Silverback Tac 41 Inner Barrel Removal And Hop Up Rubber Replacement ( Disassembly )
Рет қаралды 9,580
2 жыл бұрынI take apart the silverback tac 41 sniper to fix a problem where it won't shoot. I remove the tac 41 inner barrel and hop up and swap out the stock 60 degree bucking for a 75 degree bucking and clean the inner barrel and all the other moving parts.
Thanks for watching! LIKE the video if you enjoyed it!
My Instagram: @realairsoftconnor
Watch more videos!!
The Sliverback Tac 41 is OVERPOWERED!: • The Sliverback Tac 41 ...
Silent Ghillie Sniper is UNFAIR!! Silverback Tac 41!: • Silent Ghillie Sniper ...
Business email: airsoftconnorbiz@gmail.com
Note: These videos are meant for entertainment purposes only!
#airsoft
@jerichosniper1407 2 жыл бұрын
Just got my tac and you are the only one that has given a real indepth guide thank you 😊
@airsoftconnor 2 жыл бұрын
No problem!
@rogerborg 2 жыл бұрын
Splendid tutorial, thank you for taking the time to create it.
@spikesfamily Жыл бұрын
Just used this vid to get my gun apart, installed an r hopped pdi 6.05 barrel and holy shit this made it easy. To anyone who is feeling intimidated taking this gun apart, don't! It's not nearly as bad as it seems
@airsoftconnor Жыл бұрын
Im glad it helped!
@timfromm1975 2 жыл бұрын
Just waiting on my gas blowback upgrades to come in so I can fit one of my edgi's. Very helpful video!
@Terminatorbart 2 жыл бұрын
Gotta love that hop dial!
@m60user 2 жыл бұрын
Outstanding tutorial.
@Channy1701 2 жыл бұрын
Glad this came out, just order a new bucking
@davidschmidt6013 2 жыл бұрын
Next time, try holding the hop-up chamber under some hot running water for a few seconds. That will expand the aluminum slightly and expand the ID of the barrel 'hole'. Can't hurt to try...
@driumz 2 жыл бұрын
Wow great guide actually
@mcgman10 2 жыл бұрын
Could you do a vid on taking the outer barrel and inner barrel out like you just have and how to clean the inner barrel from that, love the vids. Thanks
@-RuleBritannia- 2 жыл бұрын
Man you need more recognition, you are such a good youtuber!
@airsoftconnor 2 жыл бұрын
Thank you!
@sr.sniping4146 Жыл бұрын
please help me i’ve pushed the black barrel holder down and i can’t get it out. can someone please help me
@motodude1234 2 жыл бұрын
Best resources out there for the tac 41, many thanks. Do you know what's a good spring to use in this to get under 2.28 joules/ sub 495 fps with a .20g bb?
@airsoftconnor 2 жыл бұрын
The SRS m160 spring will get you to 500 with a .2
@cjburdenX1 Жыл бұрын
Hi Connor, I've looked and looked and haven't been able to find a video on removing the orange tip. Is it a simple heat and pull for the plastic? I have a solid pin in mine not a set screw, and I didn't want to damage anything.
@airsoftconnor Жыл бұрын
As im not sure exactly what the new tac41 orange tips look like i cant give you an accurate answer. If its anything like a jgbar10 orange tip you would just use heat and unscrew it. Then pull the pin out with needle nose pliers!
@ruslanclark5272 Жыл бұрын
I've ripped two buckings already trying to push the hop up onto the rubber but the crappy teflon tape just bunches up and prevents me from being able to see the flat face witness marks so I have to repeat the process. I'm pretty mad about just burning through £15 of 70 degree SRS buckings. I have one left, should I just install it without the tape?
@airsoftconnor Жыл бұрын
I said in the video I didn’t like the tape. Its not worth it
@christophersummers790 2 жыл бұрын
Thank you so much for this video!! I actually watched this because I want to clean my barrel without getting any oil/ residue on the hop rubber during the cleaning. At 0:54 you take that little red rubber thing out, is that the part I don’t want to get the cleaning stuff on? I want to dissemble the gun as little as possible (because I don’t want to shred the bucking) when cleaning the barrel. Many many thanks!! :)
@airsoftconnor 2 жыл бұрын
You should only clean your barrel with rubbing alcohol. Now you need to be careful when running a cleaning rod though because you can damage the bucking lips. So if you want to clean it without taking it all apart, just take the barrel off with the 3 hex screws. Then id run the cleaning patches from the end of the barrel to the hop rubber (don’t force it all the way through). Once its clean enough, you need to use a q tip to clean where the bucking is because you will have pushed some dirt to the front of the barrel. Avoid oils because they will attract dirt.
@christophersummers790 2 жыл бұрын
@@airsoftconnor Thanks for the quick reply pal! I’m glad I asked then because I was going to use my Power Pull Through Kit for my air rifle, in which you use Napier air gun oil in the barrel! Okay brilliant, thanks ever so much. It sounds like I’m probably better off just removing the hop up when cleaning. In which case, would you recommend having a spare bucking to hand in case it shreds when removing? Many thanks!
@airsoftconnor 2 жыл бұрын
@@christophersummers790 yeah have a spare if you take it off. If you have dry lube like i had just soak it before you take it out. You can clean it without removing it though. You just need long q tips
@christappan5195 7 күн бұрын
Hey man thanks for being the Tac-41 Guru👍 just picked one up and can’t wait to get out there. All I run is GBBRs so maintenance is a thing I like to have down to a science. is there any amount of grease (super lube) I should apply to the outside of the cylinder/bolt for a smooth bolt pull or is it already as smooth as it can be with out lube? Just don’t want to overthink it lol
@airsoftconnor 6 күн бұрын
@@christappan5195 i would put a little bit of super lube, the upgraded glide rings from skirmshop made a difference for me
@Greendore Жыл бұрын
silverback need to make an updated bucking where they dont rip instantly! Also SB buckings with their chambers do not need teflon, you'll have 100% seal with out it.
@airsoftconnor Жыл бұрын
Yeah, im using the stalker hop up now! Also i took the teflon off!
@Greendore Жыл бұрын
@@airsoftconnor I'm super tempted to get the stalker chamber for the SRS, would you say its worth it as a upgrade?
@ALMASTERFUNK 2 жыл бұрын
I want to out a Prometheus 6.03 in but I’m scared lol
@Cho_Sitter 2 жыл бұрын
I'm going to use a 150N spring, which of 70 degrees and 80 degrees of hop-up rubber is appropriate?
@airsoftconnor 2 жыл бұрын
80 degree
@Cho_Sitter 2 жыл бұрын
@@airsoftconnor thank you sir !
@maximtrading4186 2 жыл бұрын
hi, how you know what degree rubber you need?
@airsoftconnor 2 жыл бұрын
Its based on what fps you have!
@Channy1701 2 жыл бұрын
Does your bb curve to the right or left when you shoot yours?
@airsoftconnor 2 жыл бұрын
No, that sounds like a dirty barrel and hop up bucking
@Channy1701 2 жыл бұрын
@@airsoftconnor must be the hop up bucking then, I haven’t fielded it yet
@airsoftconnor 2 жыл бұрын
@@Channy1701 Everything still can be dirty from the factory too. But some have said the the hop up screws are loose and that can cause the inconsistencies
@Channy1701 2 жыл бұрын
@@airsoftconnor ok thanks for the help, I’ll try cleaning it
@Channy1701 2 жыл бұрын
@@airsoftconnor there was a hole in the rubber at the top of the piston, is it possible that can cause curving?
@Thedentistsniper 2 жыл бұрын
do you apply any lubricant to the outside of the bolt before putting back in the gun?
@airsoftconnor 2 жыл бұрын
You can, you just have to be carful about the dirt that will stick to it
@lukasforchtgott7870 2 жыл бұрын
7Nm !??? I feel like they have an apartment there 4Nm 🤷♂️
@mcgman10 2 жыл бұрын
First
Stalker Airsoft Designs
Рет қаралды 7 М.
Kamal_kl4
Рет қаралды 3,1 МЛН
Ortus Martial Arts
Рет қаралды 2,2 МЛН
Jogador Caro ⚽🔥
Рет қаралды 5 МЛН