Make sure to subscribe for more fishing challenges!

You should put bigger hooks on it, more weight, and maybe a lip

You need to add more hooks and bigger hook also try to put some lead weights into the head of the shark

See if you can take out some of the segments. I bet it will run smoother.

Oooooh dont go to hobby lobby brudda

Put in each fragment a weight, should help a lot

All you need to do is cut out some of the sections, water can't get in between ,you need that "resistance"

Stick a spoon horizontallly perpendicular to its tail, so water bashes on it and makes it move

Perfect to catch this bluegill that keeps stealing my 15 feet lures

Maybe add a lip to it or a few things on each side of the tail to catch the current.❤I love your stuff tho bro keep it up❤Jesus loves you

You should do video of the winners of your past videos

I think you need to attach from where you put the line that goes to your rod, a bit lower on the shark maybe in the mouth.

That’s sick

Make the cut parts in the middle bigger so it wiggles more. That will definitely help and add bigger hooks for sure.

Use a shark rod so you don’t break your other rod

Paint it neon like a spoon luree

A lip would cause the head to shake back and forth, in turn making the body follow. It will also make it dive a little in the water

I had this idea like years ago when I was like 10 cause I had 1 of those and I thought "what if I put some hooks on it"

You should take some of the little sections out, so it has better action

You should try to make it bottom heavy

Put bait on it 😂

Average bluegill bait

Drill little holes in the bottom and then put metal in the bottom and glue and seal it so it won’t be so top-heavy

I painted one actually

Couldn’t find smaller hooks? Sheesh!

Why you dont put gray paint

get bigger hooks (4/0 or 3/0), a strong musky rod, 40lb braided line on it, 1mm thick footlong fluorocarbon leader. Coat it with superglue to not get it waterlodged. Make a polycarbonate dive lip too.

You have to take out a couple of segments

put a few split spots in the head section

Paint it put more hooks and some led in it to help it sink so you get the movement and then I think it should be a good one.

You got to ballast it.

Lead in the bottom with glue and soda, the soda acts as an activator. It’ll stay uprights. Learned from Marling.

MAKE IT INTO A CRANKBAIT😂😂😂😂😂

Try adding a very small lead weight to the bottom, so that it will be constantly tilted upright, since the buoyancy of the woods and the weight of the lead counteract each other

Might be hard to add weights but bigger eyelets and trebel hooks might do it

Make it a Plopper💥

Might want to put weight on the bottom to keep it up right

Make bevels between segments so it has more space to move, and maybe use like a belt sander to profile the body a little wavy.

Cut the segments to make them actually angular and it will run

Bigger hooks plus a lip would be nice

Make it less heavy,lighter,shave the joints down a little,and bigger hooks.

Put a bill on it 👍👍👍

Video with it?

make a little crank thing in the front for the movement and make it out of a soda can

Maybe a bill to keep it all the way underwater?

You could put weights and n the bottom to keep it up right

Bigger hooks then dill several holes at the front and back and put some split shot or lead in it

Maybe a diver on the front so it sinks?

A sinker?

Put a another screw eye and then put a bell wait on that screw I will help it sink and it’ll help keep it straight

NEVER BACK DOWN NEVER WHAT!!!! Never give up

It needs a lip and it'll swim..... maybe a weight in the bottom front behind the lip so it submerges a bit

Needs weights on there somewhere, maybe a lip to get it to dive and stay on path

Drill holes on the top so there would be air and then it will stay up right

Put lead weights in it

Maybe trim the wood to let it wiggle more

You should shave the tail were the middle part is in more into it. In the end of the tail very end is like a hammerhead, then put that tail to look down words.

You may want to get some whittling knifes and cut down the slits a little to give it more action

You need a blade on the front like a hitter bug

You need to cut some of the segments out of it so it Wiggles more cut the fins off start there

Its top heavy which is why it keeps fliping and not swiming properly

Lip! just add a lexin polycarbonate/acrylic lip on it. Check out the marling baits snake lure for reference.

Put weight on the bottom to keep it upright then put a vertical lip on for some resistant than you should be there

Bigger hooks, paint it silver and black and remove every other segment

no fish will eat the wood, they will bite to see if it can eat or not.

make the slits in the wood bigger and the hooks bigger

Maybe realistic color for like yellow or someting

Yes do the snake 🐍!!!!!

Everything can be worked out everything just haha to be on the level or there will be doubts on q side or the other make sure that damn shark knows your gonna keep him clear coated and taken care of

Add lead in to the wood

Put wait on bottom of lure

Get some big weighted treble hooks and put on there.

Try putting the screw eye in on the top of the head

Cup little chunks out for more movement

Make it into a jitterbug

Needs a big polycarbonate crankbait lip or else it won’t wiggle

Add more weight so its just below the surface and paint it a little

Center the front line tie

As a kid I got one of those and a snake when I went to the beach I would break it the week I got back good times

It needs weight in the belly of the head. Drill out a quarter inch hole, and put birdshot in there. Then use super glue to have it stay in. Or, if you have any lead you could mash into there would work better.

Put a bill on it

Put a bill in its mouth for it to glide

Paint it light colors or chartreuse and maybe add bigg hooks and lip

Try taking some chunks out of the thing that moves

Mabye it needs some painting? ❤

Cut a little bit out of the segments. Too much weight and it Needs to load the weight evenly as you reel in to create the action. so the front is more load bearing, back end should probably have some sort of lip like a crank bait to give more action. You might think I’m tripping but if you cut out a little bit of those middle segments you’ll have a much more properly weighted swim bait

Wait the nose or cut it to create a crankbait angle

Put the little plastic piehe to the mouth to help it sink

Let’s go

Make a Lego lure

Try putting a squarebill on it

Put some weights in the bottom, it keeps flipping over and floating. If all else fails put a lip on it

A bull maybe 😊

Put a big weight and Some stuff on it, so the fish can smell it

Color it black on the top and white on the bottom

Add a lip on it kinda like a crank

You should put a lip on it or a popes hole hole to make the action look better.😊😊😊

Put lead in it

Because it’s just floating

Make it a popper