How to Seafoam Small Engines

How to Seafoam Small Engines - Step by Step

Рет қаралды 98,483

5 жыл бұрын

Have a small engine that isn't running well, rough idle, won't start or just doesn't have the power that the engine used to. This video shows you how using a simple product made all the difference. Easy, cheap repair that actually works.
Disclaimer:
This video, description & comments may contain affiliate links, which means that if you click on one of the product links I may receive a small commission.
Due to factors beyond the control of Silver Cymbal, I cannot guarantee against improper use or unauthorized modifications of this information. Silver Cymbal assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Silver Cymbal recommends safe practices when working on machines and or with tools seen or implied in this video. Due to factors beyond the control of Silver Cymbal, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Silver Cymbal.

Пікірлер: 98

@SilverCymbal 5 жыл бұрын

I hope this video helps you realize what can be done to improve your engine with very little effort. If you want to try Seafoam you can get a special price with free shipping right to your door by checking it out here: amzn.to/2RlzrZ0 - Thanks for watching

@Remas20007 6 ай бұрын

Is there a reason on why you didn't use the sprayer bottle instead of fumbling with a funnel in a tight space? it is much easier to control

@djprojugs6606 2 жыл бұрын

All that smoke isn't the carbon burning off. Seafoam has oils in it and it is the oil being vaporized that you are seeing pushed out the exhaust. This is why you also see the smoke come out the air intake as well as soon as you started pouring it into the carburetor. You are 100% correct that the carbon is disintegrating but I just wanted to simply share the info with you and others who might read this that about 90% the smoke we see is from the oil in that's in the seafoam. Still a great video! Keep up the great work!

@tonyf.8858 3 жыл бұрын

I used it for the first time on my lawn mowers engine surge and it worked! No more surge. Thanks for the vid.

@dalehammond1704 2 жыл бұрын

Sea Foam is spectacular for improving the starting/running of small engines. I've used it in my lawn mower and weed whacker. Sea Foam and the Lucas products are a blessing to those who can't afford sky-high repair bills. We had someone gift us with a riding mower and it cost us nearly $1000 to have it "repaired." It never did work right so we sold it at a loss. Most lawn mowers and weed trimmers today are "throw away." Not worth having someone repair them. Sea Foam is low cost and fixes many starting/running issues for me.

@mikefisc9989 4 ай бұрын

I would add some SeaFoam to your oil prior to your oil change on that Gator. The SeaFoam will help remove most of the sludge from the crank case. On an engine this old and run this hard I would probably do this for several oil changes in a row. Thanks for the video.

@meagaindave2049 5 жыл бұрын

Love the vid. Lawn looking good too!😊

@SierraOne 5 жыл бұрын

Good stuff that sea foam... Not so much on modern automobiles (direct injected comes to mind) but certainly on small engines, 3 cheers for "Old School"!

@SilverCymbal 5 жыл бұрын

Absolutely! I also like they never went crazy with the price. It's still under $10/can compared to some modern "gimmicky" type products which can be 4x that and have no history like the Seafoam. Thanks for the comment and watching my video too,

@billynash4449 4 жыл бұрын

great information, didn"t know how great this stuff was. Wow

@SilverCymbal 4 жыл бұрын

Definitely good stuff. I use it for a lot even stabilizing gas too

@Harlanmote 4 жыл бұрын

Works wonders on a outboard motor too. Use it once a year on my 1986 40hp Jonson.

@garypratt1453 Ай бұрын

Great presentation

@YardworkWithJohn 10 ай бұрын

I put 1oz of seafoam per gallon in my gas cans any time I'm filling them up. All of my motors run so clean and smooth, especially the little 2-cycle engines. Highly reccomended, especially on 2-strokes but my lawnmower and snowblower definitely get the treatment too!

@bwagenberg 4 жыл бұрын

Oooooh, so that's what you look like. Just binge watched many of your wonderful videos (7/2020).

@jamesfoster6625 3 жыл бұрын

Great video man! Thanks

@SilverCymbal 3 жыл бұрын

Glad you liked it!

@jamesfoster6625 3 жыл бұрын

@@SilverCymbal 💯 Appreciate people like yourself willing to help others. I worked some magic myself and didn’t even have to remove the carb (again 😒) from my daughters 2006 Polaris Predator 50cc I picked up for her but wouldn’t run. With your help and some convenient sea foam I already had along other random assortment of ☠️ chemicals... THE QUAD JUST FIRED UP FOR THE FIRST TIME AND I’m ECSTATIC! It’s been running for about 30 min now after I adjusted the air/fuel screws it sounds better than my newer equipment lol. Thanks buddy! You are the man and much appreciated! Enjoy yourself weekend and god bless!

@SilverCymbal 3 жыл бұрын

@@jamesfoster6625 Thank you so much for the nice words and sharing this, Seafoam has saved me more money over the years and there is nothing like an engine running for the first time when its been off for ages. Glad to help!

@tonyscarboro8918 2 жыл бұрын

I'm a firm believer in sea foam. I have spray sea foam that I spray into carbs. I have gotten a lot of engines to run that wouldn't before just by spraying in the carb.

@lakeratatouille 5 жыл бұрын

I did a hot soak on a 2 cycle outboard that had been sitting for 5 years. Cleaned it up and brought the high idle from 2000 rpm at idle down to 8-900. lol yeah and I pretty much smoked out the neighborhood

@SilverCymbal 5 жыл бұрын

I love it. Seafoam is great especially for marine applications like that. I have seen that type of smoke, it's CRAZY on a really old machine. I have personally seen the results inside the chamber before and after and Seafoam really cleans at least 70% of the carbon off the head without disassembly.

@sclivestock5943 2 жыл бұрын

I have an arc where gas has contaminated the oil. Would seafoam be good to use to clean the engine?

@michaelbradley8508 5 жыл бұрын

Great video - very informative. Is there anything that should be done differently for a 2 cycle engine?

@SilverCymbal 5 жыл бұрын

Thank you kindly I have had great success with 2 stroke engines with Seafoam. Obviously for small engines you only need just a little seafoam but it works just as well. 2 strokes get so much carbon build up that I have found seafoam is even more effective with them.

@francinemartel7979 2 жыл бұрын

@@SilverCymbal î

@lorddabber3016 Жыл бұрын

I thought maybe my trophy wife was going to make an appearance at 5:40 !!!

@PPGarm3 2 жыл бұрын

If I'm using it on my ATV. Should I just add it to the idle rpms or give a little throttle? And add it cold or let it get up to temp?

@leoschneider3570 2 жыл бұрын

I love how seafoam has now become a verb

@sgocmen 5 жыл бұрын

I just got a Toro Greensmaster Flex 21 reel mower from an auction. It’s in overall good condition and was used at a University. I’ve watched your Toro Greensmaster restore video. Would you recommend doing this after following the steps in your restore video? Thanks for making a great video!

@SilverCymbal 5 жыл бұрын

Thats great about the Flex. Yes I would do the seafoam treatment on it. It will clean out the combustion chamber of build up. I also run some seafoam in the gas too to help clean jets as well.

@Tom-db7bx 2 жыл бұрын

I left fuel in my almost new riding mower for 2 years and now it won't start. Eventually I can start it by moving the governor. Even if it runs for a bit it won't start from the key. I need to pull up and down on the governor again. Also noticed the choke has no effect. Will the Seafoam treatment help me? Some openings in that carb must be clogged.

@BermudaBoss 5 жыл бұрын

I will try this on my blowers!

@SilverCymbal 5 жыл бұрын

It works really well. I have used it on some "junk" Stihls and Echos that I got free many of which were revived with this. Really great stuff!

@BermudaBoss 5 жыл бұрын

@@SilverCymbal I am definitely going to pick some up. I normally break down the carbs and use a heated ultrasonic cleaner but this seems so much easier.

@michealmercredi6554 4 жыл бұрын

Can yu use seafoem on can am 450 outlander 2019? And how could yu use it?

@kove 5 жыл бұрын

Haven't tried it myself, however I used to work at car parts store and I can't count how many guys swore by Sea Foam.

@SilverCymbal 5 жыл бұрын

I used to think the stuff was like Marvel mystery oil or fake products. Then I tried it and year after year it has amazed me and never let me down. The fuel stabilizing properties are fantastic too and unlike Stabil it doesn't stain your tank which matters on two strokes that you use the tank to see the fuel level. Good stuf.

@malisha1 5 жыл бұрын

I have been thinking about doing a seafoam treatment on my 2 cycle snowblower. When the engine is cold there a a metal on metal sound but goes away after a min. Plus muffler is covered in oil.

@SilverCymbal 5 жыл бұрын

Sounds like it could be a good thing to try. If it's 2 stroke and older you could have build up on the exhaust ports. You will likely be amazed at how smokes comes out after the treatment. Just take your time and follow the instructions and you should be good to go. It's been very helpful on many of my 2 strokes over the years especially some that I thought were junk and it brought a lot of new life into them without much work.

@JonLoeffler62 2 жыл бұрын

Will this work on a ford 4 cylinder engine using this method?

@PaoloFrancesco99 2 жыл бұрын

My problem is a surging Toro Timemaster, at idle only - not with blade engaged. I'm wondering if this method would get to the source of my problem, which I'm guessing might be clogged idle port between the air intake chamber and the fuel cup below. What do you think?

@BidenisPed0Peter 7 ай бұрын

It would probably clean your idle port, but you're better off using other products. B12 chemtool or pure xylene would clean much better than Seafoam for 1/3 the cost.

@someguyfrommemphis 4 жыл бұрын

Total judgement call here: You sound like a guy I want living near me. Mr Fix It. 👍

@generios3129 5 жыл бұрын

Will try with my weedwackers blowers and mowers

@johnhouli3450 2 жыл бұрын

Wow. That was interesting do u know if it comes in a spray like a carb cleaner can with the thin hose

@D--5 Жыл бұрын

It does. My local auto parts stores carry both versions.

@camgreer 3 жыл бұрын

So, your technique of pouring it in until the engine stalls, is that cleaning the carb or is it more about cleaning the valves? How is this stuff working exactly to smooth out the engine?

@francinemartel7979 2 жыл бұрын

Juyyyuui

@BidenisPed0Peter 7 ай бұрын

He was probably hot soaking the cylinders.

@jam79car 4 жыл бұрын

What about a cheap dollar store spray bottle with sea foam in it ?

@leoschneider3570 Жыл бұрын

Seafoam sells that!

@jam79car Жыл бұрын

@@leoschneider3570 they also sell the one with the straw.

@CasualCruiser 2 ай бұрын

Old video i know but when i see people doing this on a motorcycle, they only do it in the carb. Can i do this on the engine as well?

@evilredBoris Жыл бұрын

I love seafoam don’t get me wrong. But sometimes a tune up in a can isn’t enough and you need to actually replace the spark plug and do the carb and such.

@jamesa.holman2634 3 жыл бұрын

What type of machine is that last one? It looks like a spreader of some sort.

@mattfrekwentflier8342 3 жыл бұрын

I've watched other videos where they put Seafoam in the oil as well as this technique. Do you do that?

@SilverCymbal 3 жыл бұрын

I have done that many times on small engine stuff and tried it in cars but I honestly never saw any difference in cars this way. But putting it in the intake like in the video has always had an impact.

@ChuckNorris01 Жыл бұрын

Would it work for fuel injection atv?

@GlitchEmpireBrett Жыл бұрын

Have you ever tried sta bil small engine pro cleaner I got some haven’t tried it yet

@GlitchEmpireBrett Жыл бұрын

I tried the sta bill and don’t recommend didn’t seem to clean and seems to do more harm then good got some sea foam and worked a lot better

@kevcollupy 5 жыл бұрын

Thanks for the video, How often is this treatment recommended ?

@SilverCymbal 5 жыл бұрын

Using Seafoam like this was isn't something you need to do often. I usually do a big treatment like I did in the video maybe every 5 years after that or if I use it a lot or 2 strokes can use it every couple of years. I also use Seafoam as a gas additive for keeping jets clean.

@leoo0076 4 жыл бұрын

I always thought that you should change the oil after the hot soak.

@SilverCymbal 4 жыл бұрын

That is a good idea, definitely wouldn't hurt.

@MrAvidOutdoorsman 3 жыл бұрын

How do we know its just not burnt seafoam blowing out?

@scootdawg7542 4 жыл бұрын

Haven’t you done a how to video before about cleaning/adjusting lawn mower/tractor carburetors?

@SilverCymbal 4 жыл бұрын

I deleted it a while ago, it was soooo long. Sorry about that I plan another one for this winter.

@scootdawg7542 4 жыл бұрын

Oh shoot...it was sooo well done too! I have a lawn tractor carburetor issue, and I was hoping to be able to repair it with your video help! 🤷‍♂️🤔

@brettkelly4575 3 жыл бұрын

I always run my truck with seafoam in the oil for 50 miles the oil gets so much more gunk out and runs thinner

@MegaIslandboy671 3 жыл бұрын

I have a fuel injected atv...where do i poor the seafoam?

@k.g.442 3 жыл бұрын

in the fuel..

@mlhm5 5 жыл бұрын

I prefer Kreen to Seafoam. Just add to gas and oil and run.

@SilverCymbal 5 жыл бұрын

I will have to check that out. Kroilis one of the best products in the world, I will have to give Kreen a shot too.

@src4409 4 жыл бұрын

Seafood is actually meant to be added to gas and oil. Directions are on the back. Been using this for years in all my vehicles and 2 cycle engines. I've never poured it in, always gas tank and cap full or less in oil.

@soggyfries4347 4 жыл бұрын

Angled funnel $1.35

@johnnyvlee 2 ай бұрын

Ok but what if you cannot get the engine started in the first place?

@dexoconnor3033 3 жыл бұрын

What if the engine doesn't run to begin with?

@JDBajaBlast 3 жыл бұрын

Pour seafoam in the the engine let it sit for 24 hours, change the gas and oil, and run again and try to seafoam.

@tomdobbs6820 3 ай бұрын

Why not just add it to the gas tank as tge directions say?

@garypratt1453 Ай бұрын

I tried ,put a small amount in gas and i was avle to start

@rauljuarez3884 2 жыл бұрын

hey do you even answer your follower I noticed that but it be nice if you do just saying...

@SilverCymbal 2 жыл бұрын

Last year I answered over 40,000 comments, compare that to an average channel that responds to about 100 and I think I do ok.

@aggieforlife13 4 жыл бұрын

why not put it into the gas tank?

@SilverCymbal 4 жыл бұрын

You can but it’s not nearly as powerful. Doing it this was has a super effect. Will fix clogged carbs and totally plugged ones.

@aggieforlife13 4 жыл бұрын

@@SilverCymbal so my car isn't clogged I just think the Piston is super carbon up

@SilverCymbal 4 жыл бұрын

@@aggieforlife13 You can try it either way, the method I use is the heavy duty way. Really good for lots of build up.

@bill72pa 3 жыл бұрын

Clogs don't occur in the air intake, unless you have a nest of mice. Clogs occur where there's fuel, usually in the needle valve or float reservoir.

@k.g.442 3 жыл бұрын

@@bill72pa Correct.

@SVMSICE 2 жыл бұрын

Oil residue and muck inside the engine? lol Seafoam used in the method you used it is cleaning the carbon deposits off the cylinders, that's why you see better performance. Just an FYI on what the product is doing to help your engine.

@philliphall5198 Жыл бұрын

It’s better to use a spray bottle

@sgocmen 5 жыл бұрын

Did this on my Flex 21 today! Worked great!! Thanks for the video! kzfaq.info/get/bejne/j86ZdK2jxq24aI0.html

@SilverCymbal 5 жыл бұрын

So glad it helped. The flex looks great too. Don't be surprised if it smokes a little the next few times you start it. Its just carbon bits burning off but you are on your way to a lot of good years ahead.

@sgocmen 5 жыл бұрын

Silver Cymbal thanks! Next step is to get some of that P21s to really get it cleaned up 👍

@SilverCymbal 5 жыл бұрын

Just used it again on a car engine. kzfaq.info/get/bejne/qcx9mLB81Km0enk.html Stuff is amazing. I have a link for a small sized bottle in my pinned comment.

@The_Kayak_Guy. Жыл бұрын

Never ever do this! Read the directions and follow them. Sea foam works

@scrubsz 11 ай бұрын

Seafoam is garbage. It was originally made for two stroke outboard engines, not for todays 4 cycle engine that use ethanol based fuels. The deposits left in todays engines are much different than two stroke (fuel/oil mixed) engines.