Should This Be The 6x6 Off-Road Cab?!
Рет қаралды 717,920
11 күн бұрынSo I got to Build The Off-Road 6x6, But lots of Improvements
Download my FREE app at www.morrstuff.com
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
They Lied To You! Not An Off-Road Jeep...
• They Lied To You! Not ...
This Toyota Needs More Than A Rescue!
• This Toyota Needs More...
I Can't Believe I Wrecked The Off-Road 6x6!
• I Can’t Believe I Wrec...
This Rescue Got Too Dangerous!
• This Rescue Got Too Da...
No One In California Would Rescue This Jeep
• No One In California W...
I've NEVER Seen This BEFORE!
• I've NEVER Seen This B...
This Jeep Needs More Than A Rescue!
• This Jeep Needs More T...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffroadrecovery.com/
Matt’s Straps, how we tie down our vehicles
mattsoffroadrecovery.com/coll...
Matt's Tools: Tool Burrito
mattsoffroadrecovery.com/prod...
Arcdroid CNC: arcdroidcnc.com/?aff=19
Check out the Miller Multimatic 220:
www.millerwelds.com/equipment...
Check out the Miller Arcstation:
www.millerwelds.com/accessori...
10% Off Discounts with our Friends: Use Promo Code MORR
Rock Slide Engineering
rockslideengineering.com
Barnes 4WD
www.barnes4wd.com
Yankum Ropes
yankum.com/
Rock Slide Engineering
rockslideengineering.com/
Flog Industries
flogindustries.com/
Yukon Gear & Axle
www.yukongear.com/
Full Throttle Battery
fullriverbattery.com/battery-...
Rugged Radio
www.ruggedradios.com:
Golen Engines: Use the code MORR for $200 off at golenengineservice.com
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Follow us on Facebook!
/ mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!
This video contains a paid advertisement
@JT_70 9 күн бұрын
This comment is unrelated to the video but relates to Matt. When we were traveling in Utah recently, we stopped at Maverik in Hurricane to get one of Matt’s favorite “Victory” pies (or JJ’s Bakery pies). Then, every time we filled up at a Maverik in Utah I got another one…and another. Today for Father’s Day my sweet wife gave me a dozen assorted Victory pies! Every flavor. Since we live over 1,600 miles from Hurricane, she ordered them. I’ll be sharing them with the family today and thinking of Matt.
@T_bone 9 күн бұрын
Gay.
@kokobanana1824 9 күн бұрын
@@T_bonethis isn’t that channel “t_bone”
@Bill_from_Nantucket137 9 күн бұрын
@@kokobanana1824 don't worry he's talking about himself
@mikefoehr235 9 күн бұрын
@@T_bone yes you are flaming fruit cake
@mrfattypancakes 9 күн бұрын
Happy father's day! 🎉 Be one of the good ones 💪
@southerndualsport3827 9 күн бұрын
Watching today for my Dad Tom who we lost just a week ago😢 he absolutely loved your channel guys, we bought him merch and he wore it proudly. Happy fathers day to every dad out there! Thanks for a great show Matt and crew!
@macsloan58 9 күн бұрын
Thanks for the Father’s Day wishes.
@hgj2019 9 күн бұрын
Sorry for your loss SDS. I’ve been through many father’s days without my dad. It is never easy. Of course, we always miss them more when they were great dads, as it sounds like yours was. Happy Father’s Day! Keep the memory of a great day strong and fresh. I still miss my dad every day, especially today! 😢
@southerndualsport3827 9 күн бұрын
@@hgj2019 thank you so much it's been difficult because we live far from him so I didn't get to really say goodbye because he went downhill very quickly. Luckily I did get to tell him I loved him on the phone a couple weeks before his Dementia really hit hard. 😮💨
@Marcelmopartruckguy 9 күн бұрын
@@hgj2019well said-been 6 years and i think about him everyday-always good memories
@hgj2019 9 күн бұрын
@@southerndualsport3827 if it helps, sometimes being right there is pretty hard too. My dad was in ICU after a cardiac surgery. Two weeks to the day after he and I worked on a home improvement project all day I watched him pass. Nothing I could do but be there. Intubated for a respirator he couldn’t even speak. He was the kind of guy who always had some wisdom to share. I wanted desperately to “save” him but I was helpless. He was 68. I turned 69 this year. Just remember your times together with love. Sometimes even if we are within reach they are still lost.
@marcfiore4319 9 күн бұрын
When I first started watching this channel (back when Hector was a pup), I found myself talking to the screen, saying things like, “WHAT!?”, “WHY-Y-Y-Y (sob) WHY-Y-Y”, and “no, don’t do that…NO!!! DON’T DO THAT!!!”. Now, I just sit here with a bemused smile on my face, secure in the knowledge that the result will be 11% better than I thought, and very, very, VERY glad that I never had to train Matt as an aircraft mechanic!
@sumosteve665 8 күн бұрын
Jake the battery charger..... that fits!! He 's a heck of an amazing addition to the Team. He can literally do anything he's told AND do it with a smile. I really like that guys energy.
@rickgifford1016 9 күн бұрын
I do believe the correct vernacular for something between "press fit" and "slip fit"...... would be "struggle fit'. That is an advanced automotive technical term.
@nerfherder4284 9 күн бұрын
That is actually hilarious, I need to remember that😂
@procatprocat9647 9 күн бұрын
There are actually 3 categories of fit: Clearance, transition and interference. That's the formal terminology. I like your joke though
@superchiefusn5601 9 күн бұрын
I do enjoy when Matt chit chats with us about what is going on and what the shop is doing and why. Happy Father's Day all!
@dhag72 9 күн бұрын
Jake is a real life hypeman and im all for it. Hes also a hard worker, and hes down for anything. Hes a keeper. We like Jake. Jake is good 👍
@Flysimware 7 күн бұрын
I think Jake is going to be a great long term member of the family. So cool you guys made the sauce shirt.
@jimalvarez2731 9 күн бұрын
SERVICE TRUCK! You should use that old cabover to build an off-road service truck as companion to the off-road wrencher. Put on a service bed with doors and a boom crane. Add a second row of seats for the crew. It could be set up for trailside repairs!
@peterwaugh9416 9 күн бұрын
Make it a FOOD TRUCK
@Tilly7731 9 күн бұрын
How often have you run out of gas? Perhaps an off-road Fuel Truck? Or a water Buffalo?
@nerfherder4284 9 күн бұрын
Rhett should convert it to an overlander 😂
@Bryanja81 9 күн бұрын
I like the service truck idea, but I also like the idea of building it like one of those Tatra off road rigs.
@OzarkTroutBum 9 күн бұрын
@@peterwaugh9416 Service truck with a food prep area. My buddy worked as service tech for paving crews and had a grill and fridge on his.
@Sebastopolmark 9 күн бұрын
After watching for years now, we have seen "the crew" change but there's ALWAYS been people who fit in, learn and contribute to the channel. The reason is Matt, Jamie and a small town. Treat people like human beings, respect people like human beings and they will prosper. Thanks Matt, Jamie and the boys! !! !!! AND I am always amazed at the Keyboard Engineers who know EVERYTHING.
@nerfherder4284 9 күн бұрын
Yeah, Matt seems like a good boss to me 👍🏻
@ellwoodwolf 9 күн бұрын
I just think about recoveries.... Show up to work on time and then work until it's done, forget plans after work... That's gotta suck
@61rampy65 9 күн бұрын
@@ellwoodwolf That's the way it works with a 24 hr towing company.
@ztwntyn8 9 күн бұрын
I bet they go to church together. Really wholesome people always 👊🏻
@HickSquatch 9 күн бұрын
Oh yes, the shop is TINY for the work that comes out of it!! I was there when the wrecker was in progress and there was barely room to walk around it!! It’s also amazing the quality of work and the ambitious projects that come out of the tiny shop, with bare bones fabrication equipment and only the people we see on the video; well minus Rudy who has his own shop now (wicked cool!!) and my friend Robert, rest in peace brother. Very cool folks!!! No off-screen fabrication crew, just a couple excellent office ladies and of course the incomparable Ed. The MORR team ROCKS!! Miss Lizzy, but so cool that she’s growing her family and doing their own thing too. It would be awesome if she could swing by and give an update, and Rudy too.
@montanamountainman 8 күн бұрын
This rollback is going to be at least 11% better than the other one. Happy father's day Matt, and every other father over at MORR! Matt is the kind of father that every man "thinks" he is. Thanks for everything you share with us 🙏we appreciate you guys!
@cclngthr 9 күн бұрын
I am building a 53 white 3000 truck with a Holmes 750. It WAS a tandem axle water tanker. I actually like those cabs. The wrecker unit was in good condition but needs work. I am building a mechanical with hydraulic assist gearbox for the winches and hydraulic outrigger and boom extension (it is a extendable boom version). The truck will have a dual PTO system.
@aaronmeek6342 9 күн бұрын
The deck of the USMC MTVR, running on those axles, is right at 6 ft. It takes ladders or fork trucks to load most of everything. The wrecker based on that chassis is a tow behind style.
@jeremyspecce 6 күн бұрын
I was thinking the same thing, glad you knew the name of it because I wasn’t sure what to look up
@xXSoulxxFireXx 9 күн бұрын
I love how Matt interacts with the camera. Still feels like himself and not just trying to be a character on camera
@wildernesshermit 8 күн бұрын
I really enjoy how you've progressed over the years, expertise along with your equipment. The links you provide are much appreciated. These folks not only do amazing recovery work, they've built most of the equipment they use. An incredible group of people. Many thanks Matt.
@NetanelC20 9 күн бұрын
For so long I get so much energy and happiness from the bits Jake is on video but was too lazy and ungrateful to pick up the phone and just write thank you.. But not today! Thank you Jake.
@bryanoverton4675 9 күн бұрын
Love the “working in the shop”. Really enjoy Jake and Colby days on camera. Keep up the excellent work video peeps.
@jamesallion7648 7 күн бұрын
I really enjoyed Ed's commentary on the axle build. Doing quality control and keeping Matt on his toes!
@lonhoschar1943 9 күн бұрын
The "Spud TrucK is coming along pretty good. I love all the live narration of what you're doing and the banter between you and the crew. Very entertaining! Keep up the good work!!!
@CapablePimento 9 күн бұрын
Some of the questions you have to answer are painful to listen to. But you are a saint for keeping your patience up.
@opiealvin 9 күн бұрын
I love that Matt draws a very complicated power train design and just says, "It's gonna be fine.". That's confidence.
@ellwoodwolf 9 күн бұрын
Its because he's going to keep modifying it until he finally decides to go with a proven solution
@jaredlancaster4137 9 күн бұрын
@@ellwoodwolfthis is a proven solution. Many have done it before him with great success
@danielmanneback1762 9 күн бұрын
I worked at Sterling Axle for 17 years... I have total faith in everything you are doing and how you're doing it!!!
@ItzHerozzz 9 күн бұрын
Seeing how far Matt, his family, his business, and his channel has come is truly incredible! much love from MN and Happy Fathers Day everyone!
@jamestorrence9340 9 күн бұрын
I worked for a small trucking company in Eugene, Oregon after high school, washing their trucks and gofering. In 1973 they decided to convert their truck no. 1, an old White cabover without a sleeper (it had 1 about a million miles) from a flatbed into a mid-length wheelbase semi. They used an old school SAW to chop the frame. The saw blade, if memory serves, was about 4 feet long and massive sized, for a saw blade. It did a full back-and-forth motion in about 5 seconds. The mechanic had to stay right there and oil the blade frequently. It took perhaps a week to cut thru both frame rails.
@TotallyNotRedneckYall 7 күн бұрын
Woo, thank goodness for power tools! I wonder why they didn't just use a cutting torch?
@JThelen1031 9 күн бұрын
Every time I see the clawless hammer in a video, I think of Tom Tom.
@rogermccaslin5963 9 күн бұрын
I just watched Tom Tom put that double hammer Matt gifted him to use.
@elesjuan 9 күн бұрын
@@rogermccaslin5963 Lol was just wondering if Tom Tom found those yet
@Herpaderp10 6 күн бұрын
I remember when Tom Tom first joined (around the time Tucker and Trevor left), and I felt he was a bad replacement for Trevor's energy and charisma. Over time Tom Tom became one of my favorite crew members. I do still miss Trevor, but I miss Tom Tom equally. I know they have their own channels, but it's not the same without Matt's antics. Same with Lizzie. I understand it's selfish but I wish they were all still around!
@61rampy65 9 күн бұрын
Matt, the quality of filming, editing, and especially humor has risen steadily over the years. Today's episode was hilarious! Loved the switch to VHS format at 24:05! That flag that they made for you is really cool, can't wait to see it installed. Great video today!
@Mtelk 8 күн бұрын
I met Jake just before the off road games, he is a special individual! The kind of person you just enjoy being around.
@mvcollerjhb 9 күн бұрын
In South Africa we get 93 (inland 6000 foot above sea level) and 95 for coastal areas. We also used to get 98 octane for coastal areas, but since them removing the lead out of our fuel, that is no longer available. Back in the 60s and 70s, we got a sugar cane based fuel, 100 octane (Union Fuel), but it was expensive and you had to advance your ignition if you wanted to get the most out of the extra power. Most cities outside Durban only had about 3 or 4 Union Fuel fuel pumps.
@TommyB-nh4vx 9 күн бұрын
In Sweden we have 95 and 98.
@doug112244 9 күн бұрын
You have to be careful comparing octane ratings between countries because they are obtained using different procedures that produce different numbers.
@cobralyoner 9 күн бұрын
Jake is such a great addition to the channel
@CRneu 9 күн бұрын
Jake is the best. His attitude is great and he wants to learn. No better type of person to have around.
@mikewieggers3139 9 күн бұрын
the word Matt was looking for to describe Jake is effervescent. Such a great dude.
@beaushaw 9 күн бұрын
They should sell the sauce shirts and give Jake a cut. Do them for everyone "on Wednesdays we wear pink" etc.
@larrygomez5521 9 күн бұрын
I like Jake, but let's be real he will leave at any time just like every one else that have left
@glennmuir5617 9 күн бұрын
@@larrygomez5521 Are you still working the same job you had in your 20s? Edit: If so, have you aged beyond your 20s?
@1999Valkyrie 9 күн бұрын
That old White Cabover is Art Deco at its finest! It deserves a place in the fleet, for certain! I'd love to see it in a two-tone paint scheme, something that would make a vintage Packard or Pierce-Arrow automobile green with envy. Such as yellow and cream, which would stay true to your signature colors. Turn Robby loose on it and let him show off a bit!! And thanks!!
@joeydube2195 8 күн бұрын
I absolutely love seeing Ed in the videos. The way you all respect and include him is awesome.
@agros7026 9 күн бұрын
"Sauce Containment System"... I'm learning a lot of new tech jargon from Jake.
@Hinch55 9 күн бұрын
I love the "Days without sitting on a cactus" moment at 31:32, with Matt turning to the camera with that smile.
@xxBlazinBobxx 9 күн бұрын
Happy Father's Day to Matt and all the MORR Dads out there!
@theburtseoni 7 күн бұрын
That White Cab Over cab is too good to waste, I look forward to a build with it as the center piece! And perhaps those 3 huge AWD military surplus axles as the foundation for it? Can't wait to see it! And Jake has added so much to the channel, we need to figure out a way to bottle up some of his energy and sell it!
@zokushatech 9 күн бұрын
I think having the offset rear axle as the front rear, then the normal one as the rear rear would be a better arrangement than your diagram. The carrier bearing for the driveshaft would be right down the centerline and it would have to withstand a whole lot less articulation than if the offset axle is in the rear.
@CRneu 9 күн бұрын
would this complicate locating the transfer case and splitter? I think he's running into space constraints because of the frame.
@martinfreer3425 9 күн бұрын
Centre bearing on axel will be short lived ,
@zyamadeadborn1785 9 күн бұрын
@@CRneu nope, that'll just swap the driveshafts. Axles will stay in same places, just other arrangement of diffs.
@zyamadeadborn1785 9 күн бұрын
@zokushatech my thoughts exactly.
@evictioncarpentry2628 9 күн бұрын
Was thinking the same as he was drawing it
@mrblc882 9 күн бұрын
Little bit of context for fellow European watchers: EU and USA measure octane rating differently. There are two standards: RON and MON with similar test procedure, but different condition , MON having more demanding, resulting in lower ratings. EU uses RON and USA uses AKI which is basically average between RON and MON. 91 AKI ≈ 95 RON and 87 AKI ≈ 91 RON (which is in EU abandoned because of low demand since most EU engines have higher compression ratio and require 95 RON).
@marvindebot3264 9 күн бұрын
I can't believe they can't get 98 RON in Hurricane, it's at every servo in Australia with a select few selling 100 RON.
@jannikmeissner 9 күн бұрын
Thanks, that's super useful; I honestly thought the US just had worse fuel…
@hrothgar014 9 күн бұрын
As the Crystals would sing: EU RON MON MON…EU RON MON.
@bryduhbikeguy 9 күн бұрын
@@hrothgar014 Actually laughing. I had that in my head too ;)
@thephilosopher13 9 күн бұрын
@@marvindebot3264 we can get whatever octane we want, jet fuels and nitromethane too, it’s just not conveniently sold at every gas station.
@MurCurieux 9 күн бұрын
You rock Matt, Jake, and Colby.
@bruceleealmighty 9 күн бұрын
Always attempt to comment. Peaked curiosity on the White cabover. We all or some of us anyway know that if you had a Passthrough Dif you would lose power to wheel the moment the front dif went out. Having friends with destroyed lunges gives me a unique perspective on painting in enclosed and non-PPE jobs. Most, but not all my friends have spent at least one year in a body shop. The ones that were religious about PPE don't have lung issues. One only worked 6 months in a shop but is now dealing with all types of respiratory conditions. He looks back and can only wish he had been more cautious. All and all, still enjoy coming to this channel.
@kennethroe5376 9 күн бұрын
Matt, I drove an old Mack('74) that was 6x6. It may be helpful to look into that drivetrain. It worked well, and your chassis height would not be any higher than it is now
@Jimmypupkin 9 күн бұрын
If Matt’s videos have taught me one thing it’s if you can’t tie a knot tie a lot, thanks Matt!!
@Crayfish- 9 күн бұрын
@ 25:16 The dog Peanut " Is Exhausted " from all of his Overseer-ship work !
@jesusthesnowman 5 күн бұрын
Jake is learning quickly! Good job dude.
@everready19373 9 күн бұрын
The 11% segment was pretty funny. The "Nov: 28 1990" really nailed it.
@mikewilkey9431 9 күн бұрын
Still smiling😊
@nwsvndr 9 күн бұрын
Give us a time stamp, please...
@mikewilkey9431 9 күн бұрын
24:07
@keith2059 9 күн бұрын
Greetings Matt and Matt's Off Road Recovery family fans! Happy Father's Day!! Hope everyone has a wonderful Sunday and week!!
@joelhampton7157 7 күн бұрын
Not sure were you found Jake, but he might be the greatest hire ever. Helpful, energetic, eager to learn!
@danielreynolds1923 9 күн бұрын
Love the old school VHS editing bit! Just need it to be “tracking” to stay in focus. Thank you for being a great YT channel!!
@volvogt21 9 күн бұрын
Super impressed you understand what airing down achieves. Few people do.
@Kletke84 9 күн бұрын
Ed’s lookin good!
@BastrdMcQueen 9 күн бұрын
Matt said the axle's done, Ed said wait a minute there you still need to add this and that... Sharp and wise!
@markwintz6000 8 күн бұрын
Happy Fathers Day to us fathers . But anyway years ago like 40 I worked building grain trucks ,dump , and heavy reel trucks for phone and power companies. So we drilled alot of holes in frames , we all used what is called a board and chain to put down force on the drill . I think you fellas probably know what I'm talking about. They sure helped big time . maybe your plastic drills don't like that kind of abuse.
@JB50713 8 күн бұрын
Matt's vision and knowledge is pretty commendable.
@shivermetimber 9 күн бұрын
I like the conventional cab WAY more. I think that COE would be great for another project👍🏻
@Beandiptheredneck 9 күн бұрын
I laughed out loud when Jake cracked the mountain dew 😂 "what was that?" "I don't know" 😆
@ellwoodwolf 9 күн бұрын
The regular cab is soooo much better
@Insertnamehere662 8 күн бұрын
I know in America cabovers are a bit unusual and cool, but here in the UK there is nothing cooler than those big American longnoses (besides maybe a Scania T-cab)
@kevbev1524 9 күн бұрын
5thHappy Father's Day MATTMAN, Your the father figure to all of us out here on KZfaq land. Recovery's are what Fathers do.❤
@mikemichaud5578 8 күн бұрын
Matt you and your crew and of course Ed are to be considered national treasures. You guys are amazing and extremely knowledgeable and entertaining
@marcomaldonado169 7 күн бұрын
This is the channel that I actually see almost all the building of a build and actually progress and it feels like the build goes by quicker I love this channel
@Rick2367 9 күн бұрын
I love Jake! “Sauce Containment System” lol
@Drones_and_more 9 күн бұрын
Please buy a Mag drill Matt, it will save you so much sweat and tears lol
@dc3d14 7 күн бұрын
I love how you include Ed whenever he wants to be included! You and your show are what Americs needs more of!
@chuckieswickedgoodfab 8 күн бұрын
Jake is the best, dude literally cheers me up every time I see him
@TheRealStructurer 9 күн бұрын
I like these Q&A sessions mixed with construction 👍🏻
@Mr.Hatchet_ 9 күн бұрын
I love the blue cab its such an amazing truck!
@HappilyHomicidalHooligan 8 күн бұрын
I've never had the "Pleasure" of sitting on a cactus... The only place I could have done that was also the place where I learned why you shouldn't do it...I live in Southern Ontario, Cacti are not Native to the area (too cold and wet)... A friend of my Father had some Brain Cactus Plants and the first time I ever saw them, was also the time the Friend's new kitten decided to go exploring the Cacti...watching the kitten leap up onto the cactus and then INSTANTLY leap halfway across the room screaming like it was being burned alive taught me to treat the pokey-plants with caution... Yes, the kitten was fine, none of the cactus spines got stuck in it's paws and other than limping and meowing piteously for a few hours every time it's pads touched something, it took no damage...it also never went within 6 feet of the Cacti for the rest of it's life either... 😄😁😆😅😂🤣
@jasonwitt8161 8 күн бұрын
Matt you are a wonder to watch, I love the way you talk to and treat people, especially your boys, I hope you had an amazing Fathers day, keep being you, God bless you!
@cameronmiller8972 9 күн бұрын
Me an my youngest son of 6 watch your video's every night before bed, he wants me to take him riding with you I keep trying to tell him first that a long ways away from Michigan an two just because we watch your video's doesn't mean we can just go hang out. But keep up the video's we appreciate it
@theroadtosolitude 9 күн бұрын
Thanks Matt for having us! We appreciate you taking the time to meet us! We love Jake and it was super cool to see the build in person! Can't wait to see it all done!
@mademoisellekaya1438 9 күн бұрын
You made a stunning piece of art. It truly looks magnifique! 👌
@theroadtosolitude 9 күн бұрын
@@mademoisellekaya1438 Thank you so much!
@utahyork3338 9 күн бұрын
Very nice wall art! It will look sweet in the new shop!
@theroadtosolitude 8 күн бұрын
@@utahyork3338 Thank you so much!
@Bill-bv9ld 7 күн бұрын
OK WHAT THE HAY HAY!!!! You just blew my mind and I’m sure it hope millions of others! I never was thought or thought of an off road tire like that! Thank you! And yes Patagonians all the way!!!!
@bruceeberle8377 8 күн бұрын
Matt since you are keeping the blue color for the roll back - I think it would look great with reflective yellow stripes to match your work shirt. That would be MORRIFIC!
@davidbarnsley8486 9 күн бұрын
Matt couldn’t Robbie’s just panel beet the door back into shape
@mediocreman2 9 күн бұрын
Yeah a decent Body Shop should be able to do that pretty easily. No need to waste a good door.
@motivatedpeon 9 күн бұрын
That 1990's filter was hilarious. Spot on!
@nerfherder4284 9 күн бұрын
😂 SOOOO brought me back, I could almost feel the 10 Lbs on my shoulder 😂
@CaliBorn73 9 күн бұрын
I was dying 🤣
@jaguise826 9 күн бұрын
That gave me a good laugh.😂
@alfredocarpaneto5976 9 күн бұрын
You should do a fan collaboration project. When you said the crew was 7 years late it rang a bell. You probably could muster an awesome crew from your fanbase in Utah alone, a lot of us do our own work on projects and would jump at the chance, organize it and make it happen. If anyone can do it Matt can. Be great content too.
@aserta 7 күн бұрын
12:28 if you can't find a door, find a piece of metal that fits the dent, tack it in place, then pull it down with authority. In theory, if you match the vector, you'll undent it close enough for a panel beater action. That damage is pretty much fixable. Clean bend, nothing super mangled.
@kylegregory9355 9 күн бұрын
I like the double-driveshaft/offset differential idea because it's possible to break a driveshaft on one of the axles through accident or misuse, and you're still able to drive the other axle to get the vehicle out in theory. With the pass-through axle, there's just slightly less redundancy.
@mrblc882 9 күн бұрын
About holes in frame: you should avoid making them in stretch stressed parts of frame. That is bottom between axles and top on overhang part of frame.
@karlfrederick5731 5 күн бұрын
Film crew: Love the TBC stamp --- only us old guys have a clue. Thanks for the nod.
@johnmaskew 8 күн бұрын
The spud truck cab has to stay. It’s so cool. Especially in that colour. We don’t see anything like that in the uk. Can’t wait to see it in action but loving watching the build.
@RubenKelevra 9 күн бұрын
Why not make Unimog style steps on there? Just having a motorcycle style chain on both sides, so they can move forward and back, if they hit the ground, but you can step on them end they won't fold back (meaning sideways in vehicles terms) :)
@Baer1990 9 күн бұрын
To get rid of a long end of a strap without tying knots everywhere is to roll it up really short, reach through the middle, pull whatever is left between the roll and the ratchet through, and with that loop you just created, you put entirely around the roll of strap. I've driven a flatbed for some time and never had a problem
@jeraldlallen3555 9 күн бұрын
I miss the kids, but Matt makes every video enjoyable. Thanks for making me smile on a Sunday night.
@jeraldlallen3555 9 күн бұрын
Well shoot, I should have kept watching before commenting, all three came back, just missing Karter.
@SpineShank7 7 күн бұрын
It's a shame about the dent, but I'm glad the cab is staying the same and also staying blue. This truck is gonna look great!
@dubstronaut 9 күн бұрын
Something I've always enjoyed about your business and your channel is that you work with the kids and young adults from your area in so many different ways. Whether you've hired them directly as part of your crew, or if you're giving back to the community in some way that helps the kids. Reminds me of my own childhood, working at a restaurant owned by a guy with a couple kids in school. Most of his staff were high school kids or recent graduates. It was a helpful transition from school to the real working world. That's what you're doing for these kids, and i love it!
@macgyverm109r 9 күн бұрын
So for a fuel cell you could build it to look like a row of Jerry cans strapped to the headache rack. 11% kooler 😎
@popmarbles6980 9 күн бұрын
Matt, you have a little of everything to laugh at, what a fun time I had today. 😆🤣😂
@MrChrissy1r 7 күн бұрын
Great video as usual, thanks guys. As a master Carpenter and joiner retired, that must feel so weird using the hammer with the claws cut off. My hammers were all balanced so as to literally rock back and forth on the claws, that's how you tell a properly balanced hammer.
@mrfattypancakes 9 күн бұрын
Jake seems like a great employee. I love his engaged responses and enthusiasm! Is he one of Matt's sons 😅
@funkymedina2974 9 күн бұрын
No
@johnunsicker7440 9 күн бұрын
He was a a tow truck driver.
@dalemullins4562 9 күн бұрын
Ed is awesome! after quizing Matt on if he properly assembled that rear end he says....we'll ok then! lol
@jimandnena4 9 күн бұрын
I love seeing the declawed hammer still serving a purpose. Don't sweat the bent door, stuff happens.
@reallyswift 9 күн бұрын
That space between press fit and slip fit - Hammer Fit
@limbojunk 9 күн бұрын
It needs the most seats available to bring customer and crew out
@Quaid71 9 күн бұрын
The headache rack will certainly double as a roll bar if needed. Looks awesome!
@nebraskamalt6949 4 күн бұрын
Best cure for cactus thorns: need to be cool and dry, but don’t try to wash. Get in the AC, naked, and gently apply gorilla tape, and pull it off. Don’t reuse tape. After a few applications, apply tape and rub it on before you pull it off. After you get the easy thorns you can shower and use drawing salve. After you use salve you have to have to get clean before you use more tape.
@rickferrier3496 9 күн бұрын
Happy Father's Day I think the COE would make an excellent cab especially if you add to the back of the COE cab to fill it into the headache rack so then it would seat more people and look extremely unique.
@quantumss 9 күн бұрын
Jake is one cool guy. An asset to the channel. His smile cracks me up.
@marvincarter870 9 күн бұрын
Matt thanks for answering questions that people are asking. Happy Father's Day to all the Dad's out there! Lot's of work going on with the off road rollback and things {Matt's ideas} are coming to life and will be a great addition on this roll back. Great video and explanations!
@johnnydeville5701 8 күн бұрын
Well I can't relate to sitting on a cactus, but I can vouch for running into a cactus, when I was a kid! It also happened in the the Mojave desert (albeit in Yucca Valley, California)! Glad to hear Jake's cactus free for 2 weeks! I recall that it wasn't pleasant!
@dougdean3134 Күн бұрын
Nice to have the full team back in the shop
@tedsanft7420 9 күн бұрын
I gotta be honest, I was not a Jake fan, but over time he has grown on me and I really enjoy any segment he is in. Love his spirit of trying to make everything 11% more fun.
@funkymedina2974 9 күн бұрын
Same here. It took a while. Still working on Katelynn.
@bripslag 9 күн бұрын
@@funkymedina2974Lizzy set a high bar for Katelynn to try to reach. Over time, she's proven her skills in other areas, even though she's not the "ready for anything" tomboy Lizzy is. As Katelynn has become more comfortable on camera, she's slowly winning me over.
@SMFLEIS 9 күн бұрын
Not a fan of Katelynn
@thomasleonard9685 9 күн бұрын
Jake is ok. Not horrible. Katelynn is Katelyn
@bogiesholdtheweight 9 күн бұрын
An old style cab over Fire Engine cab would be a dream but any old cab over looks sweet in my eyes.
@steveclark4291 9 күн бұрын
Thank you Matt and crew for sharing this with me !
@ryanc3219 9 күн бұрын
A friend of mine(old hotroder/fabricator) swapped one of those White cabs onto a Nissan rollback frame. Turned out awesome and looked sweet. BUT it was a a LOT of work. And by the looks of it, you don't have all the original brackets, crossmembers etc. The pivot/tilt/torsion hinge was a lot of work on its own.
Gufee.medalin
Рет қаралды 5 МЛН
Лёня Пятница
Рет қаралды 8 МЛН