Thanks for watching! Don't forget to check out our Woodworking Plans / Courses: www.foureyesfurniture.com/plans

A true Shaun Boyd piece and video. Sharp looking, modern design, great film work, thoughtfull, yet humble narration, no live edges, no epoxy. Perfect!

I feel like this has the quintessential retro futuristic look that a lot of midcentury modern furniture had back when it was new! I love it

Beautiful piece, and I can’t stress enough how important it is to hear how long it actually takes for you to accomplish a task. I fight with rushing my work and learning that 5 sec cut on KZfaq took 20 minutes to setup is something I need to focus on. Thanks again!

I can’t put my finger on a single thing but the culmination of the beautiful piece, the introspective commentary and showing how you work through a piece; this is the best video I’ve seen in awhile. Thanks for making this!

That's awesome. I'm super glad you're making your own videos again, hope we see many more!

I really loved the time estimates. Nobody really talks about how long it takes to do these things. Excited to see more of your videos

Beautifully made and thank you for not hiding a small mistakes(not really mistakes) along the way.You're a great craftsman and furniture designer.Keep up a good work

I'm pretty sure that drawer boxes are the only occasion in woodworking where not having enough is better than having too much. It's a beautiful piece and the pain staking attention to detail really does pay off, even if there is plywood behind the door.

Thanks for the free course, excited to check it out once I get enough time to start a new project!

Thanks so much for all of your work and the videos. I love watching them.

Great build Shaun! Love the design and narrative that you have included, keeps it interesting. Love the video and the final piece, very cool!

Thanks for the course!!! Keep up the great work on both, the projects and videos !

I really like that you added the time break downs. I always wonder how long these things take you.

With such a beautiful piece like that and you being as honest about any flaws; such as the drawer box being narrower then planned and having exposed plywood edges; I would definitely trust you lol. I love the brass inlay and the dark stain on the recessed triangular section. Fantastic work once again Shaun.

This is some great stuff, a beautiful piece. Love the mixed materials, you are really letting each material shine in its own right. Also, thanks for the free course, I'm stoked to try it out.

It may be just a fancy pantry, but it’s the most beautiful fancy pantry I’ve ever seen! ♥️

Mind. Blown! I never knew there was more time to a project than what you put into a video. You are a trickster!

Lots of honesty in this video. Very impressive work and always enjoy the personality in your videos. Keep it up!

You are killing it Shaun, keep it up! (but only at the pace that makes you happy)

Awesome Shaun love watching your process

Love the armoire mate! Truly a work of art to be proud of.

Beautiful, as always. Really enjoying your solo videos. Best wishes!

Brilliant! The doors/drawer front and brass inlay are great, as are the sexy curvy sides. Thanks again!

Beautiful piece mate. Always a pleasure to watch your thoughtfully refined content. Bravo

I remember the first time I saw one of your videos. I just thought you were a couple of new-age yuppies trying to show us old fogies how to build things. 🤣 Soon thereafter, I started seeking out your videos. I follow very few woodworkers… Rob Cosman, Paul Sellers, and you. I don’t even follow that whispering guy! I guess I’m too deaf.. I dunno. 🤷🏻‍♂️ Anyways, I love your passion for design, I love learning new techniques I’ve never thought of before, and I truly love your sense of humor. I find your videos as entertaining as they are informative. So, from this old fart to you.. thanks for sharing your knowledge and your wit with us. It is thoroughly enjoyed, and highly appreciated. ☮️

Nice work on the fancy pantry Shaun! Thanks for sharing the build with us!👍💖😎JP

A beautiful creation. Thanks Shaun.

A true crafted project. Great design and detail.

Amazing build! You ,michael alm and pedulla are some of my favourite to watch on youtube. Are you going to do a podcast?? It would be great to listen to you guys while sanding 😅

I trust you Thank you for a great channel, yours and a few others' channels got me into woodworking as a hobby, I've really learned and gotten inspired by your videos

Hey Shaun, I really love your channel. Your commentary, your great humor, your thought process, and your descriptive talent is always very enjoyable to watch . Great job buddy!

I always enjoy your builds and videos, keep killing it

Thank you for making this video. Very enjoyable and educational

This guy is so amazing .. beautiful craftsmanship and videography skills!

Great piece, very unique, very Shaun Boyd. Love it.

You are hilarious; I chuckled throughout the video and loved the discussion about plywood at the beginning, faking it as you're making it. But the creativity and the beautiful result belie all your self-deprecation. This is a great project...and a great video.

Gorgeous work Shaun, I love it.

This is exactly why it's great to see you back on your own channel! Futuristic retro modern surfer chic style.. deeeewd I love it! 🤙

beautiful piece. well done!!!

I'd like to teach the world to sing, in perfect harmony! good choice of whistlin' tune!

Shaun your video commentary is hugely entertaining...and it always makes me laugh!!! Always love your work, and I always learn something too... Cheers from downunder!!!

the explanations are the main reason I tune in, its super helpful for an amateur like me 😁

As soon as I saw the thumbnail I was wondering how you would lay on it. lol Great video, beautiful project! Thanks for sharing!!

Oh man I missed that song, and the wave of good feelings as it hits alongside the glamour shots. Beautiful work, Shaun

Original, beautiful, practical. What more could you ask? Well done, Stewart, south west Australia.

Great video! Great piece! You are truly an artist

Great job, I especially like the brass inlay.

Brilliant piece, awesome video!

Beautiful Piece 👋. And a very entertaining enjoyable watch. Subscribed 👍

That was a really nice cabinet. I enjoy your videos.

The song. “I’d like to teach the world to sing”. Keep up the great work.

beautiful and inspiring, thanks again Shaun

Good to see you back in the shop.

Nicely done Shaun, it turned out great! I always find it interesting when someone is really good at something, how they can make it look easy. There is nothing easy about woodworking, and there was definitely nothing easy about this build. 👍

excellent video , awesome projects , funny and learning voice over....gimme more thx

something really neat out of scrap. Thanks for the great video

Oh man, you did a fantastic job!👍🏻👌🏻

First time watching your videos- really like the detail, being candid, and hearing your thought process. And BTW, I know the song!

Man there is nothing like some good old classic Shaun Boyd design!!

Excellent food cabinet! I bought an armoire a few years ago to store food as my kitchen had very few cupboards. Some folks thought it was brilliant, others thought it was silly, and yet others wanted to know if that where the cookies and chips were. I love your videos. Keep ‘em coming!

You had me at fast coffee table a long while ago brother. I'm always been overly Stoked to see your videos but not enough really. I really do appreciate the effort you go into with making these videos and also the woodcraft. My friends have been amped over the tables I've made for them learning from these videos. Too be honest it's hard to say how appreciated I am of your over needlessly indicated building process can be lol 😆

So good to get the Boyd/4 Eyes monthly hit...didn't realise how much i'd been jonesing! Inspirational as ever...love it - and great to see the Chris Cameo. Love ur work, Mate. Thank you!

Excellent. I love working with plywood especially for the stability factor :)

LOL! Hell yes! I gotta tell you that's my favorite music....EVER! By the way Spock wants his pantry back.

I am in love with this .. "piece". Wow. And, TBH - I quite enjoyed your presentation.

The song you're whistling. "I'd Like to Teach the World to Sing" is a pop song that originated as the jingle "True Love and Apple Pie", by British hit songwriters Roger Cook and Roger Greenaway, and sung by Susan Shirley

I was asking myself “how is he going to lay down on this one” 🤔 and sure enough you figured it out 😂 Great job man! It looks awesome and I love the way you added the brass inlays 👏🏽

Fantastic work, amazing craftsmanship sir.

I'd like to teach the world to ...... Damn Shaun, it's stuck in my head.

This is the second time I watch this video!!! I just wanna thank you for it because it just gave me a few ideas for a fish tank stand that I'm building as a silent auction item for a little girl who has stage 4 neuroblastoma and is beginning treatments. Thank you for the inspiration!!!

Nothing beats waking up early on a Saturday, and finding a new SBMT video to watch.

I love your sense of humor!

Fancy pantstry got me good. Hahaha. That’s gold. Also, glad you still got a lay down shot even though it’s a tall piece.

That was fantastic, first video of yours I’ve seen. I’m hooked, just subscribed. Thanks a lot, Great video !

Great Piece!!

Absolutely stunning..!!

great stuff!

very nice shaun

Loving the plum continuity!

As someone who follows a similar build path, it helps to think of things in quarters: 1/4 into CAD, 1/4 into milling, 1/4 into jointing, 1/4 into finishing. In your case, an extra 1/4 into video/editing. The time it takes is what it takes. The one question I have: how do you avoid feeling like you've got to devalue your labor to make a living? the ROI on time spent vs what you can charge always seems like 15-20$/hr in my case.

Looks fantastic.

Great job as always. Don't know if it's entertaining, but sharing the decision making progress is important. It's always the most stressful part of the job and, at times, it seems to be more important than the "doing." Thanks again for sharing!

the world need more people like you! :)

finally! i think i’ve checked your page every day since your last video. awesome job!

You have done it again. Taken something simple to something extraordinary.

Very cool piece. Inspired.

i like the stuff you guys create ....

Nice whistling. I'd like to buy the world a Coke was a great commercial and catchy song. Great build. I love your videos!

Love the work

Viewing from Germany, and I can confidently say ... "Das ist ein Kuchenshrank!" (Which is fancy for ... kitchen cabinet). ;)

Fantastic piece 👌

I love it!

Nice job Shaun and welcome back to your channel

It’s very cool! You are a great master!

I would actually love to see you go through the raw process of designing a woodworking project in fusion 360 (on like a secondary channel). I learned 360 for 3d printing, and ive found the headspace for modifying flat stock totally different from a additive manufacturing approach, and just watching the way someone actually uses the tool would help so much

That looks great man. You have a good eye for design

Nice ‘laying on the piece’ shot. I think about this a lot. I personally think the best pieces out there elevate their material, I kind of think about how David Smith’s (and other minimalist artist’s) sculptures got flack for using “cheap” material like rebar and concrete, instead of marble. They used industrial materials that were at the time, looked at, as ‘below’ fine art. But they elevated the material, and in doing so showed us a new view of beauty. I think plywood is sort of similar, it’s a fantastic invention, having the grain criss cross to intensely improve stability, and personally I love it when a good piece of furniture can elevate that and celebrate it rather than hide it. Plywood does have some serious short comings though, the lamination is vulnerable when the edges are exposed, especially if it’s not the highest quality plywood with a thick top layer of veneer. Showing materials weaknesses can be beautiful if controlled, especially as art, but as a functional piece of furniture… not so great, in that way adding edge banding on the front reads to me as a practical measure and a necessity for function. I make a lot of cnc’d sculptures out of plywood, and have you ever tried cnc routing a pocket that’s sizeable and at a partial depth? Like the cut out in your piece if it was all made of 1 single sheet as opposed to two layers. It makes a surprisingly interesting visual moment, true sometimes you run into voids or biscuits that aren’t as pretty, but if you’re using Baltic birch or something it’s actually less common then you’d expect. Idk try it some time on a piece of scrap, it looks cool, and is one way I like to acknowledge the material when it fits the design, could be a fun technique to try :) Beautiful piece as always!

Sehr schöne Arbeit - Respekt!

I have a miter saw....because I bought it in about 2000...but very rarely use it an generally only for "construction" type work. Not really needed for my woodworking with a sliding table saw and the CNC. :). Great project!!! And not putting effort into covering the edges of plywood where they will not actually be seen is a very good point.