Simple Battery Box! The RedODO Group 24 100Ah LiFePO4 battery

No video

Simple Battery Box! The RedODO Group 24 100Ah LiFePO4 battery

Рет қаралды 3,483

Күн бұрын

Today we build a very simple RedODO Group 24 100Ah 12v battery box to power your portable operations! Check out these links for the ingredients and tools needed for this build:
5% Discount Code for Official Website: TO
👉 Redodo 12v 100Ah Group 24 Battery: www.redodopowe...
👉 Redodo Amazon Link: geni.us/uhjFPA
👉 Noco Group 27 Battery Box: geni.us/9yyw4T
👉 Noco Group 24 Battery Box: geni.us/KVeidJ
👉 5pk 12AWG Inline Fuses: geni.us/tSuMq
👉 Yellow 12AWG Ring Terminals: geni.us/ADTCY4g
👉 Power Meter and USB Charger: geni.us/wZBiuB
👉 PanelPole2 PowerPoles: geni.us/0BHoc
👉 2 Hole Panel: geni.us/e1Nu
👉 MC4 to Power pole adapter cable: geni.us/MSzxb
👉Victron Solar Charge Controller: geni.us/3tzYKy
Tools:
👉 Kaiweets Stripper: kaiweets.com/p...
👉 Terminal Crimper: geni.us/tODiD
👉 Powerpole Crimper: geni.us/vVfp
👉 PowerPoles (Loose): geni.us/cTgAZ
👉 Gerber Rescue: www.avantlink....
👉 DeWalt Impact and Drill Kit: geni.us/RYVQpDL
👉 Milwaukee Packout Toolbox: geni.us/xyHg
👉 USB Dremel: geni.us/YACqC3k
👉 Renogy 500w AC Inverter: HA!
👉 Hakko Wire Cutters: geni.us/EKly9KJ
Click the 👍 Like Button, 🤡 Leave a Comment, ❤️ Subscribe
👉 Support The Channel 👈
❤️ Patreon: / temporarilyoffline
📺 KZfaq Memberships: www.youtube.co...
💸 Tip Jar: paypal.me/temp...
🧰 Gear I Use: kit.co/Tempora...
🛒 Amazon Link: www.amazon.com...
📻 $15 off at Radioddity: radioddity.refr...
🖍️ How I make my Thumbnails: partner.canva....
⚡ Meter I use in my videos: kaiweets.com/?...
👉 Fun Stuff 👈
🫵 We want YOU on TOADs Discord: / discord
🕊️ Twitter: / kilomike9golf
😸 Github: github.com/Tem...
Where possible, all links are affiliate links, this youtube thing is an expensive endeavor and every little bit helps.

Пікірлер: 77

@temporarilyoffline Ай бұрын

Based on a few comments I just went and checked - the USB socket is off until you press the display/on button. Thanks for looking out!

@jackK5FIT Ай бұрын

Simple, functional build. Nicely done. We have the same type wire stripper and crimper. You should check the usb outs to make sure they aren't live. I have a similar one in several boxes and it's live all the time. I added another small switch inside the box after the fact, just to kill the usb outs.

@temporarilyoffline Ай бұрын

Based on your comment I just went and checked - the USB socket is off until you press the display/on button. Thanks for looking out!

@suneelkanuri 27 күн бұрын

Love your setup

@temporarilyoffline 27 күн бұрын

Thanks!

@ericks1979 Ай бұрын

9:54 hey we got the same dremel!

@temporarilyoffline Ай бұрын

Pros!

@KE8MWQ Ай бұрын

I use a step bit for my power box builds works great. Thanks for the video

@temporarilyoffline Ай бұрын

My step bit wasn't big enough! 😳

@Mandarin110631 Ай бұрын

great thank you!--it gives me confidence i could make something like this

@temporarilyoffline Ай бұрын

You could, start small and build confidence and skills

@ChrisKD9YSW Ай бұрын

I like the simplicity I will probably modify it a bit with mine and only running maybe a 30 ah battery

@temporarilyoffline Ай бұрын

Great idea! Would love to see your finished box!

@robertmeyer4744 Ай бұрын

Nice box. !00 AH now you can run 12V coffee pot and plug in ham radio. I just got NOCO battery boxes just came today from brown truck ! But I got the group 31 bigger one and 2 GC2 ones for big battery. For RV install. The 100 AH with power queen I made has Main disconnect switch and fuse. Just #4 and #10 wire . They have them inline fuse holders in 10 AWG and 8 AWG as well. The #8 is a MAXI fuse. That stuff came Sunday amazon. for the holes they are 1- 1/8 in hole. I have right size bits. also hole saw and step bit. I do this very often. I have same yellow tools ! and some red tools with yellow battery and green tools with yellow battery. Adapters allow different color battery on different tool. A small wood block holds battery from sliding around. the packing foam the battery comes with works as well. just trim to fit and have room for storage. piece of foam on top of battery and battery stays in place. The RV I did with it outside in the box , I packed foam all around battery ! . insulated battery box ! and was a low temp LiFePO4 100 AH. 73

@temporarilyoffline Ай бұрын

I love building battery boxes

@robertmeyer4744 Ай бұрын

@@temporarilyoffline I bult many. no 2 alike and all work. most not for me

@dougdaniels Ай бұрын

I've built a few of these, even one in a Zombie box after seeing your video! I find using a RigRunner (or knockoff) instead of multiple fused leads makes it much simpler and neater, only one cable from the battery. Plenty of room to mount on the inside of the cover.

@temporarilyoffline Ай бұрын

Agreed! I was going for "Simple" in this build. I have another idea for a new build coming up. Stay tuned!

@GordonHudson Ай бұрын

The simplest battery I ever had was a 10x AA battery holder with Nimh cells in it. It powered my TX500 transceiver for 4-8 hours, although that radio had very low receive current. I recently bought a Jackery power pack and solar panel in a sale. It's the current lifepo version. It isn't cheap, but it does everything. I can power my G90 from it for nearly two days. With the solar panel attached it's pretty much infinite. It's not lightweight though.

@temporarilyoffline Ай бұрын

By TX500 you mean LAB599 Discovery TX500 or some other TX? Pretty cool to carry the NiMH forward! That G90 is "the sweet spot" of radio, good price, low power draw, functional

@GordonHudson Ай бұрын

@@temporarilyoffline Yes, the Lab 599. I had one of the first ones they made. I did like it but the connectors made the practical side difficult, also lack of an internal ATU.

@temporarilyoffline Ай бұрын

@@GordonHudson no internal ATU is how they get ya!

@GordonHudson Ай бұрын

@@temporarilyoffline I still use resonant antennas but I can cope without returning them every time.

@hamradiowithkevin Ай бұрын

That is a perfect setup Steve. I like that design. I need to make one

@temporarilyoffline Ай бұрын

Super simple, room for expansion! Thanks for watching!

@paulbunt1708 Ай бұрын

Not only are you using the impact driver, but you have the magnetic bit on the end of the quickconnect.

@temporarilyoffline Ай бұрын

I did say "simple" - and that's harsh man, I'm "drilling" into plastic! I did at least switch over to the drum sander in the drill motor when the dremel died.

@DonzLockz Ай бұрын

Looks good Steve. I hope your sponsorship dreams come true.😊

@temporarilyoffline Ай бұрын

You and me both!

@Steve_AI7SV Ай бұрын

a 1-1/8 " hole saw will make the hole, no adjustment required

@temporarilyoffline Ай бұрын

Sure will! Didn't feel like digging it out and messing with it. Probably should have in hindsight.

@stahpit1971 Ай бұрын

Very nice 👍 much cheaper to build the see than buy the ready made and you can have only what you need

@temporarilyoffline Ай бұрын

Exactly!

@victorcharlie7491 Ай бұрын

DeWalt, send him some Forstner bits..smooth and quiet! i attach an inline fuse to my foot when sleeping ,it helps jump start me in the morning, nice box!

@temporarilyoffline Ай бұрын

Imma have to try that fuse to the foot trick - but I need to put it in backwards so I stay in bed longer.

@jslawsby_W5GI Ай бұрын

Great build! Looking to do something like this but want to make sure I can add a handle

@temporarilyoffline Ай бұрын

A handle is a great idea - there are other battery boxes on Amazon, I bet you can find one with a handle

@jslawsby_W5GI Ай бұрын

@@temporarilyoffline went with a Rigid 22” box. Going to start build today. Is there a downside to using a fused Anderson distribution block to run power from the battery to the different plugs as opposed to running them all fused directly to battery. Was just thinking it might help me with wire management.

@temporarilyoffline Ай бұрын

@jslawsby no issues at all using a power block. This was a "simple" build example and I have a more complex build where I used one of those myself.

@TheTdub Ай бұрын

Nice video TO. Why did you put on the "escutcheon" plate(that is what it is called) for the receptacles? Couldn't you have just secured them into the box top?

@temporarilyoffline Ай бұрын

It's like a window without trim! Yeah, perfectly fine with out it.

@KeepEvery1Guessing Ай бұрын

I would have gone with 30A fuses for the power pole outlets, since many 100W radios can draw 22 or 23 amps on transmit.

@temporarilyoffline Ай бұрын

Great idea - folks gotta read their manuals!

@jameski5oeb668 Ай бұрын

@@temporarilyofflinebesides the PP30 socket is rated for it as well. 25 amp might be better, up to you.

@KK6USYHamRadioAdventures Ай бұрын

Nice build Steve, I am doing something very close but different

@temporarilyoffline Ай бұрын

Looking forward to seeing it!

@alessandroconcas Ай бұрын

Great build, I do similar but with victron have a too much noise on hf band in my case so swtich to genasun and resolv 99,99 of problem

@temporarilyoffline Ай бұрын

Excellent!

@don_n5skt Ай бұрын

Just add a Victron shunt so you can monitor your battery health via Bluetooth when not charging it. Also Redodo sells a battery box that fits the mini 12V battery. That is what I got. Has a handle and for safety, it provides a strap around the box so it does not accidently come open. I found it to be a good start and have added solar, PD charging and a more colorful battery minder. Got the shunt after watching Kyles video. Does your code work on the battery box I wonder?

@temporarilyoffline Ай бұрын

Discount Code should work - I kinda want the shunt, but the charge controller has some of that same functionality built in.

@RobB_VK6ES Ай бұрын

You missed any form of battery restraint. Important to prevent the battery bulldozing into the fittings and fixtures.

@temporarilyoffline Ай бұрын

Good tip for anybody doing serious ham radio!

@k6usy Ай бұрын

You need a 1-1/8” bit for those holes, I just had to buy one to add a hole in my battery box. Next time read the instructions :-)

@temporarilyoffline Ай бұрын

Instructions?

@k6usy Ай бұрын

@@temporarilyoffline those panel mounts have spec sheets that will tell you what size hole they need. Shoot you can also find that info on the Amazon listings.

@temporarilyoffline Ай бұрын

@@k6usy that was sarcasm.

@k6usy Ай бұрын

@@temporarilyofflinethe internet doesn’t translate sarcasm.

@ky4rod Ай бұрын

Steve - Beware of those USB chargers with displays. I built 2 boxes with those style chargers that I got from Amazon. I thought the same way you did, that the power switch turned them completely off, it does not. The switch only turns off the display but leaves the USB chargers powered up. The USB chargers remain powered, so there is still a parasitic current draw on them that will slowly drain your battery. This may not matter much to you with such a large 100aH battery, but with a 15 or 20 aH battery that it is significant. I ended up rewiring both of my boxes with a power switch between the usb chargers and the battery to turn the USB chargers off completely to avoid battery drain. Maybe your chargers are different than mine were other than that 1 small item to be aware of that's a very nice box!

@temporarilyoffline Ай бұрын

That's a good find. In my smaller battery box I do have a "master switch", but I was going for simple with this box... maybe a bit too-simple.

@RodMilligan7 Ай бұрын

@@temporarilyoffline It probably doesn't matter much with that being such a large battery. I had 1 box with a 15 aH and another with a 20 aH battery and the battery charge would drop from 14.2 to 12.6v over a period of a about a month. I initially though it may have been the battery BMS causing it I disconnected the battery and the charge only dropped about 0.1 to 0.2v and then I noticed switching the display off did nothing as far as the USB charging. It seems kind of a stupid design to me to only turn off the display and leave the charger still active. After installing the power switch the problem with the battery discharge went away. I stored my boxes over the winter and the voltage only dropped from 14.2 to 14 over a 6 month storage period.

@temporarilyoffline Ай бұрын

Based on your comment I just went and checked - the USB socket is off until you press the display/on button. Thanks for looking out!

@ky4rod Ай бұрын

@@temporarilyoffline That's good Steve. You obviously have a higher quality USB charger/meter than the ones I bought off Amazon, obviously it must differ by manufacturer. You just never know sometimes what your getting when you purchases stuff like that off Amazon (as they say "your mileage may vary!")

@temporarilyoffline Ай бұрын

@@ky4rod exactly, I bet even getting this exact unit again might have a different way of working.

@ozone385 Ай бұрын

Great build TO. I have a 50ah battery with up grades after i get used to them. What solar panel is that in your video, does it fold up for storage/transport? Thanks in advance.

@temporarilyoffline Ай бұрын

That's a 200w flexible panel - iallpowers.com/products/allpowers-sf200-flexible-solar-panel-200w?ref=rjqlvc69 - it doesn't fold up at all. Do you know what size you are looking for - I have a few fold up panels from 60w up to 400w.

@ozone385 Ай бұрын

@@temporarilyoffline I was looking at a 100 watt fold up to use at pota. I am going to get the same controler that you have in this video.

@temporarilyoffline Ай бұрын

I have used this one: iallpowers.com/products/100w-portable-solar-panel-charger?ref=rjqlvc69 which folds up pretty small for a 100w panel and then this one that is less portable: iallpowers.com/products/suitcase-solar-panels?ref=rjqlvc69 - The small foldable panel is in this video: kzfaq.info/get/bejne/o8tpf6t529W6dYk.html

@K6WRF Ай бұрын

Ive seen multiple videos that talk about these solar battery boxes, and charging them via solar but never mention charging it back at your shack or elsewhere .. what would you recommend to use to charge it quickly without solar. Like a noco charger and just connect it to one of the powerpoles? or directly from your shack PSU? I saw in your Build your own you mention the bioeno charger and your shack PSU and connecting it to the PowerMini2. What if you didnt have a powermini2?

@temporarilyoffline Ай бұрын

Your Shack PSU (unless you can dial it up) won't put out enough uumph to fully charge the LiFePo4 - it will get you close enough to be usable, but a better option is a real charger - for smaller batteries, the bioenno charger works: geni.us/qbN9 for bigger batteries I use a 40a charger: ipowerqueen.com/products/power-queen-14-6v-40a-lifepo4-battery-charger?ref=temporarilyoffline