I’ve been doing lots of research on machines and glad I found your channel. I’m ordering one of these and you answered my questions thank you. Shipping time would give me time to build the needed table for it.
@Samcraftcom3 жыл бұрын
Awesome! Glad I could help!
@mauriceaustin36573 жыл бұрын
I sure enjoy your easy going videos. Thank you for taking the time to make them. Some day when I understand enough about CNC machines. I WILL have one of these. Because of you and your videos.
@Samcraftcom3 жыл бұрын
I appreciate the kind words and your commenting!
@OGs_Playground3 жыл бұрын
I appreciate your up front delivery. I am a new Pro owner as well. I experienced the same issues you did. The rigidity of the machine and the customer service easily makes up for the wait I experienced.
@Samcraftcom3 жыл бұрын
Happy to share my story! Thanks for sharing yours, Rob!
@Annacats25 Жыл бұрын
This is exactly what I'm looking for - an unbiased review of the Shapeoko Pro. I'm close to buying this tool to make signs from wine barrel heads. In the last few years, I've been using the barrel heads for firewood or give them away. Now I want to make some $ on the side of my wine barrel furniture. Thank a bunch for your input!
@richkrabbe29502 жыл бұрын
Thanks Sam, you really helped me make up my mind on what CNC to go with! Great video!
@northstarprepsteader3 жыл бұрын
Great vid Sam! I just always love :) your sense of humor! Even though I don't have a woodworking shop like yours, I can appreciate the value of tools needed for the job. You've got a great business going there!
@Samcraftcom3 жыл бұрын
Thank you very much!
@dah4x42 жыл бұрын
You are a straight up guy! Glad I found your channel. Excellent content 😀
@jasonp.76623 жыл бұрын
Great video Sam! I ordered my machine at the end of December and it arrived at the end of January. I finally got the chance to build it about 2 week ago and I was missing the plastic strips. They did leave me a note saying that they were back ordered. I emailed them yesterday, on Sunday and I got a response from them last night. Today, on Monday I got an email saying the parts have shipped overnight and I should receive them tomorrow on Tuesday. By the way, I love the $100 CNC table. I had a fun time building it. I will be working on the drawers in the next few weeks.
@Samcraftcom3 жыл бұрын
Hey Jason, great to hear that! BTW you can go ahead with assembly and put the black strips on after the fact. At least I was able to. My machine was also shipped without them. That is... if your bed frame extrusions have dados milled into them like in my video. I saw in the FB group someone else had different bed frames and was told the dados were to be phased out for some reason. *shrug*
@JaytheP3 жыл бұрын
Excellent video Sam, I’m glad you kept it real. I’m planning on getting the Pro for speakers, so I’m going to keep a close eye on missing parts and delays
@Samcraftcom3 жыл бұрын
My pleasure, sugar coating it or pretending wouldn't have helped anyone in the end. :)
@ryanjohnquest56643 жыл бұрын
There really is only so much our friends and family can take when it comes to hearing about CNC 😂
@jasonyannuccelli24992 жыл бұрын
Good one Sam 👍 Thanks for the honest review. Helps a lot for someone like me in weighing up if this product is the one for me. Cheers
@onefastbob2 жыл бұрын
My Pro XXL arrives today. Wish me luck. Great video as always. Keep up the great work!
@Samcraftcom2 жыл бұрын
Good luck!
@kevinrafferty97483 жыл бұрын
Just bought one today! I've been watching your videos for a while now
@Samcraftcom3 жыл бұрын
Awesome!!! Huge congrats!
@hem1kat3 жыл бұрын
Your order process sounds like my Tesla ordering process. Hope to get one of these soon. Thanks for sharing . Its always best to know what you are getting into when you order.
@jeffstapleton22772 жыл бұрын
Sam want to thank you for your video's very informative. Best on youtube. Being a retired contractor I will look forward to seeing your new shop go up. Happy New Year.
@Samcraftcom2 жыл бұрын
I appreciate that! Go easy on me... I'm no pro builder! :)
@MaximAvs3 жыл бұрын
More people need to make a video like this! Thanks Sam! You can definitely fault Carbide with lack of COMMUNICATION!! Communication is FREE
@Samcraftcom3 жыл бұрын
I agree 100%. Happy to provide the truth. :)
@daxshell2422 жыл бұрын
communication is most definitely not free when you are understaffed. running a small business, i can easily sink 8 hours a day, for a week, just responding to customers. customer relations and technical support is a full time job once your company grows to a certain size, it just tends to be an underinvested part of most small businesses, since they need to keep prices low to compete with overseas competition.
@mctheta Жыл бұрын
Sam - great video, this was my first time finding your channel. In the market for the Shapeoko PRO XL currently and I've heard nothing but good things overall about the company. Thank for the great info!
@shaunbayliss97112 жыл бұрын
Sam just to say that your video on the shapeoko pro, is a top man support. I have just purchase this machine for my hobby as I have just retired and needed a video's like yours too help me through the installation and setup of the machine, I will be watching your cannel for any new tips and trick to ensure a smooth running of my machine.
@Samcraftcom2 жыл бұрын
Awesome, so happy my videos can be of help!
@Whois24403 жыл бұрын
Great Video Sam. I am a XXL owner for about 2-3 years. Mine was also missing parts (belts & drag chain), and it also had wrong bolt lengths included for one section that causes me to make a visit to the local home store. I also had a board go bad, which they covered under warranty. They forgot to send me the board, so it took several phone calls to have them FINALLY send me the replacement board. They did make it right with a bit set as a "I'm sorry" gift. Honestly even back then (2-3 years ago) they were still peddling the same excuses. I think they would greatly benefit from a QA department that would verify the orders before going out. I love my machine and have continued upgrading the different options they have released over time. I do agree support overall has been pretty decent. I ended up choosing VCarve Pro for my CNC design software and it suits me fine. I'm currently building a new house, and the CNC is sitting in the garage un-used. I'm sad by this ;( I'm excited to get my home completed, so I can take advantage of my 1070sqft garage/shop. I plan on doing several of the projects you built, so thank you for sharing those.
@Samcraftcom3 жыл бұрын
I whole-heartedly agree -- they need to hire a dedicated QA team and check orders. I bought a BitRunner and received it yesterday to find it was missing two screws to mount it to the side rail. Thankfully I had some on hand, but still... Best of luck with the home build and new workshop!!! If you have any project ideas or things you'd like to see me try on the CNC let me know! :)
@tommelinn42682 жыл бұрын
Very helpful as I am considering a CNC now!
@bladerunner65832 жыл бұрын
nice comprehensive review, cheers!
@awlthatwoodcrafts89113 жыл бұрын
Well done, Sam. Glad to hear that all has worked out for you, regarding your CNC investment. Dust collection seemed to be the only "support" issue you've had with your new CNC, but that is not the fault of the CNC, it just comes with the territory. Keep on keepin' on. With many of the other KZfaq woodworkers growing beyond what most of us can relate to, I love watching your videos because, well, I can relate.
@hescowall13712 жыл бұрын
I ordered my 3 XXL about the same time and had the same experience. Also I had ordered a Laguna Fusion II table saw from Rockler and it was also very delayed in shipping. Neither Carbide, Rockler or Laguna reached out to keep me up to date on what was going on. I'm very happy with my equipment but my projects were delayed for over a month.
@mitziseyfferdt38663 жыл бұрын
I respect you for this video, you did not knock the company into the ground, but gave a very true and heartfelt review, I feel that I can trust you on any review. Thank you 🤜🤛
@Samcraftcom3 жыл бұрын
I appreciate that!
@josephbohme79172 жыл бұрын
Honest review, very refreshing Sam. Sizing up. Keeping one smaller for productivity on many jobs not requiring a bigger bed. Then having a bigger one also for the larger demand that may come. Me, Signage. Making desing frames like a door and other smaller one cutting single lletters to be set into hogouts on big sign for dimensional looks even use hard foam material. Can pour and make your own polyurethan blanks if desired.
@everythingnnothingpodcast3 жыл бұрын
Great feedback, thank you. I will be in the market for a CnC machine this year. I am still shopping.
@Samcraftcom3 жыл бұрын
Good luck!
@nwrasch2 жыл бұрын
Super helpful; thank you!
@stvcolwill3 жыл бұрын
thanks again Sam for another great video. I live in texas and was delayed a bit on the shipping of my PRO XL... again, just like you, not their fault. I was able to put mine together this past weekend and just like you I was missing the plastic strips. Tried calling all day today (Monday) but it kept going to voice mail after holding for 10 minutes each time which is somewhat annoying. I finally gave up and left a message. My experience when calling (before this) has been great as well. They're definitely on top of things. When UPS delivered my first bog box, it had abouot 3 inches or so of water damage (like it had been sitting in water)... and after taking pictures upon their request, Support got back to me pretty quickly and said that it's probably ok since the electronics didn't get wet - just a couple of aluminum end-plates. They suggested that I keep an eye on things during the set up and to reach out to them right away if anything wasn't working properly. I was pretty impressed at their quickness to respond and courteous and professional responsiveness. All I have left is to buy a Makita router. Who knew that in all of the Dallas area Home Depots, all of our 9 stores were fresh out of Makita routers!?!@@!@# WTF!? anyways I ordered one off of Amazon and it promises 1 day. My machine like yours is pretty squared up right out of the box. I'm pretty stoked and impressed with that. My next steps are to do the obligatory 'hello world' exercise, then do the calibration movements to see if they are instruction-to-real-life-move equal. Getting really exited at this point. AND YES, this thing is definitely more 'beefy' than I thought it was. TRULY IMPRESSED with the 'pro'. AGAIN, thanks for your videos, and thanks for keeping it real!!!
@Samcraftcom3 жыл бұрын
Thanks for sharing all of this, Steve! Very interesting to hear your story and experiences. I would have been sick to my stomach getting my machine with water damaged boxes! Here's hoping you never have any issues as a result of it. Also best of luck assembling yours! I was pleased with the process and it wasn't bad at all, even with me filming the whole process I was done in 5 hours max. My pleasure to offer 'real' videos as well... it does no one any good sugar coating or pretending, IMO. :) Good luck!!!
@stuffwithkids712714 күн бұрын
Thank you Sam. Now, July 2024, They seem to have it moving smoothly. My accessories whipped in a day and my machine shipped in 5 days, due to be delivered in 4 days, the 5 Pro. Wish me luck!
@ComgrowOfficial2 жыл бұрын
Really appreciate this video. Right to the point!!!
@bnelson313braveheart82 жыл бұрын
Thanks for the honest review.
@protect.your.digits.creations Жыл бұрын
Thank you your input was very helpful . I am presently shopping
@jsoffgridhomesteadcommunit90323 жыл бұрын
Great video sam..I was kinda in the same boat as u with my Millright Mega V..XL..the only difference is they actually kept me up to date on the delivery delay..and there were no missing parts..but extra that they included with the kit..I appreciate the honesty of ur video and I hope my video i do about the Mega V is as good
@Samcraftcom3 жыл бұрын
Thanks James! I just binged your videos. :) The MillRight is a nice looking machine!
@ChrisHornberger Жыл бұрын
Just made a deal to get one of these second hand, and am looking forward to it. Thanks for re-affirming what I've heard about the general quality and robustness of the machine.
@Samcraftcom Жыл бұрын
Hope you enjoy it! I've not been able to use mine for about a year (moved and setting up new shop is slow), but look forward to it soon!
@johngilbert552 Жыл бұрын
great video…….not only are you knowable but easy to listen to
@dandeflavis7004 Жыл бұрын
I am a carpenter, that said after buying festool products the price of the pro really isn't bad for what you get. I am currently looking at buying the XXL pro or the hdm. I have a production run of chairs coming up soon and they require a lot of layout and the 12 chairs use about 1850 4x20 dominos and 450 8x40 dominos all done in solid mahogany so I started looking into a CNC router to do the bulk of them.
@CarlPugh2 жыл бұрын
Great video! You earned another subscriber.
@ninjaninja13773 жыл бұрын
Great and honest video Sam!
@Samcraftcom3 жыл бұрын
Thanks!
@cliff52403 жыл бұрын
Bought an XXL in July 2020 before I knew the PRO was coming out. Their service and support is absolutely #1. I really didn't use the machine much until October because I was new to CNC and was trying to learning the in's a out's. I started making stuff to sell for Christmas and was swamped with orders -- great stuff!! But then I started having disconnect issues, most likely because I live in Indiana and colder weather meant turning the heat on and more static electricity. So I was ready to pull my hair out because I would get 1/2 way into a project and lose connection. I e-mailed the company on Thanksgiving Day and they responded in 2 hours -- who does that on Thanksgiving Day. We went through a lot of trial and error to figure out the issue and they sent me, free of charge, items to deal with the electro magnetic Interference. Their support just can't be beat. I think the issue with the PRO was they just didn't realize how popular it was going to be and couldn't keep up with it. I am happy with my purchase and the company. For a hobbyist or small business it is well worth the money. Great video with honest input!
@Samcraftcom3 жыл бұрын
Well said, and what an awesome story about the support from C3D! :O
@MrRenoman20112 жыл бұрын
enjoy your videos Sam thanks
@pm9dcr2001 Жыл бұрын
love it!, thank you
@dennismacwilliams1963 жыл бұрын
Great Video, real down to earth Thanks
@Samcraftcom3 жыл бұрын
Glad you enjoyed it, happy to help and/or offer the real truth on things. :)
@bullswoodworks83983 жыл бұрын
great video Sam. TY for Sharing......we Subscribed! Totally agree with the "small business" issues; We all deal with it and communication with customers is something I take pride in. I have heard about the black strips issues....waiting to purchase this one for the shop. What online groups do you recommend joining for mediocre players?
@OnePotMeals3 жыл бұрын
Thanks, good honest review
@Samcraftcom3 жыл бұрын
My pleasure!
@gsamek3 жыл бұрын
Thank you for the video. I am trying to become a new CNC owner but the Shapeoko XXL Pro has been sold out for several months now. If they become available, I am told that they sell out in about 30 minutes.. I very much enjoy hearing about the CNC router that you have purchased as it helps me to believe that I have made a good choice in going after it myself. I just hope it comes available very soon.
@Samcraftcom3 жыл бұрын
Glad I could help! I continue to be very happy with the machine and its capabilities far out-pace mine at this point. :) Carbide3D is a good company at heart. I think they're faced with growing pains right now. I would buy the Pro again if I were in the market today.
@JimDockrellWatertone3 жыл бұрын
Thanks for the review Sam
@Samcraftcom3 жыл бұрын
My pleasure. :)
@user-wt4ni7ro1h5 ай бұрын
I got my Pro about 5 months ago. The wires were not marked and so I had to call. They walked me through the process of using a heat gun to activate the labels on the wires so that you could read the labels. I think they should have stated in the instruction booklet to stop and call for wiring hook-up. Then they would know when to start the clock for my 1 month period of protection (break anything and it will be replaced for free). Instead the rep told me that they started using a new supplier of the wires. That remark made me question the quality control. After this period of time I am very happy that I went with this machine.
@alassafcam3 жыл бұрын
Thank you and have nice machining bro 👍🏼.
@barkingspider48613 жыл бұрын
Right on Roy !
@gtcountryliving3 жыл бұрын
I received my pro in February and I went through 2 router before I finally decided to buy the makita router from home depot and love it . Plus it's more quiet
@migoalaso2 жыл бұрын
Did you originally buy the Carbide compact router then replace it with the Makita?
@ekemanakanui40092 жыл бұрын
Great review
@homezero3 жыл бұрын
I have watched this vid before since it shows I liked it then. I watched it again today because I am looking to get my own Pro XXL and what do you know... it is out of stock. going to have to wait 2-3 weeks for restocking. I hope I get my order in to be able to get mine with the next round. Keep the vids coming Sam!!!
@Samcraftcom3 жыл бұрын
Here's hoping you get yours soon, too! :) Glad to help with the videos and I'll try to keep them coming as quickly as I can. :)
@TwoCaptainsOneShip3 жыл бұрын
Thanks Sam, just learned about this machine today as I’m in the market. I’ll check out your Chanel to see some projects you’ve made on the machine.
@TheWoodHaven3 жыл бұрын
Don't pay attention to this guy. He's a Bott.....(sorry, couldn't help it)
@TwoCaptainsOneShip3 жыл бұрын
@@TheWoodHaven did you stick with the software they provided or you use another? Bott...out..🤦🏻♂️
@TheWoodHaven3 жыл бұрын
@@TwoCaptainsOneShip Never got past the intimidation/cost point. In other words, I never bought one.
@Samcraftcom3 жыл бұрын
I have a handful of videos both about the machine and the projects I've made. Hope you find them useful! :)
@jefferyatkisson77813 жыл бұрын
Agreed with this assessment. I think I was in the second batch. And sales was honest about timelines. I was missing parts also but nothing that stopped me from using it. Also a couple broken pieces that they replaced quickly.
@Samcraftcom3 жыл бұрын
Thank you for sharing your story!
@kenbraley8763 жыл бұрын
Oh and I did have a slight problem getting help from support. I was lucky enough to have the manual and found the problem was my setup configure. Had it set up for belt instead of V+. But never got call back from support, or it took so long I missed it. Still not mad. Just makes me a better operator.
@pointblankokc Жыл бұрын
Good video dude, thank you for that.
@Samcraftcom Жыл бұрын
Glad it helped
@Menelian3 жыл бұрын
I also bought a pro recently and had the exact same experience! One of my boxes was missing several parts, including the black strips and hardware to assemble the table. A quick email exchange with support had an overnight box headed my way. Unfortunately for me, fedex screwed up and left my box sitting in Tennessee for a week.
@Samcraftcom3 жыл бұрын
Hopefully you got it all sorted out in the end. Crazy FedEx did that! :O
@ClintonCaraway-CNC3 жыл бұрын
I also ordered the Shapeoko Pro on October 15th. I to was disappointed when it took longer than promised to receive my machine. However I am not in the same situation as Sam. I am a 48yr old disabled professional woodworker. I am setting up my retirement shop and for me EVERYTHING takes longer than I expected. That being said it was mid January before assembly began. I was SHOCKED by how much easier this machine went together compared to my original Shapeoko 3. This has been well thought out with the customer in mind. My machine came with all the parts but the BitSetter was missing a magnet and wasn't assembled correctly. No problem C3D overnighted me a new one.... well the new one was missing the copper bushing the plunger rides in. At the same time I had had finished assembly and realized my machines Z-Axis stepper motor wasn't working properly. A few email's to support at C3D and I was put in touch with Brandon. He told me how to begin troubleshooting and agreed to call me when I had the first few simple things required to trace down the problem. I jumped up and had it ready in less than a hour. This was at about 9:30pm EST on a Friday night so I emailed him back saying I was ready anytime he could get back to me. I realize there is a three hour time difference but I was available 24/7. Within a hour he emailed me asking if it were okay to call. I said sure. Now remember it's now about 11pm EST making it 1am in California. He called and spent over three hours on the phone with me. It probably could have been done in less than a hour if we both stayed on task but we are after all cnc enthusiasts and I learned a lot. We traced it down to be nothing more than a bad wire and that was shipped out..... you guessed it..... overnight. I was up and running Monday and everything has been great since. That is the end of my story for now. If I had a con about the Shapeoko Pro it would without a doubt be the Z-Axis. The Z-Plus is actually a z-minus in my book. Why build a machine heavy-duty on two other axis and then put the standard part on the third. The reason was because the Z-Plus is fine if you want to run C3D router and cut at 100ipm. Personally I wanted to reach the next level. After upgrading the Shapeoko 3 to the point it would easily cut with a ¼" bit at 0.25 DOC @300ipm I want more. Hopefully very soon this issue will be resolved 😉
@Samcraftcom3 жыл бұрын
Thank you for sharing your story!!! You're more knowledgeable than I for sure about the Z axis and spindles, but I can totally see what you mean. I'll get there someday with a spindle, but still have much to learn first. :) Forge ahead!!!
@stvcolwill3 жыл бұрын
CCcnc--- sorry to point it out... but the times are backwards in your post. 11pm your time EST is much earlier in the day on the west coast.. like 7pm in Cali.... not 1pm. thanks for posting your story, It's a great read. : )
@mjbrown12493 жыл бұрын
Hi Sam, just added a comment to your bitrunner video. I noticed your plastic strips missing in your original machine video, mine came without as well. Got them within a week or two. I started up my machine about 6 weeks ago and ran a few parts before trying to improve on the tram. It’s still a little out but tolerable. I drilled and tapped 2 holes in the router bracket so I could screw on the indicator directly. Works great for tramming the table. The other thing I don’t like is the router collet system. I have looked online for some options using ER collets but no one is making a direct adapter for say an ER 11 collet. Looks like an opportunity.
@Samcraftcom3 жыл бұрын
Word on the street is that Carbide 3D is planning something with ER 11 in the near future. Maybe a spindle offering or hybrid router. Not sure yet...
@Shadypoolguy3 жыл бұрын
Not a pro owner but had the OG version of the XXL. It was a great machine, for the price point and what it could do. I have since sold it and waiting for my new and bigger CNC to show up. Without the trial and errors I did on the shapeoko I wouldn’t be where I’m at today with Cnc. So anyone looking into getting into it the shapeoko is a spot on beginners machine and can take abuse from noobs!
@Samcraftcom3 жыл бұрын
Well said!! Congrats on the new machine!
@LG-ro5le3 жыл бұрын
I got a workbee but If i was to buy again i would get a shapeoko, the overall package with shapeoko is much better they give you software, clamps, spoilerboard, dust shoe everything you need, with workbee i had to do all that myself (and assemble the entire machine myself as it comes in parts) the machine constantly needs maintenance to keep it running accurate aswell so was impressed to hear that your shapeoko hasnt needed any maintenance the whole 3 months youve had it. Also carbide create is awesome the only cad/cam software for mac
@naveenkumarmangal96532 жыл бұрын
Thanks Sam for the informative video. Could you please tell me the expected assembly time for Shapeoko Pro?
@st0mper1213 жыл бұрын
Ok i got my first CNC in December. Picked up a onefinity woodworker. Now granted im really new in this world. i bought back in june but prob because i was classified as a pre order onefinity keeped me completely informed. they even tossed in free upgrades as i waited for mine to be built and shipped. they gave a free pro version of the dust boot :) I have been so happy with My Onefinity i even paid extra for the laser Jtech 7 w for 700$ just to keep it with onefinity. I could have got a 10w laser for 100$ cheaper but i have been that happy with the hardware and support from onefinity. i dont work for them or anything just love mine that much.
@Samcraftcom3 жыл бұрын
That sounds like exceptional customer service and an good example for other companies to follow!
@phlontstu3 жыл бұрын
I'm a noob too and I am strongly considering a Onefinity. It appears to be of superior quality but very close in price to Shapeoko. Haven't heard anything bad yet, only very happy customers.
@st0mper1213 жыл бұрын
@@phlontstu When comparing with shapeoko It's the belts downfall. belts stretch overtime screw and a ball much more accurate and lasting. Was the main reason why i pulled the trigger for a onefinity. that and i can upgrade it to a water cooled spindle if i need too.
@phlontstu3 жыл бұрын
Yes that's what I was reading! Not having experience to just know that myself... it just makes sense. Onefinity is on backorder until June right now! I guess one knock against them I have seen is that the system is rather proprietary... but demand seems super high for these machines and I want one too hahaha
@olavodias3 жыл бұрын
Most of the times I see a video saying “honest review”, I think it’s likely a sponsored video pretending to tell the reality. You video is an exception to this rule. You really provide great information, and shows both sides (the pros and cons), and you are clearly being very honest on your opinion. Thanks for making this video. It helped decide which CNC to buy, and it will be this one (once they have it available again lol)
@Samcraftcom3 жыл бұрын
I appreciate that very much. Good luck with yours when you get it!
@olavodias3 жыл бұрын
@@Samcraftcom thank you very much!
@timotao763 жыл бұрын
Hey Sam. Always love your videos. You always hit tbe mark when it comes to pertinent information. I have done a number of test cuts and each time I get a little more complicated with it. I wound up doing a 2 and a half hour advanced V-carve cut and when it got to the end, the alignment was off. Have you had any alignment issues at all?
@Samcraftcom3 жыл бұрын
Much appreciated, and happy to offer a real life look on things! Never helps to pretend or sugar coat things, IMO. :) I've not had issues with alignment, but also ran through all the calibration/tramming/etc. steps pretty soon after getting my machine. What do you mean by alignment? Non-parallel polygons? Oval circles? or something else? If the first two, I would check the calibration of your stepper motors to make sure they're performing true to life what they're thinking (i.e. 10" in the g code = 10" in real life).
@timotao763 жыл бұрын
@@Samcraftcom thanks for replying. When I say alignment... lets say I was cutting the letters I and O it would cut half of the I, then cut the O fine, then com back to the I and cut the other half slightly off alignment from the first half. Hope that made sence.
@steveferguson12323 жыл бұрын
Sam I agree with everything you said. I am in market for one and am yet to decide. The on thing I feel everyone should know is that due to the pandemic, companies world wide. This in my opinion is probably why all the logistic problems and delays. On the other hand Carbide should post a Pandemic COVID-19 disclaimer update on there website to keep everyone informed an send emails to existing customers waiting on machines. If Carbide is an American company, they may have been in a state that had to shut down. Again bad press on Carbides parts as they should let people know. Sorry for long post, loved the review and your videos
@Samcraftcom3 жыл бұрын
I completely agree. Someone else said that communication is free. That was a good way of putting it. :)
@glenschumannGlensWorkshop3 жыл бұрын
Thanks.
@patriotwoodworker60923 жыл бұрын
I’m right behind you Sam! I placed my order in November but got right after Christmas. I still haven’t made a thing yet. Trying to find software that won’t kill the bank and no, not carbide create! I’ll make my own video review in a month or so. You’ve inspired me to create a channel (I have 1 video posted). Thanks!
@Samcraftcom3 жыл бұрын
I'm really happy to hear I've inspired you to start a channel, awesome!!! I just clicked subscribe. :) Software is one of the hidden costs of a CNC (another video of mine in the works). Freebies like Carbide Create "work" but are extremely limited and slow. I'm a Carveco Maker fan for the low overhead cost, but it's also been a great CAD program to learn, has top-notch support, and is near limitless.
@patriotwoodworker60923 жыл бұрын
@@Samcraftcom Right and I was looking into it but they don’t support Mac. In this review video, do I see a tablet running your machine? I thought about the Surface but just run the CNC the price is high. Currently looking into Vcarve.
@stvcolwill3 жыл бұрын
@@patriotwoodworker6092 Tim, I just got my Shapeoko Pro XL myself. I'm also a mac person as well and I plan on using Fusion360, but I don't know if their new rules nixed the CAM parts. I needed a machine to leave out in the garage with my ProXL and stumbled on a very cheap Toshiba Windows 10 used Tablet. I was pretty impressed that is an i7 with 8GRAM. I only paid $200 for it and the seller was 100% with lots of verbage about 'can return for any reason at all no questions asked'. I got the PC in late last week and I'm pretty impressed with it. It's only 1.6Ghz but I think it's plenty for what I need it for. NOW to your software question. In the past week, when researching Vcarve and pro, I've learned that the ASPIRE is the big brother to the VCARVE and on EBAY I've found several listings for the older versions 9.5 (instead of 10). I don't know how you are about buying older software on Ebay, but mine installed just fine and it looks like there's support that goes with it, though the upgrade to 10 still is too steep for me so I might be getting myself used to some snazzy software only to wish forever that I could afford the upgrade. LOL!
@Samcraftcom3 жыл бұрын
@Tim Triest It's a Fusion5 tablet running Windows 10. It's not powerful enough for CAD, but runs the CAM software, Carbide Motion, with no problems. I've had it for two months and am very pleased with it. This is the exact one I bought: amzn.to/3chTWOm
@migoalaso2 жыл бұрын
@@Samcraftcom Sam, do you recommend the Carveco Maker over the Carbide Create Pro. And knowing what you know now are there any other programs you would recommend?
@thomassutherland13403 жыл бұрын
Great video! Do you have any thoughts on the bits you use for your projects (or wish you had gotten first)?
@Samcraftcom3 жыл бұрын
My number one bit used is a cheap 1/8" compression bit from Amazon, but I mostly use 1/2" baltic birch plywood too. My number two bit is a 60-degree v bit, then 90-degree v bit. These are also nothing special, but do a great job. :)
@johncarr1233 жыл бұрын
Can you do a detail video on using bitsetter and bitzero together and detailed workflow?
@jeffemro12 жыл бұрын
Good video, man. This was a three month video, I'm curious how you feel about it 6 months later? Same same or any other issues? I have a Shapeoko 3 which doesn't seem to share the rigidity and quality of the Pro. I guess I bought the wrong machine. A word about their customer service though: Not the best in my case. I have had major issues since day one. They threw every bandaid fix at me that they could. I'm still not up and running and now they've just stopped returning my emails. I guess they're stumped and just don't want to deal with me. I'll be shopping other brands.
@dodgeram2500ism3 жыл бұрын
awesome honest truth dont have the pro but have the xxl and the support is out of this world i was missing one part and the also overnighted it to me
@Samcraftcom3 жыл бұрын
Thanks! Just subbed to your channel, too. :)
@dodgeram2500ism3 жыл бұрын
@@Samcraftcom ty sir greatly appreciated
@heresteven Жыл бұрын
i finished putting it together this week. But bit setter won't work. I will have to wait till next week. Facebook group is helpful. Even videos are good. So far I like the machine and still learning it. I always wanted one for a long long time.
@judoyodan Жыл бұрын
Great video! A friend asked for some custom beer/wine tasting flights and I'm thinking of using it as an excuse to get into the CNC biz. Would you still recommend the Shapeoko Pro? Another? Thanks.
@resorter662 жыл бұрын
Sam what version of carbide motion are you running and what tablet it shone in this video .also where did you find the TCPP to do tool Changes. Thanks Jeff
@kfgreenwald1663 жыл бұрын
I'm been an XXL owner/user for over 3 years. As others have suggested, they have always gone above and beyond to correct issues. This applies to damage resulting from user error too. In my experience they have never hesitated to send me a replacement part even when I admittedly was the cause. As far as poor communication is concerned, I think they can be chocked up to how the pandemic has affected operations. The timing of the release of the Pro combined with the global situation has to be the culprit here. And yes, it would be nice to have instantaneous responses to inquiries, but as you suggested, that would likely have required them to hire and train additional labor. Which during a pandemic is probably no small task....which in addition to the difficulties that go along with all of that would likely result in a more expensive machine. They seem to have worked out the efficiency issues and hopefully can continue to keep the price point reasonable for us hobby and small business operators alike.
@Samcraftcom3 жыл бұрын
Well said, Kurt. :)
@RoigRageFitness2 жыл бұрын
I just bought your plans to make the table for this cnc then your video popped up.
@Samcraftcom2 жыл бұрын
Awesome!!
@pawpawscustomcreations64472 жыл бұрын
I had the same problem with the proverxl 4030. I love the machine however I received nothing from the company on when it was going to be delivered.
@jaimefigueroa31793 жыл бұрын
What type of experience do you need to run the program? Making wood logos and such...
@jasonbruce84483 жыл бұрын
My Shapeoko Pro arrived on January 16th and i'm still waiting for the black strips. Other than that I am happy with my purchase.
@elissitdesign3 жыл бұрын
Well… have you enjoyed your flatbed CNC?
@chtojeetovsezanyali2 жыл бұрын
can you please share the dust-collection system scheme. Like I see you made some special connections through containers...?)
@tgirard123 Жыл бұрын
I looked at the pro but in the end I went with the Fox Alien Vasto. It came with a spindle (I upgraded to a 1.5kw water cooled) and a 40w blue laser which works very well. It doesn't have the software (Runs on GRBL firmware) but it is a solid machine and eats aluminum and will even machine steel. There's videos on KZfaq. Support has been ... Well, not like Carbide but it will do.
@Liberty_Prime199 Жыл бұрын
Hey i'm looking at the Fox Alien Vasto myself, mostly for cutting steel (probably sheet metal of a 1-5mm thick), what are its limitations when cutting steel plate ? I think i saw there's a 2.2kW spindle, would that be a better upgrade for cutting steel ?
@TheFalconJetDriver3 жыл бұрын
Customer Service is key for any company’s success and communications is paramount. The word of bad travels much faster than the word of good. 😁🛫
@Samcraftcom3 жыл бұрын
That's the hands-down truth!
@mattl17583 жыл бұрын
Thx. I ordered mine a week ago and was expecting an email stating it had been shipped. Can you tell me where it came from? I’ve found a town listed, but I’m not sure if it’s the same company. Without exact information I’m wondering if it came from northern Illinois
@JPizzie233 жыл бұрын
Great and honest review video! It definitely helped assuage some of my anxieties. I just recently ordered one and haven’t received any updates either although the company did say it would be about 15 business days until shipping would occur after order confirmation so there’s still time. Otherwise, I appreciate your update and looking forward to seeing more of your content! Keep it up and stay safe, sir!
@Samcraftcom3 жыл бұрын
Glad I could help! You're going to love your Pro, I sure do! Don't be afraid to send an inquiry email to support@carbide3d.com to check if there are any status updates. :) I waited as long as I could then emailed to hear that it was out for delivery next day. That was before their new 'Shop' app or order status integrations were in place. I recently ordered a BitRunner from them and the shipping notifications were spot-on.
@kenbraley8763 жыл бұрын
Mine was a little different. I really wanted a Por XXL but when it was time to order I didn't want to wait 2 months to order and an other to receive it. So I found that Madder hackers had a XXL and it was 800$ cheaper I ordered it along with the T-slot kit, the bit setter, and the probe, and router I basically Got what I needed and wanted. I was still under price from the pro and was able to build a killer stand to set it on when it arrived. I have been cutting on it as a total newbie and finished my first completed sign that came out 99% the way I wanted it too. Still in the practice zone For another couple months until I get my skill level up more and learn the machine better. But all in all I love my beast. And that's her name, Bartha Beast! Oh total cost $3.0155
@JamesP_TheShedShop3 жыл бұрын
Warm weather is upon us.... can the cnc plow, plant, weed?😂 If I had one I'd play too . Enjoying both channels. Y'all (yuns) are wonderful
@Samcraftcom3 жыл бұрын
It would have to be a small garden... :)
@naveenkumarmangal96532 жыл бұрын
what is the gantry clearance of shapeoko pro?
@bpineusaf37903 жыл бұрын
I purchased the XXL back in June 2020. I had an issue with my router in December 2020 2 weeks before Christmas. I contacted support and sent photo's of where there was an issue with a wire which caused it to arch and burn the motor out. They overnighted me a new router with all new collet's and I was back up in running in no time.
@Samcraftcom3 жыл бұрын
A great example of their customer service, awesome!!
@manuelrosquete68183 жыл бұрын
Great job Sam, I really enjoy your videos. Did you by any chance consider the Onefinity CNC before buying the Shapeoko? I like both but not sure which to get. thanks
@Samcraftcom3 жыл бұрын
I did... what made me go with the Shapeoko was more about the company and its reputation (mostly customer support stories) along with the amount of community support (how many customers using the machine) that could be found. I also looked at the wait time for the machine's arrival and what else I would be looking at needing to buy in addition to the machine itself. Not all companies offer the same level of packages, accessories, or items. The OneFinity CNC was the #2 contender when I purchased in 10/2020.
@manuelrosquete68183 жыл бұрын
Thanks a lot for the info, I will definitely look into that.
@sherryleggett1612 Жыл бұрын
That looks like a fairly simple dust collection setup. Is it something you buy specifically for the CNC or is it generic?
@TheCartoons4you3 жыл бұрын
Sam, with all the information you have learned to date, would you get the Shapeoko Pro again or? And what would be a close 2nd for you? Thank you Sam!
@Samcraftcom3 жыл бұрын
That's the million dollar question!! I just spent some time looking at the ones that were on my top list when I decided to get the Shapeoko and think it's still top of the list for the overall safest bet as an investment of my money. OneFinityCNC is the close 2nd for similar price point machine. If money weren't as much an option (real pipe dream here) then Stepcraft or Avid would be where I would really dig into things. But that gets beyond the scope of a hobby CNC or small business CNC I think.
@TheCartoons4you3 жыл бұрын
@@Samcraftcom Hey Sam, yeah I have been looking at a few for sure, but as you state I think it may be the best bang for your buck. Glad your getting good use out of yours!
@ClintonCaraway-CNC3 жыл бұрын
According to Carbide 3D at this point they have received everything that isn't produced in-house in quantities sufficient to keep the Pro in stock through the end of 2021. If you feel like buying one for yourself they should be in stock for a while!!
@dhruvsingh56862 жыл бұрын
Hey! I am thinking of purchasing a Shapeoko 4XXL. I've been on the fence due to noise level. Would it be too loud for a townhome garage? Would I be likely to get noise complaints due to this machine?
@joeymerrell85853 жыл бұрын
My biggest deal when I buy a product is service after the sale. If I have a question or issue, I expect a response. I take pride in if anything I make isn’t 100% up to expectation, I will go around the world to make so. I expect the same from a company I do business with within reason.
@Samcraftcom3 жыл бұрын
Same here. I am 100% happy with the service I've received from Carbide 3D.
@rubenreynaga1572 Жыл бұрын
I own a shapeoko 3 xxl and i really like the company. My own complaint and i find it quite annoying is no one at least in my case ever picks up the phone I had always request a callback now when they call I could be driving or in a noise area or away from the cnc machine and not been able to solve the problem when I need to
@swedeburg19752 жыл бұрын
What kind of tablet are you using to run the software?
@ythniafps48562 жыл бұрын
can this cut steel, brass, aluminum, and titanium?
@daveyJ2138 ай бұрын
Hello. Must you have a computer in the dusty shop next to the CNC machine in the shop? Is there another way to get files into the machine, say a flash drive or a SanDisk SD card?