Shipbreaker Heavy Cargo Javelin Guide

Shipbreaker Heavy Cargo Javelin Guide - Gameplay Tutorial

Рет қаралды 4,335

3 жыл бұрын

This new gameplay video of Hardspace Shipbreaker is Tutorial for Javelin Class Ship (Grade 6 difficulty) and guides you through the dismantling process of it.
My Twitch (streams happening regularly, follow me for notifications!): / justanic0n
My Patreon: / icongaming
Want to support me and my work? Buy me a coffee and enjoy my gratitude =)
www.buymeacoffee.com/9T1PeXW
Alternately, here is my PayPal-Account if you want to go a different route of support =)
www.paypal.com/cgi-bin/webscr...
Join my Discord, chat and miss no new episodes: / discord
And last but not least, check out my Facebook!: / justanicon

Пікірлер: 11

@maxstr 3 жыл бұрын

16:38 you can tell if it's pressurized if you point the cutter at a pressurized section, the letters DNGR appear on your target reticule.

@Ic0nGaming 3 жыл бұрын

Thanks for mentioning that one, I keep forgetting this once too often.

@ambassadorofreee3859 3 жыл бұрын

@@Ic0nGaming Also your structural scanner tells you if sections are pressurized or not, the green squares means that there is pressure inside and red ones mean no pressure.

@dotaaccount7560 2 жыл бұрын

after u flush the fuel u can burn off the attachment from the tank and the "processor / junction" for the fuel lines without blowing it up. Once that is done burn off the corners of the fuel pipes and pull the outer shell off like a sleeve as u did for the other parts. The fuel tank will be exposed and u can then send it safely to the barge. I always do it last as i cannot find a way to do it sooner

@TheDeadSource 3 жыл бұрын

Assuming you don't mess up with any of the structural suppots or cut points around the fuel tank, and you've flushed the fuel from the pipes, it's possible to just splitsaw directly through the middle of that big fuel junction. Of course, there is then the difficulty in trying to actually peel away all the other bits so you can get at the fuel tank to begin with without nicking it lightly with a piece of metal or nanocarbon, resulting in unintended ignition. Apparently space fuel is super unstable.

@paulkauphart9444 2 жыл бұрын

You can actually melt the support plate between the pipe and the nacelle and it will free the nacelle without having to cut through the pipe.

@SUPERPETRo77 2 жыл бұрын

In the new update you can get 95% without getting the fuel tank, also it's been changed so the split saw doesn't cut through those hardened points between nanocarbon and aluminum frame holding the fuel tank. Maybe my saw needs the level 21 upgrade? The short section of pipe between the junction and the large fuel tank can be melted with the Stinger after the line is flushed to separate the tank from the pipes, but it will still be hard attached to the aluminum frame. I have no clue how to remove it from the aluminum frame.

@killman369547 3 жыл бұрын

The only problem i seem to have with heavy cargo javelins is the huge fuel tank in the middle of the ship. It is so difficult to get that out because you have to laser cut literally an inch or two away from it and if your splitsaw or stinger touches it for even a moment..... kaboom.

@Ic0nGaming 3 жыл бұрын

Yeah, I personally hope these receive a bit of a rework in future versions. Right now it's more of a bother than anything else - the tank isn't even that extremely valuable.