Those look amazing! I just did my first 3d carve (the same eagle you did) this weekend. I was surprised by how easy it was, and how nice it looks... Your eagle/flag gives me an idea of a gift for a friend of mine, just got a bit promotion, disabled Navy vet... Thanks for sharing!

I don't know if you were "complaining" about the unevenness of your stain on the eagle, 'cause pine does suck up stain very unevenly, but you could put down a coat of Zinsser shellac (spray can) give it a light sand then stain. The stain won't be so blotchy. Your waterbased finish will spray just the same -- no adhesion problems.

Very nice! I love it!! Nice job!!!!

I made so many flags by hand a few years ago. Nothing looked like yours but man with a cnc it takes so much of the work load off you. I'm considering a shapeoko very soon to start trying something similar again but with the much needed help lol. Thanks for the vids. Very inspiring

Beautifully done! Thanks for the inspiration

Oh my gosh I absolutely love this I watched every single second I didn’t fast forward if anything I might have rewound just to rewatch some thing LOL but one of the many favorite parts of this video is when the CNC was doing the stars and on the right side of the screen you showed it slow down to really sure what it was doing in depth

Love your videos!! Very helpful for newbie like myself. Have a shapeoko 3xxl that i bought used about 3 months ago. I've been using carbide create to learn. I upgraded to vectric software. Was it hard to learn how to set up tool paths and setting up new tools. Looks very confusing to newbie!! Love the eagle flag. Wanna learn to make things like that!!! Ty

Looks Great.I would really love learn how to make that flad.Thanks for sharing

so far ive not found a reason to rough cut my 3d carves with the bit i use. and itsa cheapo im impressed with its performance and i save time on not needing a tool change. nice job youve done on the flags and video thanks for sharing. i like the drawing and carving but my finishing sucks lol

Awesome work!!🇺🇲🦅

Great job! You answered my question in the first couple of mins of the video...

Dang great job !!! They look awesome!!!

Wow!! They came out so nice. I still carve my stars by hand with my Dremel takes about a hour or (3 beers) I had my Shapeoko 4xxl for about two months but have not use it for any projects so far, I need to learn how to use it so I can make some cool projects like that. Great work great video.

I would love to see a video of the design work for this project. Love your videos brother. Awesome work.

These look fantastic Also the time-lapse around the 7:30 mark reminds me of King of the Hill and how they done the intro to the show, the feels ^_^ Keep up the great work!

Looks great I’d love to have a thin blue line with my badge it. Keep up great work

Very nice work. I can think off a better way to Mae a little side money while doing amazing work and having fun doing it. I bought a shapeoko 3 early this year. I have not even tried to use it yet because I’m overwhelmed with it all. Excellent video

who cares what the neighbors think! you did great job!

Awesome work!

Verry good work👍👍🇳🇱 Greats from Holland

I really like the way it does the star's..I been using a dremel and it's so time consuming.. I'd love to have one of those CNC machines but i'm not that Computer savvy. I'd be worried that the machine be more than i could handle. I really do like watching you. I remember your sign you did with a Harbor Freight router and it turned out great.. Those Flags look awesome.

Those are awesome!

Great job

If you set your zero off the bottom instead of the top you never have to worry. Example.... what NEVER changes on a cnc ever (unless you surface of course)..... the wasteboard. You can have a disconnect or power failure or computer crash and return....the wasteboard will still be in the same place so you have Z taken care of. Plus if you add the Bitsetter it will handle everything after the initial setup.

Nice job sir

Stunning

Awesome flag, do you have a video showing the setup in the software.

What's the current price for one of those cool flags?

What size/type wood are you using? Is it a standard size you are buying at the store or are you cutting it down to size?

I would have like to see the setup on the Vcarve desktop.

Ok, these look amazing. I have been wanting to do a 3D carve but get lost on the software side of things. Can you do a video on how you set this up for 3d in CC and show your speeds and feeds?

Awesome

Absolutely love watching your videos. I would love to get into wood carving is there a beginer unit you would recommend that is on the easy side to learn? As always great video.

Just a couple a questions: what size is the wood and how long did that take start to finish? That flag really is beautiful!

That was the coolest one I ever seen. Can we make the designs in Adobe Illustrator? Or what program?

Would you share your settings on the eagle? I just figuring out how to 3D carve on the shapeoko. Thanks

Is this the Eagle file that comes with Vcarve?

Wondering if this can be done on a smaller cnc. I recently purchased a 3018 to get into the cnc world and came across your video and absolutely love this. If I can purchase a scaled down version of the gcode please let me know

Great video, beautiful flag. What are you using in your sprayer. I need to stop buying cans. Thank you.

What wood and thickness did you use? Great job btw looks awesome!!

Thank you Sir!

Man, I love this flag. I want to make one similar for my dad. I have 2 quick questions, if you dont mind. What do you use for the red and blue stain? And, what size ball nose did you use for the eagle carving? Thanks for the video.

What size material do you use for your flags? Awesome video

Hopefully your still answering questions. What PSI are you running in the sprayer? I seriously need to dump the rattle cans.

Awesome Job! How do you get your stars to come out so sharp? Mine always come out rounded at the points.

Wow. That is awesome looking. Are you just using straight lumber stock? At first I was thinking you were using 3/4" birch plywood but now it seems to be straight lumber. Id love to be able to make something like this so any help is appreciated

Enjoy your videos, can you answer a question for me? At 3:56 how did you get VCarve to cut out the white leaving the red circle? When I do it, it cuts it out. Thanks trying to put 🙏 on it

Wow someone with similar interests, cnc flags and carving and ATV/UTVing? Love your video. How much do you sell them foe?

Very nice, I would like to do one like this. What size are your Flags, 1 X 12 pine about 21” long? You make it look so easy 👍🏻

Looks amazing, do you have an Etsy ? And sell the svg or toolpaths g-codes?

what stain are you using and what are the color names? Thanks great video by the way I use Vectric Aspire if I can be any help to you.

I don't know if I missed it, but was wondering... What is your technique for staining the eagle without getting stain on the stripes?

Keep slaying and being great 🤙‼️ do you sell the svg / c2d files for this ?

Simple question from an interested newbie: What was the thickness of the wood?

Fantastic... what’s your website for product information. Great Xmas gifts.

Love the 3D but why are you leaving the red at the end of the white stripes? I feel you remove that. It will be perfect.

What clear coat do you use And do you add any thing to thin it or a hardener to spray, what size nozzle and pressure do you recommend Thanks Mike

hello, i was wondering what you recommend on leveling the shapeoko xxl

Is your EGA an STL file?

Do you think your stain? I have such a hard tine with the solid color minwax stain, dries so fast and can't get it off

What size compressor do you have to push the sprayer in the video?

OK, what did you use to create the intro, vid and music?

Hey! I am thinking of purchasing a Shapeoko 4XXL. I've been on the fence due to noise level. Would it be too loud for a townhome garage? Would I be likely to get noise complaints due to this machine?

do you give out the files to make this. want to make it just to see if i can. I can create other later. thanks

Do you thin your Polycrylic? If so what do you use?

You said you're using VCarve? Is the file available for purchase? Thanks-Kipp

How long does the cnc take to carve out one flag and eagle?

Did you purchase the eagle 3d file?

I came across a fully functioning 3xxl water cooled 1.5k vfd spindle for a good price. Do you think it’s okay to buy today as it has been around for over six years?

Just checking to see if you have any for sale?

Wish software usch you??

Here do we go to purchase one?

How much do one of these run?

How much for the flags with the eagle ?

How much how do I order one?

how thick was the stock?

id like to be too busy making these to sell lol

can any one buy the file from you?

What type of CNC router do you use?

Burn it then paint it.

Why don't you show how you design it so that NEWBIES can learn. Just showing it being cut out doesn't really show how it was designed to cut.

How much do one of these run?