but it will only display the exact same thing coming out of the USB. Anything other than that it will not work with this device.
@bazelaireauredy209411 ай бұрын
@@AJaytheCEO thank you. I was looking to get two separate displays.
@CoyneDigital4 жыл бұрын
How did you add Vimeo as a custom Platform? I only have Facebook, KZfaq, & Twitch as options.
@AJaytheCEO4 жыл бұрын
Here you go: kzfaq.info/get/bejne/nMCRh6qorqipqJ8.html
@SeanCoynecom4 жыл бұрын
Perfect. Thank you.
@gangmeikung4435 Жыл бұрын
What device is needed for projector/screen show with this mini atem pro
@AJaytheCEO Жыл бұрын
What do you mean by projector/screen show?
@cyabongampaul4 жыл бұрын
This video is so informative, currently budgeting for the mini pro but our idea is to connect 3 cameras, and type c for webcam and embed the graphics via Easyworship then projection, we intend to record the clean switching without graphics to edit later for our tv program and social media, and the HDMI out to Multicam. What's your opinion on this and what did you use to get the longer hdmi connection?
@winnerschapelcolumbus4 жыл бұрын
how do I display the program view from the mutilview to the projector screens in the church without the entire multi view showing? I need the multi view for myself in the studio but don't want the congregation to see the mutliview. I 'm using hdmi to connect to the projector screens on the walls
@enejeemmanuel26444 жыл бұрын
I am having cache full problem with my streaming on my Atem mini pro, please I need help urgently.
@AJaytheCEO4 жыл бұрын
ATEM Mini caching is when the ATEM has lost a connection or can't connect to your streaming platform. You should check your ISP or your platform for issues.
@enejeemmanuel26444 жыл бұрын
@@AJaytheCEO thanks for the response, connection was fine, internet upload speed was more than 5mb/s, and I was streaming low. I noticed this after I attached and used castr for streaming on the Atem mini pro
@genepate66913 жыл бұрын
Can the ATEM pro stream to multiple social sites at the same time, ie..Facebook/KZfaq?
@AJaytheCEO3 жыл бұрын
Only through a service like restream, split stream, castr, etc
@genepate66913 жыл бұрын
Thanks
@jadittepierre26713 жыл бұрын
the counter below ON AIR remains at zero
@AJaytheCEO3 жыл бұрын
???
@jadittepierre26713 жыл бұрын
@@AJaytheCEO I am referring to the counter that is beneath the ONAIR 24.00 mins into your video. your is counting upward and mine stays at zero.
@TheJoshdimples0074 жыл бұрын
Hi Ajay, how's your sound from the Mixer perfectly synced to the video from the AtemMiniPro? I didn't see you adding any delay.
@AJaytheCEO4 жыл бұрын
I have not done a long stream with the mini pro yet to see if there is still a delay but I am also recording through the mini pro as well so maybe they fixed it for internal recording.
@JakeGuptill4 жыл бұрын
AJaytheCEO I always take audio from the board to a camera with xlr inputs... then take audio from that hdmi on the mini.. that way audio and video are in sync. You have to be sure your camera inputs can handle line level, and you want to make sure your camera isn’t clipping the signal.. but it solves the sync issue!
@philiplian80793 жыл бұрын
I don’t make sense the one that ATEM software control and then drawing for me how to connect the hdmi and the Ethernet cable is between ATEM to the computer right?
@colinanderson59454 жыл бұрын
Hi this was very helpful! I was wondering when you had your computer plugged in via HDMI to the ATEM's input for the lower thirds, what does the ATEM display? Is it acting like another display for the computer or does it just duplicate whats on your main monitor?
@AJaytheCEO4 жыл бұрын
It acts as another monitor
@colinanderson59454 жыл бұрын
@@AJaytheCEO Thank you!
@alfeushersandy3454 жыл бұрын
Hy ajay, can you show me how to output multiview in atem mini pro in 1366*768 monitor ? Thank you
@jadittepierre26713 жыл бұрын
Hi AJ I just got an atem mini extreme I got it set up but I cannot stream to youtube. I have my stream key put in got video in pgm, and I hit the stream button and my switcher does not appear to connect to youtube even though the switcher says it is streaming at about 4.6Mb/s. my servise is 100 down 10 upload. did I miss some thing ?
@AJaytheCEO3 жыл бұрын
Does anything show in KZfaq studio?
@jadittepierre26713 жыл бұрын
@@AJaytheCEO youtube studio keeps circling trying to connect.
@denisiunusov9693 жыл бұрын
Thanks for the video! Do you have any ideas how I can rid of that hissing background sound when I connect my audio mixer directly to the atem mini using rca-3.5 jack cable? Is there any way to do it without a di box? And if not, which one would you recommend? Thanks, brother!
@AJaytheCEO3 жыл бұрын
you need to change the input on the ATEM to line instead of mic
@denisiunusov9693 жыл бұрын
I did. I can hear all mics, piano, guitars ... and hissing noise on the background. In this video you have the same kind of noise when you went to play piano
@AJaytheCEO3 жыл бұрын
@@denisiunusov969 Then that is something from your mixer. Do you still hear the hiss through headphones coming from the mixer?