Shapr3d Vs. OnShape : CAD you draw on an iPad??

Рет қаралды 77,080

Күн бұрын

Oh, so punny, I kill me.... So, this video we compare Shapr3d for the iPad Pro with OnShape's iPad application and decide which one we like more (or less) and why. So the real question is, can you really do CAD 3d design on an iPad ?!?... Sure, watch to find out what I have to say about it.
Lights by Sappheiros / sappheirosmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Music promoted by Audio Library • Lights - Sappheiros (N... ||
Disco by strange day / strange-day
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Music promoted by Audio Library • Disco - strange day (N...

Пікірлер: 74

@Z-add 4 жыл бұрын

i believe shapr3d has licensed Siemens parametric modeler. Shapr3d is more of an interface to a very complicated and capable cad engine. Which means it will grow crazy fast in term of features because most of it is already build in the Siemens engine.

@dodger1x 3 жыл бұрын

I have used both but I would sayl Shapr3d has really hit the mark and the dug i to the potential of the ipad pro as a pro cad device. It also that keeps getting better every 14days with regular updates and new features. In a year since this video was madd it has changed alot and it’s just keeps getting better. USDZ export, SVG import, lidar scanning and AR view should be just around the corner.

@istvancsanady878 5 жыл бұрын

Hey, thanks for the review. Actually you *can* import STEP, IGES and Parasolid files, so there is a way to go back to Shapr from your other CAD system ;)

@HandsonCNC 5 жыл бұрын

Yes I did kind of glaze over that.. I don't consider that a natural workflow... I am glad it is there! And its definetly a value add! but as far as a usage case, I would only export/import when I knew I was going to spend quite a bit of time in one environment or the other, as (for me) exporting out of Fusion isn't speedy (as the cloud processing takes time) and importing into Fusion isn's speedy (for the same reason) and then there is time importing and exporting, and moving the files about.. I could easily see the act of "moving" a model from Fusion to Shapr or Shapr to Fusion taking over 5 minutes.. Which is a significant jump from 10 seconds or so to just "open" something... But yes, if someone were going to spend 3 hours in Shapr3d on the couch or because that part of the model was easier to work out in Shapr then its worth it... But as a ubiquitous "I pick it up and there my work is" experience, that it is not..

@MrJohnspro 5 жыл бұрын

Great video I am someone who draws 3D models just as a hobby though, using SketchUp Pro an older version since now it is a streaming version where you have to pay, they have a free version that is pretty water down. I do enjoy the interactions I see with shapr 3D. Again great video. If you ever feel like it I would like to see in the future using shapr 3D but in a slower pace.

@vijaymortha2350 4 жыл бұрын

Bro which ipad model or samsung model tabs best for 3d drawings like cad , shapr3d

@thepixelpusher 4 жыл бұрын

Great vid, you’ve got a new subscriber!

@HandsonCNC 4 жыл бұрын

Awesome, thank you!

@thepixelpusher 4 жыл бұрын

Hands on CNC Thank you for some excellent video!!!👍🏻

@shadowr2d2 Жыл бұрын

Thank you for posting this video 🎉. You have a new subscriber. Keep up the great work 🎉. I’m new to 3D modeling myself. Looking to make my own computer 🖥️ case. That looks like a Star Wars spaceship 🚀. I will keep following you. Have a great day..

@shokk1967 2 жыл бұрын

Onshape is free for hobbyists. So it depends on your level really. I'm learning cad at the minute, on shape runs great on my laptop, and my tablet. I can't find another cad package that let's me practice on a computer and tablet for free.

@greggjohnson621 5 жыл бұрын

$240 is almost enough to make me throw down my Pencil. I was on the fence about Shapr because of the annual cost (even with the 30% discount offer I just got) but you sold me on it. Thanks for the great video.

@HandsonCNC 5 жыл бұрын

Glad the video was useful... It isn't cheap but it does a whole heck of a lot... Now I just want Autodesk to buy them and merge the tech into my Fusion subscription.. But only if they get lots of money for making a pretty great product :-)..

@alexlomes9259 4 жыл бұрын

Война ссср

@ohcrazydiamond 4 жыл бұрын

Gregg Johnson where did you get the discount? Thank you

@wyqid 8 ай бұрын

Onshape makes all your designs public domain, which means that although you cannot patent them, you can use them commercially. Regardless of the license agreement says in the previous section about non-commercial use, the later section of the same agreement states they are public domain and can be used for commercial use by anyone. Anyone includes you.

@OB3R5T 3 жыл бұрын

As a Student u get Shapr3d for free... Big Plus

@questforknowledge750 5 жыл бұрын

Your I pad cover is your problem I have same one it pushes on the touch part and messes up the pen

@kainshaw 4 ай бұрын

Intereting iPad case, can you share more info on that? thanks!

@funmaster4632 2 жыл бұрын

I like them both shapr3d needs an easier way to repeat patterns though.

@Joesdifferent 5 жыл бұрын

I wish you were right around the corner from my house

@Z-add 4 жыл бұрын

have you tried selfcad?

@harycosta 5 жыл бұрын

Sharp3D is the business! I now only use fusion for rendering, sharp 3D is way faster to modeling, 3D printing and I literally take with me everywhere!,,

@stefanofioravanti709 5 жыл бұрын

How does sharp3D with complex models?

@M.V.P. 3 жыл бұрын

Yo guys, I can tell you that this dude used onshape in an extremly ineffective way, hurt a bit to watch. Onshape is just capable as fusion 360 and has the same construction capabilities.

@M.V.P. 3 жыл бұрын

no shit, the construction he did can easily be done in 5-6 min., and much simpler. He took 5 steps to accomplish what you could do with 1. no shit😅

@portlyoldman 3 жыл бұрын

@@M.V.P. - it would be really nice to know how that is achieved. Do you have a video perhaps?

@M.V.P. 3 жыл бұрын

@@portlyoldman Got a lot of uni stuff right now. But I'm teachimg onshape to. My fellow industrial design students in the beginning of next year, might take this as an example and put it on youtube👍🏻 By the way, i'm not saying f360 is bad in any way, it's just doesn't make to much sense for somebody who doesn't know how to use either programm to 'review' them in that way✌🏻

@M.V.P. 3 жыл бұрын

@@portlyoldman but quick tipp: by just using mirror you can cut the steps used in half (maybe to a third lol).

@916senna 5 жыл бұрын

Good review, however I think Onshape would argue that the subscription is for the full web browser version and you get the iPad version for free. It’s a shame Shapr don’t have a web version or Fusion a proper iPad version. Onshape need the competition to keep there pricing honest. It’s already heading the way of solid works :(

@HandsonCNC 5 жыл бұрын

I understand what all comes with OnShape, and yah it is "technically" just a free extra to do iPad modeling.. But compared to an AutoDesk Fusion 360 offering their desktop offering has a bit to go for that price point. I don't want Shapr to go away or get hurt by this suggestion, but if I were AutoDesk I would be thinking real hard about just buying them.. But Shapr is based on a Seimens CAD engine so that may sound better on paper than it practically is to implement..

@ranasaab6560 3 жыл бұрын

Which ipad are you using? I want to buy an old ipad to run these CAD softwares, please let me know.

@HandsonCNC 3 жыл бұрын

2018 iPad Pro.. (which ever one came just before they added the Lidar.. A new iPad Air is probably faster..

@FalkensteinM 5 жыл бұрын

The camera position for filming the ipad is really weird, istn it?

@HandsonCNC 5 жыл бұрын

yah, its wonky.. I shot it from over my head from in front of me.. but then realized that would create an upside down video the whole time.. so I flipped the footage so it was right side up.. But yes.. The "right" approach would have been over the shoulder...

@chrisjacobs9934 4 жыл бұрын

yes... not a good angle

@Nofarewell 5 жыл бұрын

Wait a minute here. From which ipad model shapr3d can be used? This means I don't have to acquire the most recent one? Does it work below a pro?

@HandsonCNC 5 жыл бұрын

I am sure it will work on any of the pro models. Sadly I don’t have a non pro to test on. I would reach out and ask them direct on that one. Sorry I can’t answer it.

@DjZoniick 5 жыл бұрын

It works on the iPad 6th gen with Apple Pencil 1

@Nofarewell 5 жыл бұрын

Thanks guys for checking! Appreciated! :)

@rogboak 5 жыл бұрын

It works with current iPads that are compatible with the pencil, pro and standard iPad.

@Nofarewell 5 жыл бұрын

@@rogboak, thanks!

@victorma9355 4 жыл бұрын

In sharpr you could draw half the shape then mirror it as long as both sides is symmetrical. So technically you only need ten min for that model

@AngelBizarro 5 жыл бұрын

I’ve never used on shape but personally I prefer sharp 3d

@Z-add 5 жыл бұрын

i think CAM on Onshape is an optional plugin

@HandsonCNC 5 жыл бұрын

I haven't really dug into it given how onerous the licensing is vs. Fusion 360..

@doug_EX 7 ай бұрын

2500$ per year if you want to render. This is insane.

@hiteshchaudhary5676 5 жыл бұрын

Have you tried importing a big and complex 3d model in sharpr 3d how does it works !! is it as seamless as i5 processor laptop with onboard gpu??

@ezramantini8078 3 жыл бұрын

Yes. On a iPad bro with at least the A12 bionic chip. You can import a full rocket engine with all it's individual parts and it will work just fine. Though it's advised not to have any cpu & Gpu intensive apps in the background such as 3D games or PowerDirector or something.

@hiteshchaudhary5676 3 жыл бұрын

@@ezramantini8078 wow that’s great thanks for replying

@ezramantini8078 3 жыл бұрын

@@hiteshchaudhary5676 cool thing buddy. What do you plan to do with Shapr3D?

@hiteshchaudhary5676 3 жыл бұрын

@@ezramantini8078 nothing much bro i was thinking about designing things on go without worrying about having desk to open laptop and occasionally designing multiple assembly drawings I was just curious about capabilities of the software.

@gregbayeux100 4 жыл бұрын

Bonjour si une personne pourrez faire un tutoriels en français merci

@hmoazed Ай бұрын

Shapr3D doesn't support parametric modeling, that right there is a non-starter for me. Fusion 360 does, but it is clunky, buggy (I have to restart it every 20 minutes because random basic functionality just stops working, and it crashes a few times a day), and lacks some features OnShape has like using measurements as parameters, but as a startup you can use it for free (you have to apply). Then there is OnShape, another parametric CAD app, not buggy and clunky as Fusion, but holy crap, $1500 a year? They do have a program for startups though, you can apply and get OnShape Professional for free. Solidworks is another option, they also give it for free to startups (revenue less than $1M) but no MacOS support. I could run it on my Windows desktop and Remote Desktop to it from my Mac, but then I'm afraid the user experience will suffer (trackpad gestures, etc.).

@pk.finger 3 жыл бұрын

Thanks for the comparison, however I missed the part where you pointed out that Onshape is a full business solution type of software which can also be accessed via PC or MAC and offers way more possibilities in terms of assembly - joints and most important parametric design where the solids are actually driven by the sketches and will change the solids accordingly if well modelled - also one more thing: with the only drawback that your files are public, you get the full set of features with Onshape From my point of view: I like both and each for different reasons - who ever reads this, check out the free versions of both and either buy shapr3d ore use the free version of Onshape because for a hobbyist Onshape’s full version is way to expensive (but also not needed)

@gwp1915 2 жыл бұрын

Try free cad it’s not on mobile tho

@johnwinters 5 жыл бұрын

Thats some Jazzy ass music! I just got distracted dancing to it the whole time and stopped watching. lol

@HandsonCNC 5 жыл бұрын

Ha! thanks :-)..

@shahrezaa 5 жыл бұрын

i have bad ocd n your tab not aligned properly horizontally n vertically with the camera kinda trippin my balls

@HandsonCNC 5 жыл бұрын

Sorry about that. The angle was odd, the camera was in front of me and then flipped the video so it didn’t look upside down.

@shahrezaa 5 жыл бұрын

@@HandsonCNC yeah i understand. its just something minor and only in the start of the video. its a great video and keep it up

@jothain 5 жыл бұрын

My god that looks like it's slow process on tablet. Also pricing seems like to be way too steep for their features.

@HandsonCNC 5 жыл бұрын

There aren't a lot of options in this space right now.. I 100% agree a mouse and a keyboard are FAR faster tools.. But I can see valid casual CAD uses... That being said, I agree the price is pretty steep... Wish Autodesk would buy them and integrate with Fusion, but that likely won't happen as I think Shapr3d is based on some Seimens or Emerson Technology or something deeply industrial... But who knows... (well I guess they do ;-)..)