Siemens NX Tutorial | Part List, Bill of Material, BOM

Рет қаралды 3,213

Күн бұрын

B3D-14 | Siemens NX Tutorial Drafting | Learn how to fill in parts lists, but also how to filter them. Or create customised lists.
Select additional information, such as supplier, material or parameters of the parts, for example the sheet thickness.
Sort the content and create fixed position numbers.
Define different delivery scopes, for example with or without spare parts.
Find out how these notes can be used to display any combination of parts list information.
And how to save your customised parts list as a template to create a perfect parts list later with 3 clicks.
And finally, how to export the parts list.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on KZfaq. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
learnnx.com/downloads
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Preview
00:01:04 Filling out the parts list
00:02:28 Filter the content by level
00:04:05 Define content manually
00:05:30 Attributes control visibility
00:07:13 Extend parts list
00:10:03 Display parameters in the parts list
00:12:14 Format parts list
00:14:00 Sort parts list
00:14:46 Fixed position numbers
00:17:27 Arrangements in parts lists
00:20:22 Balloons
00:23:46 Save as Template
00:27:19 Export parts list
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse

Пікірлер: 30

@SomeOne-rv8el 5 ай бұрын

By far the best channel to learn nx

@shivasluzz 4 ай бұрын

Great & Big thanks! Now, waiting for the Sheet metal playlist!

@learnNX 4 ай бұрын

Now that the basic courses are almost complete, the question naturally arises: what's next? Sheet metal, freeform, cam... but these are just more details on how to use the programme. But how does any modelling begin? What speeds up the process? How can you design more cost-effectively? I would like to fill the next course with these topics, influencing the decisions that need to be made in the design phase, regardless of the CAD system. Of course, I will explain this using NX as an example, but the methods can also be applied in other programmes. I hope that you will also participate in this course.

@Gustavo_SAAD 2 ай бұрын

Perfect tutorial, helped me a lot brother💯

@Stocjon1985 5 ай бұрын

So far and by far the best tutorial for such subject in YT. Tks. Today I work with CREO and although it has some great functions it is far away in general from NX.

@learnNX 5 ай бұрын

Thank you, my last video on parts lists was from NX 9, it was high time for an update.

@alirezasaedi2613 5 ай бұрын

Catia software is also easily passed

@Stocjon1985 5 ай бұрын

@@alirezasaedi2613 you mean, NX better than Catia? or the opposite?

@alirezasaedi2613 5 ай бұрын

I have been working for almost 20 years of Catia, NX has worked on much detail in all sections

@learnNX 5 ай бұрын

@@alirezasaedi2613I accompanied the introduction of NX at Daimler and, together with a Catia expert, we compared all the functions in detail. At that time (NX7.5), we rated the two CAD systems as equivalent. At the time, Catia was slightly better at modelling, NX was better at linking geometry (WAVE). All gaps between NX and Catia were closed by NX12. Even the NX kernel had to be reprogrammed for this. Today, I consider NX to be the most powerful CAD system. However, any CAD system is only as good as the knowledge of its users, which is why training is so important (welcome to learnNX). Then there are the extensive settings that have to be adapted to the requirements and ultimately the processes from planning and modelling to production.

@samirarad9362 5 ай бұрын

Thank you very much . SO useful.

@LofEtmaz 5 ай бұрын

Very very nice, thank you very much, very useful

@alirezasaedi2613 5 ай бұрын

It was very perfect, thank you

@halidelmalik5268 5 ай бұрын

Thanks sir

@arniko2762 3 ай бұрын

Thank you for another great video. How can we add in a the title block the total mass of an assy, the sum of all the assy components mass?

@shivasluzz 4 ай бұрын

Thanks

@learnNX 4 ай бұрын

Thank you very much, Shiva! This is very helpful for learnNX. Greetings Jürgen

@wg1159 2 ай бұрын

I have many of the same components in the assembly. How do I define the "CALLOUT" for all these at once? Now I have to define this Nr. for each individual instance of the component.

@hoffybeefe 4 ай бұрын

21:38 I don't think this is entirely accurate. It may be that i have some Customer Default setting changed to allow this to happen from long ago and i can't recall exactly which one. But you can indeed select faces of cross-sectioned (or not cross-sectioned for that matter) components and have them update as expected.

@learnNX 4 ай бұрын

Hi hoffybeefe, that sounds interesting! Please 🙏 try to remember which setting you have activated to select the component by selecting the sectioned area.

@nauticakogut6770 2 ай бұрын

I have a question, is it possible to create a bill of materials for a component with multiple bodies? Example a weldment designed in a single part not in an assembly file

@learnNX 2 ай бұрын

Yes, this is possible. You must select the "Select Object" option in the "Parts List" command and then select the bodies. The parts list must of course contain the corresponding attributes.

@Stocjon1985 5 ай бұрын

Hi now I ask. If your assembly had a part-family how NX handles if the user wants one Table for BOM and shows the different variants for the assembly? Lets say that the part that you set as spare part in your video were different in size so a part family was required and your assembly has two or even more variants.

@learnNX 5 ай бұрын

Hi Stocjon, If the assembly comes partially or completely from several part families, the current assembly status is always listed. So if you replace a part family part, the parts list is updated. If your assembly is offered in 10 sizes, you need 10 separate drawings. The greater the variance, the more likely I would only work with part families and only build the assemblies using part families.

@Stocjon1985 5 ай бұрын

@@learnNX Tks for replying.

@jimmy221993 4 ай бұрын

Hi, upon adding $MASS system attribute in my partlist, Mass value is not coming in the column.. Only - (dash) is appearing. I'm using "Reference existing part" template for drawing creation. Could you let me know what should I do to get Mass property of each components ??

@learnNX 4 ай бұрын

Hi Jimmy, open a part on your assembly and look under File, Properties, Mass. Have you activate the option "Update Mass Properties on Save" ?