I am not sure about destroying attachment. Btw, you can fix Workstation wobbling by tightening smallest "golden" screws.

Wow, I’ve had a Dremel for years and could have used this jig many times. Guess this is my next project. Thanks bud. Great video, much love from Canada 🇨🇦🇨🇦

That is AWESOME! I've watched so many woodworking videos where guys have thousands of dollars of equipment and now you're showing me how to do the same things they do with the Dremel on my hobby table. Thank you!

Few months ago I started to create some wooden jewelry and small stuff like that... I equipped myself with Dremel accessories and seeing almost all of them in your video makes me saying I didn't do so bad choices finally :) Pretty good idea that smaller router attachement! Will probably look to do the same now! 🤘

You make it look easy. You seem to have every accessory for the Dremel, there is. I just got mine, so am like amazed by the sheer amount of accessories, there is.

I hope you make your wife everything she wants and needs. I also hope she appreciates you. You're AMAZING. I'm going to follow you and watch ALL of your videos.

Thank you Thomas... Very good way to teach how to use the tools; and especially how to calculate measures before starting any project. congratulations on my part, carefully Bernardo Unda (Venezuela)

Dremel workstation is great, modding stuff and the station itself is what it’s all about, awesome work on that piece of acrylic!

ok...this attachment is way cool, way better than the original. thanks for sharing your work

omgosh that came out Great. lol now you know lve got to make one ! your sooo smart thank you so much for sharing !

Awesome , just started out to make one with the same device . glad I caught your video . you showed me how . very cool .... thanks for sharing .I think what I will do with mine is install 2 mini control handles .

Great work it turned out great may have make something similar. Cheers Tim from Wood 4 Nothing

that was very satisfying, thank you :D

Wow.

Great work and awesome video I clearly consider as one of a kind art that really made me enjoy watching :)

Fantastic work thanks for sharing

You have steady hands, you should take up sewing. Thanks for sharing this video. I'm inspired. I love what you're doing! I have no idea what you are doing but I love it! I'm a women inspired. LOL

Great work!

That's is a fabulous mod !! Thanks for sharing.

nice stuff man. I just subbed to you. was looking for a plunge router attachment for my dremel to make a keyboard case. more to you man :)

Nice work man!

well done! ive modded my dremel plunge router to be inverted and acts like a table router/shaper.:P much easier to use , can setup any type of guide on the table surface for follow , . 2 screws and turns back into a handheld plunge router.But , better and more effective flipped and used inverted as a table setup. . Its quite "bulky" for a dremel powered plunge router. The big one , not the little screw on one.... love your design you've modded. may copy this:PThe little "black" screw on handheld one is crap with horrible surface (as its a round circle , without any flat area) , so you fall off edges of projects constantly with it... your design solves this.

Wow you are great. Thank you for sharing

Really great video. Quite ingenious ! thanks I use a Proxxon rotary tool which doesn't have the threaded nose cone that the Dremel has. Any idea if, without the threads, I'd be able to attach the Dremel router accessory to my Proxxon? Thanks for any suggestions : )

What a great video, using a dremel to make a dremel tool. Now I want a dremel. You say that the 4000 model, thats what you recommend, I want that workstation think looks ideal for small wood working projects.

Great job. you pretty much have the full range of all dramel. Same here, I replace most of the big tools with dramel since I mostly working on small project. Scroll saw replacing the huge band saw... etc. BTW, one question, could like put a link on where do you get the bits that you use to drill matel, glass...? Keep making video like this. it is inspiring.

thanks for sharing your work. big thumbs up sir

EXCELENTE MAESTRO MUY UTIL MUY BONITO Y MUY BARATO : - ) : - ) : - ) : - )

Äijä on kyl oikea kone itsekin! 👍👍👍 Sukua Macgyverille😆

very nice

Bueno, sin palabras !!! Eres un Crack !!!!

Work smarter, not harder - loving it

I was looking at buying this little Dremel attachment but I noticed that the contact surface was a flimsy plastic rim. This is the perfect solution for that. There's probably even a market for it. Your demonstrated use was exactly the niche it would fill, fine work too delicate for small hand routers, but consistency of a stabilized tool. A bit of video advice though, always show your finished product first before you show how it's made.

Well done sir!

Simple y practico, gracias por enseñar . Hago casitas de muñecas y barcos tengo todas las maquinaria de Dremel, sus trabajos y consejos son muy útiles.

nice! You got all the dremel stuff! How's the drill press?

Thanks for the video. In the future you can just use a torch to polish the acrylic super fast.

That is awesome.

Nice mod. Can you tell me how you control DOC or depth of cut? Thanks

Nice One !!!

Dremel fanboy, a great project

Man, that's freakin' brilliant!!!

Very cool.... cheers from Australia

This is so cool , please tell me what dremel you used to polish it with?

Absolutely Brilliant. I wish I had one of these plates a couple of weeks ago when I was struggling with a project. I don't suppose you have a 'Template' you could publish, so that us less talented people could piggy back on your Genius??? ;0

wow i been looking for something like that if you make them ill buy onr from you.... seriously i would.

Exelente job

very nice!! What would it take to make me one?

Very cool. 👌🏻

The attachment that comes with the multipurpose and tile cutting kits can be used like this though they are not as wide so are probably a little less stable.

I tried what you did with a Dremel plunge router base, but I still got a lot of vibration, which wasn't so good on my hands and/or the work. I prefer to use a trimming router instead, the weight and the speed allowed for a better product.

Will you send that one right there? I am a beginner,you make it look easy! I know I can do wood inlays!Like your clear base tho!LOL

Exelente Master

amazing great video

Hello, vêtu Nice job! :) do you maybe still have the the dimensions to make it? Thanks

what is the difference of making the heart with the base of methacrylate or workstation 220

how good is the Dremel work station? and what is the dremel tool you use to cut the clear piece. I have a 4200 dremel

very nice. what cutting tool are you using, one of the router bits?

Näppärä peli. Hienosti toteutettu.

Dremel router plunge base is only 25 bucks and way more versatile, they also have a router base that is wider and more stable than using the circle cutter attachment than the home made version.

Fantastic

What is that "light nozzle" at your Dremel? DYI or do you have a link where to buy?

Isn't the drill press sturdy enough to just do the job right on it though? Nice job btw

Interesting to watch

So cute..... Dremel makes baby tools. :p

Awesome!!!

Dremel already makes a router base. Has a calibrated depth adjustment. My 3000 came with it. Problem?

awesome build T.S. quick? is that Polycarbonate? or?

Kudos!

Can you tell me if one can use dremel routing bits such as the 618 Chamfer bit with the workstation?

You don't need to explain things when you are explaining things, just explain things. We cool.

I'd swear you work for dremel. all tools seem to be from dremel., haha. excellent video.

The dremel attachment that you started with looked like a circle cutter. Where can I get one of those?

Is the depth adjustable of the line and circle cutter attachment?

nice ;3

what is the light on your dremel? is that an official attachment?

Saluted

I almost expected Charlie Chaplin to Pop Out!!

when you're cutting the plastic what speed and what blade are you using? thanks Julie

What is that Light nozzle at around 08:30min.

Dope as f$&@. I want one

Dear friend, how do you use 6mm drill with dremel?

Yep. This is pretty legit.

I'll buy one if you make it for me!!!

Whats the name of that bit called? @6:03

i just love watching shit getting done

great ! can you share a ready to print pdf file ?

I wasn't interested in what you are making but in how you use the router

Tuomas Soikkeli Do you sell these? Id like to have one....Thanks

Your onto something Tuomas ,why don't Dremel make all their base attachments see thru?

how dose the mini Dremel pressure drill cost?

Don't s'pose you sell those?

cant you just use Dremel 335 ?

Blood in your thumb?

Great! Only problem is you need a router to make one :D

You should sell the pattern.

You could have taken a second to show how you had to dismantle your saw blade to get it through the drilled hole to make the circle cut.

Did you make that in one sitting? Because you forgot to show us when you’re drinking coffee, eating lunch, and sleeping.

What RPM level on a Dremel 4000, were you using to route /sand/polish. I just bought one and new to this kind of work. I already have the Workstation. Considering the Scrollsaw and the Router Table attachments in the future. Thanks a bunch, Jon Frost-4113-348-0591

1. 9:05 - Why glue it when, without glue, you could unscrew it and use the original circle cutter again. 2. 9:14 - What's the purpose of the springs? The depth is being set by the circle cutter piece so I can't figure out why this would need springs.