Great video Rick!! I've been using this for a while now... I wasn't to sure tho. Thanks for bringing it to light...

Great video. I will definitely follow your advice. It seems easy and effective. And it's cheaper than any other methods/products. Tks.

Love this idea! Saw it on another channel, but it isn't one I follow, so no trust factor. I have a lot of trust in you so will definitely be checking this out! Thanks! great content as always!

I'm with you! I believe the "reside behind" theory. I'm sticking with the magic eraser, and carbon fiber brush. Also "Last" makes a cleaner and a treatment available @ Music Direct. It figures I just bought a Jell one last week, oh well

great tip and i'm excited to try it. I have a stylus brush i got from the turntable manufacturer but still can get quite a build up of fibers over the year, and twice I've had to remove it and pick things off with tweezers and a magnifying glass. Hope this helps with that

I have used this product several years and it does the job. Here in Sweden it's called Stain Eraser. I got 4 of them in a package for 20 SEK at Dollar Store years ago.

I had tried the magic eraser before but didn't notice a difference over the brush. However with the view of the stylus through your digital microscope I will revisit using the magic eraser.

You keep on coming up with good videos! I've used blue tack as advocated by SoundSmith. There has been the question of whether it leaves a residue. A couple of months ago, I bought about 10 cheap styli off amazon, and want to do a fake stylus cleaning with blue tack, the Onslow thing, and anything else, then examine virgin stylus and "cleaned" styli under the my scanning electron microscope, and even to EDS/EDAX chemical analysis to check for any films. Haven't done it yet, might be a good "between the years" fun project. Stay tuned ... -- I like the Mr.Clean sponge. May also throw it under the SEM for the heck of it. Maybe with stylus embedded in it to see the scale.

I've used the Magic Eraser since I got my record player two years ago and it does a really good job

I have been using MoFi LP#9 stylus cleaner since 2006, because the store where I purchased my turntable threw it in. It is a tiny bottle, that does not list its volume. There is a brush attached to the bottle's twist off cap. If you search for images, you will see a black brush that is not attached to the bottle's twist off cap. So there is that brush, too. But the photos do not reveal the brush that is submersed in the goop. I am still on my first bottle, and it looks 95% full. It gets my stylus clean, and no harm has come to my stylus or my records. But it does have chemicals or some anti-human ingredients, because the label warns about keeping it out of your eyes and away from your mouth. It also warns to keep it away from fire, and that it could discolor some surfaces. But the label does not list what is in the soup.

I have the Huson Hi-Fi UV stylus cleaner and its incredible. I don't use it everytime. I use the magic eraser between records and the UV once or twice a week depending on usage.

I bought it in the Netherlands (because I live there). In the Netherlands you can bye it at the drugstore called Kruidvat, and it's only €0,79 for 2 blocks. They call it Wonderspons. And as you showed in your video it works perfect. Thanks for the good advice.

Crazy & very cool idea 😎

Just ordered the Magic Eraser, appreciate the tip Rick. Dropped the Onzow as well. Instead I use the Hudson HI-FI UV stylus cleaner (outstanding), a stylus brush and the AT607a stylus cleaner occasionally. Can't emphasize enough the importance of that digital microscope.

I used the Onzow too.....I think the 'breaking down' rumors and comments about leaving the residual gel on your stylus were mostly due to how they cleaned the gel. I noticed a trend of folks saying they used dishwashing fluids like Dawn to clean the gel. I believe that might have been breaking down the gel. So I used Woolite to clean it. Then I got to thinking 'Why should I even have to bother with this?' And truthfully, for the cost of the thing they should have better directions for cleaning it. So I put the stylus under like 500x magnification....I can go more but movement becomes an issue. Then I bought the brush and fluid from the GrooveWasher people. I don't remember if it's 'alcohol-free' in their literature, but they say it's safe. I don't smell any strong chemicals in it. I brush eight times, looking at the brush with a loup to see the dirt, if any, and remove it. Then under the microscope for the stylus. It does a stellar job. Yes, I did the Magic Eraser thing, but it didn't clean as well as the GrooveWasher product under the microscope. There are some expensive vibrating tools that imply they are ultrasonic but one at least I know isn't. I'm not going down that rabbit hole since the Groovewasher system works. The Magic Eraser is mildly abrasive too....something to consider and be concerned about with your stylus.

Great video! I’ve been using the magic eraser since the beginning of Covid when I bought my first turntable for my man cave (entry level U-Turn audio) and I love it. Works great for me. I now want to upgrade my turntable and keep the u-turn audio as a secondary TT for the bedroom. Any recommendations in the 500-700 dollar price range?

The Magic Eraser method works. I have been using this idea for a few years now, and I have always had good results.

I've been using these for years, and as long as i just dab it straight it a few times, and dont drag it around, it works wonders.

Would you tell mrs sponge bob not to swallow it?

I used to use a ME. I now use a Moongel damping pad. Does a better job than a ME in my experience. Moongel is used to dampen drum cymbals. Similar to the Onzow but you get a lifetime supply for under $10. Many audiophiles now use a Moongel pad.

Thank you for the trouble!

I personally use a thin slice of spam. You know, that can of mystery (meat?) that's been hidden at the rear of your shelf for years (you know it's been a long time when there are NO "use by" dates stamped anywhere on the can.) Anyway, I've been told that they used a binding agent in the product that also has the property of cleaning a record stylus sparkly clean! Just try and lower your needle only a "clear" area of the stuff, avoiding the chunks of whatever that stuff is. Just kidding! Yea, I think I'll go cut me a delicious slice of Mr Clean and............clean my stylus! Great video as always! Till next time!

Hmmmm. Very interesting. I never would have thought of this. I have a stylus brush, but I've never felt that it did a particularly good job. I've got these magic erasers around the house, so I'll slice one up and use it. They taste great with some pancake syrup too. 😂

Hi Rick , never heard of this one, but on your video I will give it a bash , I have been using what’s called “ the green stuff” which is basically sand paper to clean my stylus sounds friggin mad but Linn recommend it , and I have used it for many years without any diamonds falling off😢 Keep up these short insights into your musical world bud 👍 thanks Eddy

Yep Rick I use the Magic Eraser! Sometimes the simplest things can be the answer.

A quality stylus brush and appropriate fluid is still best.

Yes, the magic eraser works well, but the stylus has to be gently let down slowly into it, as you showed. Any extra stuff, a little blob of blue tac works, at least for me. If using a brush, just use it dry, and a couple drops of distilled water on it every once in a while, and gently brush it back to front. I personally wouldn’t use any cleaning liquids I don’t know the ingredients of, and have unfortunately lost a couple of styli that just fell out of the cantilever. This was years ago though, so lesson learned….

I've used it for awhile now, no issues on 3 stylus and it seems to be pretty effective. Just be careful when dipping it in, and only once every 20 hours or so.

From someone who has owned cartridges in the thousands of dollar range since the mid-eighties, the green sandpaper from Linn works. Don't f^@k with any fluids period!!!!!! BluTack and Magic erasers get the fluff off, but the baked-on sh!t( upwards of 350 degrees Fahrenheit), can only be removed with an aggressive approach. The diamond tips won't be affected, or damaged by the 3M product. They're tough. Never! And I mean never have I damaged a stylus on a cartridge with this method. PERIOD!!! Are you listening? It works. There are simply too many doofuses on KZfaq spouting, regurgitating, and blathering on about what they think works. Myself included. Kidding. I actually do know what I'm talking about.

My plate spins when I move my arm

Everyone laughs at this method....until they try it. Then,,,wow.