Shimano Ultegra R8000 Cable Installation Guide

Рет қаралды 20,995

3 жыл бұрын

Shimano Ultegra R8000 Cable Installation Guide If you find the videos helpful and would like to make a small donation to help support the channel you can do so here www.paypal.com/paypalme/freet...
Buy me a coffee
www.buymeacoffee.com/Freetocycle
Support the channel via the Patreon Page
/ freetocycle
Follow me on Instagram
freetocycle...
info@freetocycle.co.uk
Thanks for watching.

Пікірлер: 25

@NeutralGenericUser 3 жыл бұрын

A few weeks ago, I converted my bike to drop handlebars and used your videos for everything. Installing the R7020 levers, the hydraulic brake bleed, the shift cables, etc. Your videos are an incredible resource. Thank you so much for sharing your knowledge. All the effort you put into these videos, showing different vantage points and being really specific about everything is so appreciated. You have no idea how many videos I watched regarding the insertion of the shift cable where they didn't show how it went in like you did in this video. Mine was getting stuck on the shifter body plastic housing, and I thought that was good enough, but it wouldn't shift. Your videos saved me from hours of pain. Thanks again!

@theunabiker4133 2 жыл бұрын

I’ve watched a number of your how to videos, and want to say thank you bc you’ve been quite helpful. Very clear presentations, and easy to follow what’s been demonstrated. I just finished a bike build, and referred to your channel several times. Thanks!

@hampusdahl3572 3 жыл бұрын

What an amzing channel! FANTASTIC!! THANK YOU!

@XBKLYN 11 ай бұрын

Im a bit late to the party on this one but thank you for the guidance... I've happened across a new in box Ultegra groupset and this vid is key to my installation....I had no idea what those SP41 cable ends were for so its great that you included that detail.

@donatelloslappafello1108 3 ай бұрын

Thank you! You saved me a lot of trouble. I appreciate the instructions

@dickieblench5001 11 ай бұрын

Brilliant presentation

@rjacko7478 3 жыл бұрын

Keep them coming ...

@ThePhilvantwo 3 жыл бұрын

Great video!

@FatherGorgony 10 ай бұрын

Thanks, it is for right hand, but what about left, for frunt derailleur?

@davesamsung4545 3 жыл бұрын

Great advice. Do you know if the Ultegra R8000 shifters are compatible with Dura Ace 9000 calipers, front mech and chainset? Thanks.

@FreeToCycle 3 жыл бұрын

Yes they are fully compatible!

@davesamsung4545 3 жыл бұрын

@@FreeToCycle Thank you so much.

@sorinpetre1457 3 жыл бұрын

👍👍👍

@dpugh39 5 ай бұрын

Can you use these lever with cable activated disc brakes or are they just rim? Thank you

@FreeToCycle 5 ай бұрын

You can you use them with cable disc brakes!

@custombender8667 3 жыл бұрын

Good afternoon, sorry for the machine translation. I have a problem, the lids of the hydra reservoir are leaking around the perimeter of the r8020 and there is no brake power, the gum itself is intact, how to solve this problem ??? THANK YOU

@FreeToCycle 3 жыл бұрын

kzfaq.info/get/bejne/gq9pi6h7qq_aqn0.html

@dh7314 2 жыл бұрын

Great video. However my shifting is very hard (left shifter, front derailleur) it takes all my strength to shift it. I’ve replaced the cable twice and I’m totally baffled. Any tips? It’s fully integrated including handlebars.

@FreeToCycle 2 жыл бұрын

Either the outer cable needs replacing or the front derailleur needs lubricating! Remove the chain and manually move the derailleur in and out by hand whilst lubricating all the pivot points!

@dh7314 2 жыл бұрын

@@FreeToCycle thanks for replying. I spent hours on it today, removed and cleaned it, lubed it and no improvement. I may just replace it, compared to my other bike (6800 groupset) the spring is so much stiffer. I’m worried I’ll break the shifter it’s so stiff

@FreeToCycle 2 жыл бұрын

David it should'nt be that stiff are you sure the cable is runnig free inside the frame?

@dh7314 2 жыл бұрын

@@FreeToCycle it has a sheath internally, which hasn’t been changed, the cable feeds fine and only meets resistance at the bottom bracket area but once the cable emerges it seems to move in and out by the shifter ok. Only once connected to the derailleur it struggles to pull it.