Your video is by far the best explanation on how to do this, with the best filming and not blocking the view of what you are doing. I have watched numerous videos and happy to say I FINALLY found one that I could actually see what the person was doing every step of the way with great detail. Fantastic job. I have bookmarked this for future reference and it will be my go to peep tying video. Thanks greatly for your hard work in putting this together.

My dude coming in hot with another solid ass video. I wish y’all had a shop in my neck of the woods.

Best instructional videos I’ve seen yet on the interwebs. Anxious to see some of your recent videos!

Hands down the best peep tie in video. Followed it step by step, and it’s solid no rotation. Thank you

What a great trick for back serving, Thanks!

Agree with everyone on this, dude wow. Best camera angle, best explanation, crushed it. Thanks!

very generous of you guys to show the world your tricks...thank you

I tried different methods from "famous" "professionals" on YT before and NONE worked. This is hands down the best method. 👍🏻👍🏻👍🏻

Thank you .... finally!!! For about 10 years I’ve had trouble with my peep sights sliding constantly adjusting after 100 shots !! I’ve been to several ships and they all tie the same way!! This is awesome! Can’t wait to try this out!!

Thank you for the detailed, straightforward and well shot video explaining how to tie in a peep sight. This was my first effort and by slowly following along with your video, I'm happy to report, it was a success. Keep up the great work, information output and educational videos, it's much appreciated.

I am a newbee and this is the first video I have seen that when I followed along with it my peep sight was not off and was rock solid. I am a target archer or a wanna be and will always use this method, thanks for sharing it.

Thanks for showing this method! Finally a knot easy enough for a dummy like me to follow!

🔴🌎🔵🐸 I had this method done to my bow and was going to attempt to do it to my new bow from just looking at how it was done. It is absolutely the most secure and beautiful way to do it, though I wouldn't have done it correctly. I am so glad I had subscribed to you and you just popped up this video before my peep arrived. So thankful for you sharing your secret master craft and offer a great detailed description.👍

Your video could not be better timed for me. I bought a bow a few weeks back and the shop that sold it to me did an adjustment that seemed very laxed to me. After watching your videos on tuning and signs that a bow is not properly adjusted, I now realise that my bow adjustment is all out of whack. I am redoing all the adjustments myself. I was just wondering about how to reinstall my peep sight and voilà! You just made a beautiful video about it. Your videos are by far the best ressource I have found. Keep them coming. Cheers!

Excellent video showing a great and yet simple way of securely tying in a peep. Great camera work, could see exactly what you were doing. Thanks man!

I’ve been trying to get my peep tight after watching several videos. This is by far the best method!!!! Thank you Thank you THANK YOU!

That's a sweet looking pep very smooth. I am very fussy with my bow.i know animals don't care what it like but I do.thank you

I’m a novice with no guidance except for KZfaq and internet searches. I’ve been doing okay but this video helped me lock in my peep. Prior to this it may as well have had a pogo stick under it…it’s locked in now.

Thank you for this video and the details. My peep is solid now and I am proud to have done it myself Thanks to your video quality and explaining.

Love this. Probably the best close up of this process. Could you do some more close ups like this of maybe some cam shimming on Mathews Hoyt and pse?

Thanks, We'll you just solved my peep twist problem. I have tied my peep in exactly as you demonstrated and it worked out perfect. If you every come to Western Australia for a holiday I'll buy you a beer or two.

Easy to follow. Solid set up. Thank you 👊🏼

Thank you

Thanks for the awesome video, Brother! I had a high shoulder shot on a nice bull last season that I never recovered. I was heart broken and blamed on rushed shot and blurry pins. I've had vision changes over the years causing pins to blur out. I don't hunt with Rx glasses, so was imperative I tie in a verifier to remain ethical. I've been buying bow tools over the years and teaching my self bow tech 'skills'. I don't like to be reliant on other people to work on my firearms or bows. That's just me, I like to be self-sufficient and be able work on my own stuff. Also, it's hard to find a technician when you're in the field, if you know what I mean. Your video was the 4th of 4 that I watched about serving a peep. I used your methods because it was concise, you're professional, it was well shot, and clean. I especially like the way you use one string to serve peep from top-to-bottom, alternating sides, with hunting applications in mind. My serving remains super tight and clean, the peep stayed straight, and "super secure", as you said. My pins are cleared up and I'm back on target! Thanks a lot, Man! Carry On!

Excellent explanation Thanks….

I’m just gonna say that’s badass! I had to pause and rewind 100 times but now my peep looks like a pro did it Thank you!

Excellent video, you have an ability to teach. Thnk u.

Really nice method of doing it. It’s obvious how secure it is and you’re right Very Clean. Thanks for the demo 😎🤟

By far one of YOUR best video's and thank you for the information!!!!!!

Thank you for this up close and great explanation of this process! Much appreciated!

Wow nice and clean...looks rock solid. Love your videos, of all on KZfaq, yours I like best. Keep up your great work

Had great success with this one first try. Thank You!

That is a different way of doing it than what I've seen where you loop under another loop to get the same results. I think I like your way better.

Great video I learned how to tie in my very first peep from this video and now I have it down. Thank you

I done the same thing here but I used two strands of serving and wrapped one down each side of the string and peep, the peep is basically served right into the string

The best video I believe to show how to tie my peep, so thank you so much. You are a lifesaver ToT

Start with a constrictor knot in the groove of the peep, than wrap the tails the same way you did.. It's even more secure 😉👍

Can you please do a video for tying in a peep for a target bow ? Absolutely love your videos ! Thanks for hard work and dedication to our sport 🎯

Great Video. I do mine a little differnet by backserving the finish. Another video recommended using a dot of superglue to give it a little more durability. You aren't just kiddin' about the change in Point of Impact. My serving broke and unraveled. The bow shot a perfect group exactly 6 inches high and 6 inches to the left.

excellent mate, best instructional archery related videos out there in my opinion. thanks from australia

Excellent, well taught. Greatly appreciated!

Nice thank you for sharing and nice clean job that is professional

BRAVO !! UN BELLISSIMO LAVORO !!

All you need is a double constrictor knot around the peep and it will not move.Do not serve up to the to the string where it splits the strands.It will put pressure on the triangle part and cause the string to twist the peep

I really love your info videos 😀 keep them coming 👍

I start mine on the peep with a constrictor knot and wrap away from the peep. I backserve the ends and don’t pinch the string together. 1.5 years shooting it and no rotation at all. I think pinching the string causes the rotation.

damn i may have to drive down to you so you can string my peep sight no one ive gone too has done it this good.

Thanks for this video!

you're doing gawds werk, fam.

Great video mate well done, keep up the great work 👍🏹🏹🏹

Thanks man! Good info as always

This is a nice way to do it but I do mine different and it is secure too. It is all personal preferences though. Tim Gillingham has a really nice way too.

nice way of doing it, i found an older video(from the guy that does the "infinity loop" video and used his method to tie in my peep(since that is the way i learned it first), it is similar to yours but taken to the "next level up": The entire peep section is served so you do not see any bowstring from the beginning of the serving to the end of the serving. will try it your way if i have to some string work. love your video's keep it up.

Literally same comment as below haha, I wish there was a shop this good in Melbourne, Australia. Guess I'll just have to do it myself.

You said there was a right hand spiral and that you should serve with the spiral, but that is definitely left hand spiral that you wrapped against.

Earned a sub from a first time archer thank you

Man thanks for your videos, they are great help, all the way to Spain ;) cheers!

Nice, best peep tie in walkthrough and info IMHO... 9.5 outta 10! -.5 for the blk serving on blk hoodie... 😉 btw What serving do you use?

Great video as always

Thank you for this

This is the first way I learned tying my peep. Never knew about the string rotation so thanks for the new tip! Great videos as always. Do you feel the color of the peep effects anything? I used to match them to my bow colors but have also heard certain colors reflect light differently and that black is the way to go.

Nice Video, very good info!!!

Are you the same company as The Bow Rack in Redding CA? I find your videos super informative. Can’t wait for the in depth content coming.

Well, we'll see if I can do it LOL And I did!!

Nice job thanks

Hi man, Great informative video... Can you please advise how can one tell whether your peep position is to high or to low? Does the position depend on how you like to anchor? Much appreciated...

Clear video....podium archers wasn't really close enough...

very nice

Great video. Looks like a great way to tie in your peep but did you misstate about the way you should wrap with the rotation of the string? You clearly wrapped against the rotation of the string. Do appreciate the video.

Have you done a video on how to adjust a limb driven rest so that it supports the arrow as long as possible? I’d love to see this. I’ve got a cable driven rest and I’m switching to limb driven. I want micro adjust and it would be nice to control when the rest drops on my draw board. Thanks

👍

I'm very confused as to the direction you wrap the serving around the string. In the introduction you mention wrapping with the rotation of the string, to me that means the two spirals turn around in the same direction. And that would make sense because that way if you add twist to your string, the wrapping becomes tighter, not looser. Now in your example, no matter which way i look at it I can't seem to help reaching the conclusing that the spiral of the string and the spiral of the wrapping go in opposite directions. If I look at 3:26 then the string clearly twistscounter clockwise going to the top of the screen. That while you wrap the serving clockwise going up to the top of the screen. Not to say the way this peep is tied wouldn't hold, or maybe I'm missing something but the way this wrapping is done looks backwards to me.

Can’t wait to give this a shot. What size serving works best for this?

If you adjust peep with a twist in the string will it effect timing? Thanks great videos

Awesome video! What size serving do you recommend for the job?

I wish I had u in new jersey to tune set up my bow know that I am shooting more notice lil things that could be tuned better

Am I wrong, you wrapped that the opposite direction of the twist of the string. You mentioned to wrap with the twist of the string.

Damn cool video

IS IT JUST ME OR IS HE GOING AGAINST THE TWIST OF THE STRINGS. IN THE VERY BEGINNING. THE STRINGS APPEAR TO TWIST COUNTER CLOCK AND HE STARTS THE WRAP CLOCK?

I'd like to start doing this myself. I started looking at serving string but there are some different sizes.. What size serving string should I use to tie a peep sight? Thanks for all of the content I'm new to archery and your channel has quickly become my go-to. I can't get enough of your vids. Thanks.

Great title lol

You said you always liked to wrap in the same direction of the string , but you wrapped opposite of the string wrap.

I dont understand you said you twist with same way than your string twists, but what i see is that you are rotating opposite? Or is just my bad english, i missed something?

Does the type of serving material matter? What type of string was used to tie in this peep?

Nice, but back serve that last part. We all know you can do it!

Question. I’m having issues peep twist on my Mathews V3X 29”. Since I’ve bought it on it’s release I’ve had nothing but issues with it. I’ve had my local pro shop retie it several different times along with tieing it in several different times myself. I’ve even tried tieing it in several different ways. I recently went to a different pro shop and all he wanted to do was mess with my d-loop so when I draw it would straighten it up. Did not work so went to my other pro shop yesterday and just had a new peep installed. I get home and after the first shot it’s twisted. What gives. I’m tired of having to mess with my peep every time I want to shoot. Hopefully you may have some advice. Maybe I need to put a string in my string to mark center and just pull the peep all together to straighten everything back up. What do you think.

Would I be able to do this same technique on a Oneida Phoenix bow?

What type and size of serving you like to use?

That string lay is left and your serving is right ?

A SUPER late comment, but....what diameter serving do you use to tie in?

Dude : )

Does peep sight brand matter? What is the brand you’re using there?

11:46 voice crack!!!!!

How do you know where to tie it in at?

What material are you using

where is ur shop located?

I wonder if anyone else uses this method?

Is it a Peep or a Puppy?

Wish you could do this vid again slower

Hey Kellen, just came back to re-watch your vid for a refresher on tying in a peep, and want to point out something i missed the first time. I suppose one might take this as a mild "criticism" but please don't, i'm not trying to be critical but rather just pointing out what appears to be a case of mis-speaking when you addressed the rotation of the bow string and which way it dictates your serving. Upon getting your bow in the vise, you said that looking down the string from the top limb that it "twists to the right" and you made a clockwise motion with your hand/wrist. That's exactly what most ppl think when we say or hear "to the right", ie. clockwise. But the camera close up of the string shows...looking down it from the top...that the 2 strands are spiraling counter clockwise. "left hand thread" in mechanic parlance. You wrapped the serving clockwise, ie. opposite direction of the bow strand twist. Which is fine, i'm just wanting to be clear on the proper way to wrap the serving. On other hand, maybe i'm misunderstanding something. If you see this and have a comment, either in agreement with my observation or a correction, that would be cool and appreciated. For my peace of mind and information. Thanks, love your channel.