5:44 As far as I know, the output terminals are potential-free. Therefore, some safety distance was provided, as you could see on the backside. Very good, if low voltage circuitry is switched with the output.

I recently installed the 1PM-Plus to monitor my dishwasher. Installation was difficult because my American house is wired with 12AWG wire. The Shellies don’t handle a wire that size in general, and this model specifically wouldn’t accept it at all. But I got creative and moved past the roadblock. Also, I had trouble with MQTT not sending the sensor values, so I instead used the CoIoT interface with Home Assistant. All is well now as it is working great and the dishwasher is well monitored.

I would be happy with some 'loudness equalization' .; and my neighbors too

Thank you Mat.

I love these thingies for my HA

Very nicely done. Thank you! Wondering if you have updated this with the new Shelly devices.

Thank you Matt. Re the switch only device, having a 4physical button option makes it much easier to use than the single button they had before. Sadly I don’t see the option to run those battery powered which will make them super handy free standing remote controls with 4buttons.

Absolutely amazing video. Just a small request for us non native-speakers. If possible in future videos, use overlays/annotations or what not to show numbers and model names when you mention them. It is sometimes very hard to understand/grasp those in the natural speed of your delivery Especially for people like me with problems understanding spoken numbers

I am so happy the switch plate doesn't have the LEDs. My family is super sensitive to the LED light pollution that most of these switches have. I think that they were listening to the audience.

for high current draw applications its not good if the L and N are going true the shelly to the consumetion unit (water heater, dryer etc), you need to use wago (or other terminal) or it will overheat, they say that on the fb support page

I have a few Shelly devices, and the MQTT and web hooks out of the box are really handy if you don't want to use the app. I haven't used any of the switches yet, but I might give the new range a try. Thanks for showing them

Another great video Mat, thanks. We’ve installed a number of 1PM Plus as part of a house rewire to monitor larger appliances. Some quality hardware (even our electrician liked them!) and after 3 months the power monitoring seems reliable and stable. Shelly have made some significant changes to their MQTT behaviour and interface in the new Plus series and like another commenter we’ve sadly found this much more challenging to get running. Seems there is so far limited guidance /examples from Shelly online so if you happen to have success with MQTT on these new devices (particularly power monitoring) we’d love to know how you managed it. Thanks.

Can I, with this device, control let's say an overhead light via a "regular 120v switch" and/or wireless? The picture on their product page shows the device sitting inside the outlet box. Does this really sit in the same box as the switch even when the req'd 8" of wiring tails are also present. I've not seen any DIY video that shows an actual in wall installation. Just wiring it on a workbench.

Fantastic video! I really appreciate the introduction to Shelly switches. Could you recommend a specific model that allows for light dimming? I'm interested in a switch that enables us to adjust brightness levels through the app. My plan is to retrofit these switches into the back boxes of my current dimmer switches to upgrade them to smart ones.

Is it possible to access and control the Shelly via a Web browser from a Laptop/Pc or it will only work via an Apple/Android mobile device?

would be nice to have an tutorial how to flash shelly plus versions with esp home via pins or OTA

Can you share your thoughts about the shelly blu gateway? I cannot decide which brand to go with, sonoff or shelly. Sonoff has more detailed information on the web where shelly lacks.

What I am still looking for if these devices also replace Shelly 1L (when no neutral is available)

Regarding the Shelly Plus 2PM, with the Shelly 2.5 you can configure it to use for a shutter to drive the L/R motor. That also seems possible with the Plus 2PM but is that shows up as 2 switches that is different from the 2.5. How would you configure it for shutters and have it run based on motor resistance?

Recently bought the Shelly plus 1 and have connected via mqtt but I can not find the mqqt commands/ topics to control it. I have been able to see some of the mqqt topics coming from it but they are only "status/switch:0" and "events/rpc" but cannot find the topics to send on/off commands

do u think this can handle monitoring a 1.5hp aircon

Evening mate.

It may have been designed for DIY but in some country's its illegal, for instance here in AUS

I can’t hear you and the music is too loud

The links are giving me an error (Misdirected request). I’m in the US if that helps.

Can I use these on my water heaters 3kw

Hi, i recently bought the Shelly plus 1 I use it in my store. The connection was easily. No issues at all. When I give orders with my mobile connected in the same network there's no problem. Shelly connection with cloud is ok. But.....when my phone connected with another network and try to connected with Shelly, the device is offline. I can't control it. The are working perfectly both only on the same network. I reboot it. I reset it. Nothing changed.....Any idea what's the issue?.....

BT means the possibility of adding BT presence sensing. Still gonna use custom firmware probably. 🤣