Glad to see more content from you my dude! I know you want that flushed compensator and slide, but I like what you have as it gives it a nicer silhouette.

I just checked out the Legion x-5 today. now i see this video and am impressed by the quality and story telling. sub well deserved

I’ve been rocking with my xcompact for a little over 2 years and I’ve gotta say I’ve been loving shooting it at the range also what I was looking for in size and feel for a carry pistol great gun out of the box

Fantastic review.

That’s a sweet looking piece!

One of nicest 320's I've seen. Nice work!

Great video, great presentation. 👍

Great Vid, Thanks for showing Gas Pedal brand thumb assist. Many other holsters fit as well and easy mod as well

I've been thinking about putting a gas pedal on my FN 509c Tactical. Your Sig is AMAZING 🔥🔥🔥🔥🔥

Dude good to see you again. Been a while. Just wanna say you video with the Glock 45 modes is what got me to get my permit to carry and even bought the Glock 45 as my first gun ever. I almost have it similar to yours. Just need that short fire light and that undercut.

Yessirr more great content😎💯

After moving to Sig, I have never looked back. They just keep killing it.

Finally bringing more content.. LOVE THIS for you man. Great video editing too.

Great content as always. Hard work and love put into the editing and presentation

Great video, inspired me to start my own build!

Glad to see you back! Great video as always. Looking forward for you to review P320 AXG PRO or AXG LEGION.

Sigs are awesome.

If you want flush, you can get a Mischief Machine commander grip module that’s made for the PMM barrel and comp, or you can just cut down a full size grip and bevel it to look just like the factory one. Or you can go with the Fdez P320 compact com’p slide and 3.6” barrel. It would look great both ways. The Mischief Machine grip module is full aluminum with a steel locking lug and more of a 1911 grip angle. Check em out 👍🏻 you could also rock the TLR-7 sub with the Antimatter Industries 1913 micro wing if you want a really nice gas pedal/ thumb throttle that’ll fit in regular holsters.

Great Video, thank you for making it. I am a huge P320 fan and have been since they first came out, which means that my first two P320s had to go back for the “voluntary upgrade.” I currently have five of them. My last one I build from spare parts. I had enough parts from all the upgrades that I did to the other four guns that with the purchase of an FCU I was able to assemble another complete gun. As someone who worked for the Army for over 43 years (21 Active Duty) and has some knowledge of the military procurement system, I can tell you that Sig won the contract for three reasons. First was reliability. When the testing was over [only] Sig and Glock were left standing. FN was a close third followed by Beretta. The second reason, and most important reason, Sig was the [only] manufacturer that provided a gun that met the specifications in the bid announcement for a “modular” and configurable handgun. Lastly, was price. Sig’s price was almost 40% less than Glock. If the Army had not been so insistent on a manual safety [or] Glock had been willing to absorb the cost for retooling to make a manual safety gun, Glock would have gotten the contract. For the record, the U.S. military has a contract with Glock, as due DHS, DOJ, and several cabinet departments. Glock is the primary sidearm for most special operation units across all services. The Army really wanted the Glock and would have compromised on the “modularity” requirements, but they wouldn’t compromise on the manual safety, thus, they couldn’t justify the cost difference. While it is not known for sure, it is rumored that FN actually had a lower price, but the guns didn’t perform well enough in the end.

Really underestimated them and make great edc's too. Thanks again for the vid.😎

Beautiful pistol 🔫

Honestly I just couldn't be happier with all three of my x carry pistols. I do like the spectre grip the best though.

He’s back!

Nice presentation my man! I’ll wait for another before a sub but I’m digging your stuff!

Yes! More content dude! Sidenote... I'm just gonna have you build my firearms for me from now on. Sound good? Cool. 😂

J-Body, need to put the Radian Ramjet Afterburner on that G45. Great video. Glad to see you back at it.

Great video, nice looking pistol. Glad to see content from you.

The X-Compact 3.6 Slide will give you the flush look you want.

Great to see a new video from you

I have a similar build but I used a full size frame that i cut down with a scroll saw and polished with dremel. That’s the only other option I think, if you want a flush look.

My build is damn near the same, except I have the Icarus precision x carry frame, an apex trigger, a 508t and tlr1 hl! Shoots like a dream!!

Cool content and subscribed

For a flush look get the full-size frame with full size dust cover and chop it to the size of your slide and comp. There are vids on how to do it.

I bet this gun is over $1000. Definitely out of my budget range, still looks like a nice gun.

Great video, I built an Icarus Precision P365 xl, with a Norosso P365 X slide and a Parker Mountain Machine Micro comp. WIth the comp, it took about 750-1000 rounds to get it broken in where it shot reliably. Now Ive been running it for about 2.5 years and it is a tack driver. Breaking them in is the key. Nice build.

Great shout out to Boise Idaho! I also shop at stockpile.

Had a Glock for years. Picked up the XMACRO and holy shit. Perfect ergonomics and perfect grip and I can shoot it so easily. My wife jsut got one, and she hasn’t shot since pre Covid. She was tagging bulls eye. With the Glock all over the place. This is the new status quo

Btw. Your Glock Modifications video is hands down the best pew vid on YT… just sayin…

This edit was sick, although I’m a Glock guy I’ve been thinking of building a P320. PMM comps for the win also!

i still carry my rxp xcompact and its a beauty

3.6” sub-compact with a PMM micro is a flush fit in a carry size frame

I have an Xcompact Zev P320 build with a WC grip plus Gas Pedal. LOVE IT. I plan on getting a Zev slide for my G19 but that shit is always sold out.

Best bet for a pmm flush comp. Run a sub compact slide and get the jttc mushi compensator. Icarus precision has a 365 xmacro for a full sized option with a pmm comp already installed

sig makes a full size length x series grip module that should give you that flush look your lookin for great video and nice lookin build my man!

Just from where you were shooting I thought that was Pleasant Valley or similar South Idaho desert. Stockpile is my go-to as well. Garand Thumb shops there 🥲

Just a question, how come the frame is longer than the slide? I really like the looks of it. If i want this set up which frame do i need to get? Looking to upgrade my ca320

If I am not mistaken, the standard p320 grip module and the regular size pmm comp will have a flush look.

I too wanted that flush look, and after a lot a research the only that I found to make that happen is to get a fill size frame and cut it down to size. I would rather not have to do all that work but i havent come up with anything else

Hi Principle Caliber, I appreciate your content! I was wondering, what would you recommend for an EDC (concealed) for a right handed guy with an almost blind left eye (lazy eye) but good right eye vision that conceals well, doesn't have too much recoil, and I can actually aim well (and quickly). I currently have a Springfield XD Mod2 4" 9mm, OEM. I love the grip on it, it's like it was built for my hands. However, the iron sights I've trained on I do "well" on for my eye sight condition but I know I could do better; it's very difficult for me and takes way too much time to aim for an accurate shot; also the size was very hard for me to conceal and was not comfortable. I've been thinking a Glock 43X MOS, with some kind of modifications to fit my needs/condition. Thoughts? Much appreciated! Keep up the great posts!

It looks like you put a compact slide on a Xcarry grip. My Xcarry grip is flush with my Xcarry slide. Now as far as running a flush comp I think you'll have to get a full size grip module and put a bigger comp on like a dual port one. Agency arms makes one that is a little longer on the single port but it would look kind of funny where the recoil spring comes out sitting on the grip.

3.6 barrel is flush not the 3.9

Unfortunately, I don’t believe there is a compensator made that would sit flush but if you’re willing to get the work done on a frame, I would get a full size frame and cut it down so that it sits flush with that compensator on there but in my opinion I think it looks awesome just like that

The only flush pmm builds are a Carry size 3.9 with the gen 2 jttc or the sub compact 3.6 with the ultra jttc.

😍

was going to turn my p320 carry into a "custom" full size, was like 900 in parts...a x5 legion is 1050....pretty sure having 2 guns is better than one

@principle caliber ….. so I pretty much got everything you did to do my build but for whatever reason when I got the jttc micro comp it does not fit properly. There is a gap, did you order a compact barrel or the sub compact barrel for your build? I just do t know where I went wrong. Any advice?

Nice 👍 setup What size is the slide 🛝 is it a 3.9 or 3.6 thanks 🙏

I’ve seen someone use a full size frame and cut it to flush fit the 3.6 slide with PMM comp. Just an idea.

Question.. so I just built a compact size with 3.9 threaded barrel I put a DPM also. I tried all 3 but every other round it jams or doesn’t go back to battery… is that some of the issues you also had? Just wondering since you didn’t touch on what they were. Also would you recommend to just keep shooting till I break it in?

Great build ! Im actually in the process of a similar build. Im kinda new to the game…Question, did you get the sub compact or compact combo from pmm ?

Rolled through the comments and didn’t see anything, you have to buy a X full length grip module and cut it down. No one makes a 4.1” grip module since 3.9 is carry and 4.7 is full.

3.6" slide will give ya flush fit

What size slide is this though? I like the none flush look for some reason

Nice setup What size is the slide, is it a 3.9 or 3.6 thanks

you could get the full-size frame and cut it slightly longer than the x-carry size

Exactly what I want to build, but I also want that flush fit. I will just get a full-size frame and trim it. My 320 X Compact slide and Harrington Arms comp are 100% flush on a full frame. Specifically, I have the Icarus Precision Socom Full module, and it's very impressive.

How much did that build set you back ? I have a factory X carry and love it . Was very skeptical with all the accidental discharge rumors . I recently dropped it by accident in a holster about waist high . It hit a hard concrete surface and passed the accidental discharge test in my book . I was scared shitless when it fell and hit the ground . I usually am very careful with handeling firearms all humans make mistakes at some point . Needless to say no misfire happend .

greetings! good video! Have you had a problem with the slide cover TYRANT Designs I bought one and while practicing the extractor nail system flew away I wrote to them and they sent me another one but after several practices I saw it very marked and I dismantled it. what is your experience?

Arc reactor just came out p320 slide with build-in comp

It's like collecting Jordans

What gun cabinet is that behind you? I'm in the market for one and could use the direction.

I’m doing this EXACT build just a different slide. What side holster do I need. IWB KYDEX. Would it be. X CARRY size???

The last thing i want to see at the end of my barrel is the front sight. Not an additional length of any compensator.

Nice do you have it your edc rotation?

what barrel size did you use?

Better watch out bro I hear them shits like to retaliate against their owners and spontaneously combust 🤣 just playin, nice build!

How long is the barrel?

Hey have you been experiencing problems with the over hang of the sro?

Just get an X5 grip module. Or the 3.6in barrel/slide.

Sweet…where can I get that “gas pedal” mod for mine?

What is the barrel length you picked?

How much did this build cost?

I'm Afraid to carry mine in fear of sending one into my junk

Does this one fire on its own too?

Any update for this build?any issue? plan to build same as yours.

Yeah and as soon as they stop firing in holsters they'll be good

Want to sell it? I am an FFL in Denver, and it would be an easy sale! You can keep the SRO as I run the 5MOA, the 2.5 is too small for me.

You from Boston?

You need to get a full-size frame and cut it to fit flush. kzfaq.info/get/bejne/hZtda8141prJj6M.html

Are these still not drop safe?

I put a video out on a flush fit p320. Uses the herrington arms comp though. You likely need a full size frame. kzfaq.info/get/bejne/pcmVZKaBz5vDmHk.html

you shoulda bought a staccato c2 ©

got that dad bod

You’re not going to be wearing ear pro if you have to actually use it. But you’ll have a souvenir for your trouble…permanent hearing loss.

How much did sig pay you to make this video ?

okay mfer. im 20 rn and cant buy a handgun but in august, im copying your homework jus changing up the question you got wrong and making them right.

first 7 seconds of video shoots camera.....

Glock better

The forgot that this gun love to shoot its owners?

No thanks, I want to keep my balls attached and not have them blown off. I like sig, but I am staying away from that particular product.