ShopSabre CNC - Cutting a Solid Surface Countertop

Рет қаралды 2,842

4 ай бұрын

In our latest video CNC Shawn cuts a solid surface countertop to finish off the frameless cabinets.
Checkout all of our equipment at www.ShopSabre.com
Follow Us on Facebook: / shopsabre
Follow Us on Instagram: / shopsabre
Please Like and Subscribe to our KZfaq Channel! Stay tuned for more CNC router and CNC plasma cutting machine tutorials, diy projects, builds and more. We feature cutting in different materials such as wood, plastic, aluminum and other various steels.
For over 20 years, ShopSabre CNC has provided businesses and hobbyists with the best CNC machines at the best value. By focusing on unbeatable customer service and high-quality products built in the USA, we’ve grown from a single machine built at home to one of the most trusted CNC machine manufacturers in the country.
Since building our first machine two decades ago, we now have over 5,100 CNC routers, plasma, and laser engraving machines in a wide variety of industries in over 30 countries. Our success is a result of our commitment to developing a better way to build CNC machines and support our customers.
ShopSabre CNC
www.ShopSabre.com
21673 Cedar Ave, Lakeville, MN 55044
800-493-6021

Пікірлер: 16

@lhfixtures2742 5 күн бұрын

As a countertop fabricator , I have to say there were some short cuts that were done for video purposes, but all and all it was a good demo of what a quality CNC can do. In our shop we would have taken both countertops up to polish or near polish, then set them and seamed in the field. And trust me a black solid surface takes a lot of polishing time to hide the sanding lines. What I want to see is the CNC with a sanding and polishing tool and it do the manual labor of that process. As per the need for a splint backer, you can do this, but we typically use a full solid melamine sub top and don't have issues with the seam. Now a seam in the corner isn't the best thing. If the width of the counter is say less then 30 inch wide you could cut an L shape and get out past the inside 90 corner. This makes the finishing of the edge in the field easier and moves the seam line to a better spot that is thought to have less stress. I guess it might be under less stress, but we have made and installed 100s of tops seamed basically the same way with nearly no issues. Most issues are because these are counter tops, not chairs or scaffolds.

@Kirbywinson 4 ай бұрын

Good video

@shopsabre 3 ай бұрын

Thanks

@user-gl7gm8mj5j 4 ай бұрын

Did Mozaik calculate the miter folds? I’m doing a similar shape on a job right now, so this is timely.

@shopsabre 3 ай бұрын

We did the miter fold inside of Vcarve

@justinwaugh3644 4 ай бұрын

Looks great! Where can I purchase that style dust boot?

@shopsabre 3 ай бұрын

ShopSabre.com or call our parts department m-f 8am to 5pm at 952-461-4570

@michaeldaniel7012 4 ай бұрын

Did they change the standards of solid surface fabrication? Mistake 1 seam in the corner mistake 2 the seam not backed up with a piece under the seam

@bradhasecuster3536 4 ай бұрын

I haven't seen a new fab book for years but I know a lot of shops are doing it this way. If that seam is in that location in a home in new construction it won't make it past the first season change

@shopsabre 3 ай бұрын

This was something we did in our own shop for a desk we made… the main focus for us was to showcase the machine and prove that our machines can do the cutting. We can appreciate your expertise and experience.