SHE'S ALL BETTER ZX636 FUEL PUMP TIPS AND TRICKS
Рет қаралды 55,567
7 жыл бұрынWalking you guys through how I fixed my Kawasaki Ninja ZX636 fuel issues. This tutorial applies to the 2007-2017 Kawasaki Ninja ZX6R/636 fuel pumps. The pump may be identical to other Kawasaki Ninja models. Check on Bike Bandits.com or with a dealer to confirm.
I hope this video helps you guys out.
Thanks for watching.
****SUBSCRIBE FOR MORE TO COME ****
SUPPORT THE CHANNEL BY PICKING UP SOME MERCHANDISE
www.TonyStunts.com/Shop
****FOLLOW ME****
/ tonycarbajal
/ tcstunts
www.Twitter.com
Sponsors:
www.RideICON.com
www.Rokform.com
www.AvonMoto.com
www.ImpaktechUSA.com
www.TwoBros.com
Http://www.ODIGrips.com
Keywords:
Kawasaki Ninja ZX636, ZX6r, Fuel Pump, How To, Maintenance, Sportbike, Assembly, troubleshooting, Fix, Tutorial, Ninja, Wrenching, Garage, Ride, Motorcycles
@pimpedoutstereos9747 7 жыл бұрын
I don't plan on cleaning out my fuel pump but it was nice to see how it's done, thank you for making this easy to follow tutorial
@stevenchavez7342 7 жыл бұрын
hey Tony thanks for taking the time and doing these how to's videos for us we all appreciate it
@BJJSubArtist 7 жыл бұрын
Awesome Tony, something I can definitely make use of. Thank you and keep up the great videos!
@2222REALONE 7 жыл бұрын
awsome. my buddies bike kept cutting out after couple min of riding. Sure enough filter was caked with crap. this video helped tremendously. thanks again and ride safe.
@rey32987 6 жыл бұрын
Thank you so much your video helping me out alot. my ZX14 is running beautiful thank you
@HOOLIGANfilmz 6 жыл бұрын
Very nice. I'll try that. Thanks Tony!
@Isadeno 7 жыл бұрын
More of this! really good explainations and not to long of a video. perfect
@meh6953 6 жыл бұрын
Thank you Tony! The video taught me alot.
@mechanicchip486 7 жыл бұрын
Thx for the tips tony!
@PureSoundAddiction 7 жыл бұрын
Someone, anyone, please give this man 100k subs!
@ItZFlipz 7 жыл бұрын
This guy is better then every motorvlogger, skill wise he should have a lot more subscribers I agree.
@PureSoundAddiction 7 жыл бұрын
FLEPZ THE EDITOR true that. He can actually fix his bikes to, unlike the rest of us who run to the dealerships like pussys XD
@ItZFlipz 7 жыл бұрын
JR&R fuck wasn't even thinking about that haha its true
@Taco_-cn7um 7 жыл бұрын
JR&R
@MannyMoto 7 жыл бұрын
I miss my zx6r😖 great video brotha!
@DMoots 5 жыл бұрын
Great video, thanks for posting!
@tonytyndal5517 5 ай бұрын
Thanks for the video, I was scratching my head. This really helped.
@George241312 3 жыл бұрын
Just did this to my 13 zx6r and it was gunked up with some flakes of the internal paint of the tank thank you :) better idle on startup now
@powamoto 2 жыл бұрын
Needed this thanks fam 🙏🙌💚love from Miami FL
@N4styMedia 7 жыл бұрын
Lit i dont know how you are so low on subs. Great work man keep not crashing!
@d.fresh.750 7 жыл бұрын
Nice one! Haven't had to do this yet, but it definitely looks like a doable job. Probably more of a hassle getting the tank off, than actually cleaning the pump! lol
@motorizedmisfit-artist8535 7 жыл бұрын
Love it bro!
@AdamSVT 7 жыл бұрын
very nicely done vid!
@AgentK_YT 7 жыл бұрын
Just saved me a trip to a crooked shop man ! Love you thanks so much! Letting the filter soak, super dirty glad I didn't have to empty out my pocket again
@TonyStunts1 7 жыл бұрын
+Superman DK hell yeah! Happy I can help out!👌🏼
@AgentK_YT 7 жыл бұрын
TonyStunts1 so I changed the fuel pump , the bike was sitting outside of a shop for 3 weeks while getting the clutch plates replaced , a week after I got it back it started to run like poop , I changed the fuel pump but it only fixed a little the idle on first gear still isn't powering after 4th gear is it the fuel injectors or could it be something else ? Would appreciate the help again
@brodiehimself 7 жыл бұрын
Always enjoy your videos, would be cool to get a detailed walk-around on one of your bikes with explanations for all the mods you've done to them.
@TonyStunts1 7 жыл бұрын
+nexusis18 I will be doing that really soon. Which one would you like to see? Sportbike/stunt bike?
@edawg8773 7 жыл бұрын
TonyStunts1 I'm getting nosy in the question but I think stunt bike will be pretty cool to see
@brodiehimself 7 жыл бұрын
It'd be cool to see a typical decked out stuntbike and maybe a sportsbike that you just ride around for fun just to see some modifications that you would recommend to the average non-stunt rider.
@jeremiahtoney7559 7 жыл бұрын
suuuup Toney
@onthethrottle9230 7 жыл бұрын
This was cool and informative
@sirmoney2762 4 жыл бұрын
Thank you brother it’s 2020 and my 2007 zx600 j left me stranded on highway bypassed the fuel pump to get home....and now will use your method to clean fuel pump
@abcdefghijklmnop9143 4 жыл бұрын
How did this work out for you? I have an 05 zx6r and the bike will cut out after riding for a bit. Bike will start back but will happen again after a little while. Possibly the fuel pump, but also hear with the 05 could be the ecu due to poor placement and high heat conta t from exhaust causing to burn out
@dijonconerly9604 7 жыл бұрын
ooo how happy I am to find this video
@jacobfisher3080 7 жыл бұрын
Dude you are more badass and more entertaining that do it with dan, in my opinion, you deserve the 500,000k subs
@edawg8773 7 жыл бұрын
Yay she's backkkkkk
@candelarioalvarez9848 7 жыл бұрын
Will you ever do a "how to wheelie" video? Love your content btw!!
@Bischlarbo69 7 жыл бұрын
this should be titled "Kawasaki ZX636 - FUEL PUMP FIX" it will bring in a lot of viewers from outside your viewer base who are just searching for a how-to for their own 636 Great video.
@tilto7800 7 жыл бұрын
This should be a good video
@KhaosMoto 7 жыл бұрын
me gusta looks really simple to clean it up... how long did you leave the tank drying and the parts you cleaned?
@motonosityraymond884 7 жыл бұрын
love your vids and how are u doing today
@Mountainbikeedgar 7 жыл бұрын
great video...
@luksrytv 7 жыл бұрын
I just got my first bike, a 1993 cbr600 f2 the only thing i need is a speedometer do you recommend any? Also love your videos your crazy but you're the best of few who do what you do
@shittywheelies7403 7 жыл бұрын
Think you could do a how to video for sitdown rolling burnouts and circles?
@craigeley5103 7 жыл бұрын
hi Tony. thanks for video very helpful. I'm fairly new to sports bike riding and I'm trying to learn the clutch control required for lifting the front wheel. what type of rev range is required? what's the best way to start as safe as possible? maybe a short video for us newbs would be helpful.
@craigeley5103 7 жыл бұрын
I forgot to mention I ride a zx636 2006 (first bike)
@spmcclung140 7 жыл бұрын
Do you only have Kawasexi's and Victory's? You should do a walk around of your bikes.
@testme504 7 жыл бұрын
Love your videos man. I am in the process of learning to wheelie. There are a few wheelie vids on YT but I think you could do a better job. I ride a 2009 750 gsxr. Keep up the great vids an hope to see a wheelie video in the future.
@UnknownProdrive 7 жыл бұрын
DMVrider Some pro tips on how to get started on simple stunts would be great.
@jjaygunz 7 жыл бұрын
bike is bad ass wish you had a 2003 636 video
@iluvgr8tdeals 4 жыл бұрын
Here is the part number for the fuel filter. Just $13 to $20. You can buy a new one instead of cleaning it. Kawasaki 49019-0013 Fuel Filter. Thanks for the video.
@jessefpv9217 2 жыл бұрын
Just found your channel bro. I've got a question. 05 zx10r was running fine shut it off went to fire it back up turns over but not firing. It was running great then all the sudden it's not firing. What would cause a sudden lose of fire. I've cleaned all the switches they all look good any ideas
@itzjordandoee4778 3 жыл бұрын
Was on my 05 zx6r today and during hard acceleration sometimes the fi light flashes and the whole bike chugs and jerks. It fixes it self after a roll off throttle or a few seconds. It has custom exhaust and no tune I think. Do u think that might be the problem? Or any other ideas ?
@sergiobarrios2972 7 жыл бұрын
got the fi light on can u do a video on that??
@UnknownProdrive 7 жыл бұрын
Tony would it be possible for you to do a how to stunt tips vlog. Just some simple easy stunts to start with kinda stuff. Wheelie, Stoppies, etc, on normal non modded bikes. Pro tips would be great, it would also be helpful with slow bike control.
@jackk_tvv 7 жыл бұрын
Tony, Whats your thoughts on Polaris Pullung out of Victory?
@elmst6775 7 жыл бұрын
perfect video
@ajgearin2496 4 жыл бұрын
Thank you! finally got my bike running smooth again!
@rafagas5150 3 жыл бұрын
I need help brotha..I’m a new rider and my bike started to sputter and blow smoke out the tail pipe and the front of the bike.it smells strong like gasoline.Any idea what it might be? Some dude said might be my valve cover gasket but I don’t think it’ll do this.im just not sure what way to go with this and do want to let go of my bike Thanks in advance
@TennesseeSniper 3 жыл бұрын
Thx🤘🏻
@flying-fijiantv6282 2 жыл бұрын
Would this way be compatible with an 05?
@chazfaller1857 5 жыл бұрын
How much of a concern is the residual water in the pump filter?
@searsvillep Жыл бұрын
Is it the same for a zx10 07 fuel pump ?
@ledev9942 3 жыл бұрын
What is that part called at frame 3:20? and where can i get it?
@JussBaze 7 жыл бұрын
Is this the same or similar for a zx10 2008
@kris125sx7 7 жыл бұрын
Hey tony what size bike would you recommend for a 16-18 years old that races a crf 250
@kris125sx7 7 жыл бұрын
Oh ya I race it in motocross
@cieuxAI 4 жыл бұрын
I've got a pretty unhappy zx6 too. I've used Lucas upper cylinder treatment with fuel injector cleaner. Used to seafoam. I'm done what you do in this video and even tried running without the fuel pump filter. I'm still starving for fuel anything over 8,000 and sometimes it's worse than that sometimes it doesn't want to run 3k RPM. The pump sound strong but I suppose you could be the punk but do you have any other ideas should I take off the fuel bar and look for a clogged somewhere? After I used to Lucas treatment and ran like brand-new so I know it's ability is there but something starving my engine for fuel
@aerynmaria 4 жыл бұрын
Many things on these bikes feel like fuel starvation.. check the workshop manual and you'll a list of things other than fuel/pumps it can be. I would be careful before tearing up the DFI system
@revlimit3993 7 жыл бұрын
For those thinking about doing this be careful with cleaning with brake clean as it will eat the O rings. Best to remove them while cleaning. Other than that great how to vid.
@TonyStunts1 7 жыл бұрын
Rev Limit yes great point. Sorry I missed that. A lot to pack into one tutorial I guess
@beefyslife3473 7 жыл бұрын
top man
@uainttheone 2 жыл бұрын
I have a 2008 ZX14...lives outside, has had the tank painted.. and can't get over 4,000 RPM... Top of speed 50 mph... I have like a 16th of throttle to use or it bogs out if I hold it all the way open it just starts loping.. been trying to figure out if it's fuel air or electrical..
@JayK-vv5ye Жыл бұрын
Yo I have that issue too, i have 2007 zx6r my mechanic replace my fuel pump with quantum it lasted a week later now it’s back to where it belongs still won’t get over 4K it was doing better for a week until it went back from the start
@motobro6702 7 жыл бұрын
how many bike do you own?
@ps3boss98 7 жыл бұрын
Damn, nice bike.
@j9260 7 жыл бұрын
How do you dent your tanks and keep the looking so good?
@TonyStunts1 7 жыл бұрын
+Jesus Christ they are fabricated into a purpose built Tank to my liking. A company called @GraveyardCustoms builds them. You can find him on Instagram
@lolsludge7880 7 жыл бұрын
how many bikes do u have
@kc.95 4 жыл бұрын
Make more videos like that pls
@aussiemotokid4054 7 жыл бұрын
Holy shit that intros lit
@tori3520 2 ай бұрын
Is there anyway to bleed out any air in the lines?
@TonyStunts1 Ай бұрын
@@tori3520 air in the fuel lines? Is it a fuel injected bike ?
@ericaranda3637 3 жыл бұрын
I’m getting fuel to my priming injectors, but the injectors are not spraying fuel. They have power to them.
@MBC-nt4yh 3 жыл бұрын
Replaced the fuel filter my 14 still runs like shit. Map sensor maybe? Help?
@landonjacobs1502 Жыл бұрын
Ever figure it out?
@gurrenridin 7 жыл бұрын
Mmmmm, dat paint job.
@rooseveltrainesjr7618 11 ай бұрын
I took my zx1400 09 to va Beach yesterday an about have way to the trip my beat start loosen power jumping now power would not go over 4000 rpm . I also noticed acid leak from battery. I was thinking my bike sit all winter. An it could be fuel pump issue. So I call my pops stay the night in va Beach. Because the bike has no power an next morning it doesn't start battery dead. But the new battery doesn't fix it . I will be tearing that fuel pump out an putting a new one in my self it easy to do. If that doesn't fix it I will put new spark plugs an coils
@thekidlife6897 5 жыл бұрын
My 2006 zx6r keeps bogging and dies after 20 mins of riding. Filled the tank and didn't have any issues. But with the gas half full it happened . It jerks and dies. Temp is 80c to 90c . Not hot enough for the fan to kick in. It does have the heat shield and insulator for the ecu . When i get done work and drive it home it starts right up and makes it home fine. Any insights ? Bike has 24k on it. Plugs and air filter changed. Supreme gas in it. Could it be fuel filter? Is that red framed bike an 06? I have read that 05 and 06 are different pumps to the 07?
@aerynmaria 4 жыл бұрын
07/08 pumps are different to the 04/05/06 pumps. Have you tried riding with your gas cap open ? Check your vent lines (overflow pipe and vent in the gas cap itself)
@thekidlife6897 4 жыл бұрын
@@aerynmaria turned out to be the ecu . Swapped the ecu and never happened anymore
@aerynmaria 4 жыл бұрын
@@thekidlife6897 glad to hear it bro.. these bikes can be a PIA to troubleshoot..seen guys replace $1500 on parts and still sitting with the same issue.. I'm busy taking my pump assembly apart as we speak 🙄 ride safe man 👍
@plugsbywheretheplugsbe4938 4 жыл бұрын
Starting to notice that no one ever shows the actual fuel line connection everyone seems to skip over that part.
@robertweeks7993 7 жыл бұрын
👌
@_droid 7 жыл бұрын
Kerosene works better for cleaning and is friendly to gasoline compatible parts.
@bostinaycock8316 7 жыл бұрын
you think this procedure is similar for a gsxr?
@johnfurey3953 7 жыл бұрын
Bostin Aycock I personally have no idea but the best way to learn is to try it. If anything is different it would be the taking apart of the pump. But there is bound to be similarities.
@mikeMcoa 4 жыл бұрын
Those kawi engineers thought they could run game on us
@takingoutthetrash1512 6 жыл бұрын
yo tighten your right control modular
@logicinthebox 7 жыл бұрын
Atta boy T, keep up the good product, Sub D pushing some other adrenalin junky, get pissed and go out and eat something with him.Peace
@MCON89 7 жыл бұрын
sweet videos man. that bike is sexy
@jonathanpare2881 7 жыл бұрын
hi
@Eric-yi4mz 7 жыл бұрын
sense you sound so much like BXD does that mean you look like him to?
@bobbb4453 7 жыл бұрын
What year is that bike? In the intro
@TonyStunts1 7 жыл бұрын
+BOB bb 2009
@bobbb4453 7 жыл бұрын
Thanks tony. Great video
@chrisw8794 7 жыл бұрын
How many bikes do you have Tony?
@TonyStunts1 7 жыл бұрын
+christian worner currently 8
@spmcclung140 7 жыл бұрын
0 too many
@coloradodirtbike5930 7 жыл бұрын
TonyStunts1 what is your favorite, i know that is a hard pick because they each handle different and feel different, where one is strong other may be weak or vice versa. But if you could only choose one go to favorite which do you think you would choose?
@spmcclung140 7 жыл бұрын
4:43 "and" in the backgroud?
@TonyStunts1 7 жыл бұрын
+Dave yeah I caught that. But I decided to let it go lol the internet in my area sucks and uploads take forever. I was just ready to move on to the next vid lol.
@ItachiRyu 6 жыл бұрын
Any chance this will work for a 2006 model? Or is it only 2007 and up?
@codymccoll3299 5 жыл бұрын
What about 03-04!!
@initiated9049 7 жыл бұрын
Sup
@russ02281990 7 жыл бұрын
so what's up now that victory has fucked off. have you approached any other companies?
@PureSoundAddiction 7 жыл бұрын
TonyStunts1 Would you mind if I made a, "best of motorcycles - tribute" for your channel? Might help bump up your subs a little bit more.
@TonyStunts1 7 жыл бұрын
+JR&R I don't mind at all. Just tag/give credit. There's plenty of good footage in my channel trailer. The problem with the internet these days is that we spend so much time and put forward so much effort to produce content only for Instagram accounts to steal it for their own benefit and never credit the rider. Quite frustrating otherwise I'm all about allowing my content to be used in a positive way
@PureSoundAddiction 7 жыл бұрын
TonyStunts1 alright cool man. I always give credit anyway. I'll provide a link to your channel and everything. Even a custom thumbnail which will be on my deviantart account for free if you wish to use it later. Thanks for the opportunity!
@dst-a-nen Жыл бұрын
Did the same, but bike won^t start.. it is just cranking, cranking, cranking
@TonyStunts1 Жыл бұрын
Sounds like you aren’t getting any power to the pump. Check fuses.
@dst-a-nen Жыл бұрын
@@TonyStunts1 At the end didn't push enough plastic parts when assembling, so there was no vacuum apparently in pump. I kind of slammed it to fit, and miracle it worked. Thanks for a good vid.
@scrumpttv9068 7 жыл бұрын
pin this if your an awesome stunter!
@viper0168 7 жыл бұрын
What 2003 Kawasaki ninja 636 tony ??!?!?
@TonyStunts1 7 жыл бұрын
+Viper 016 is that a question? Did I say 2003 in the vid by mistake?
@viper0168 7 жыл бұрын
TonyStunts1 no u said 2009 I said 2003 Kawasaki I like this bike lol 😂
@TonyStunts1 7 жыл бұрын
Viper 016 2003-2004 is a very popular bike . Unfortunately the fuel pumps on those bikes have are poorly designed. I was thinking about doing a how to video on replacing it with a newer pump like I did on BakerXDerek bike
@viper0168 7 жыл бұрын
TonyStunts1 oh lol 😂
@kealecarbajal4304 7 жыл бұрын
My dads name is tony Carbajal
@nanaarabuli684 5 жыл бұрын
Those fuel filters are so inexpensive you could changed it instead of washing(not worth it).If you want to wash it use a toothbrush and WD40 for better results!
@elmst6775 7 жыл бұрын
did all the steps now my bike won't prime wtf
@TonyStunts1 7 жыл бұрын
+Elm St re-connected your wires, plugged the pump plug back into the harness ? Flipped the switch? Just trying to cover the bases
@elmst6775 7 жыл бұрын
TonyStunts1 I've done over 5 times now and nothing cleaned the harness just in case and nothing. is there a possibility I some how crossed some wires and fried the pump relay I tested the voltage and I'm getting enough voltage once I turn the key it's supposed to mark opperating voltage for 3 seconds for the priming sequence but nothing I'm trying to find out if the ground wire went bad today which is the joint connector B but Idk exactly were it's located any ideas
@TonyStunts1 7 жыл бұрын
+Elm St did you cross any wires on the pump itself? Put the grounds back ? Those are critical. If you are sure you didn't put wires back wrong on the pump itself then check the fuses.
@elmst6775 7 жыл бұрын
TonyStunts1 I'm almost sure it's the relay box now but Idk what caused it I had it priming correctly but relized that I had forgot one of the small orings so I took it out again and once I put it back together it wouldn't prime I think at some point I touched it with something that was hot and messed up the relay there isn't a fuse for it in the fuse box
@elmst6775 7 жыл бұрын
I also read that if you damage the fuel level senor it can fk it up so I'm in the spot were Idk if to replace relay box or the entire pump assembly love your powder coated frame by the way
@gavinhirt6160 7 жыл бұрын
only good for fuel injection bikes show th tj shit for carbs lol
@TonyStunts1 7 жыл бұрын
+Gavin Hirt I would but I don't have any carbureted bikes. Everything is fuel injected these days
@lilsquid5405 7 жыл бұрын
do ppl stunt big bikes like 1300 hayabusa????? all i see is 600-1000's
@MannyMoto 7 жыл бұрын
big mel street fighters got down on a Hayabusa idk about lot stunting but they can get down with wheelies too 😂
@Mr0GL0C 7 жыл бұрын
way to heavy to stunt
@PureSoundAddiction 7 жыл бұрын
big mel back in the day I used to stunt busas
@lilsquid5405 7 жыл бұрын
dang like ik they are pretty big bike but cant u do some weight reduction im sure u can right?
@MannyMoto 7 жыл бұрын
big mel no it's just over kill in general
@2222REALONE 7 жыл бұрын
awsome. my buddies bike kept cutting out after couple min of riding. Sure enough filter was caked with crap. this video helped tremendously. thanks again and ride safe.
Jason Derulo
Рет қаралды 62 МЛН
Ăn Vặt Tuổi Thơ 2024
Рет қаралды 11 МЛН
Official Hasnat Gamer
Рет қаралды 2,6 МЛН
Братья автоподборщики
Рет қаралды 1,1 МЛН
MotodartTV
Рет қаралды 1,2 МЛН