Amazon links to relevant products are in the description.

I frigged around for an hour trying to pry this thing apart, armed with nothing but primal 'man skills'. Gave up after a lot of cursing and skinned knuckles. But now I just found this simple HOW-TO and can see now that I completely missed the underside bolt. _CURSE YOU, FORD DEMON!!!_ Also it was dusk and I didn't have a torch so I was screwed regardless. Thanks Craig!

Absolutely spot on video. No other update by anyone should ever need to be made. Thanks a million

It shouldn't be this annoying to replace a simple headlight bulb... Thanks a lot for this video, it helped a lot

Lovely and very useful video. One small point regarding the removal of the low-beam lamp; pull off the electrical connector BEFORE you undo the lamp retaining clip.

Very thorough video. I've changed the headlights on my focus twice now in situ and I've become quite decent at it. I can change them both in 5-10 minutes now, but the first time it took me nearly an hour to get the clasp on the left headlight to click back. If you don't have the tools to remove the light, i'd suggest working on the right headlight first and taking a good look at how the clasp clicks into place, then tackling the left.

Top man! With your help I have successfully changed the left hand light on my focus mk1 - this is the first thing I have done on the car myself. You have saved me a trip to the mechanic and I have learned something. Thank you very much!

Absolutely brilliant presentation; clear, thoughtful and easy to follow. No stupid unnecessary annoying music either. Thank you, thank you, thank you.

Don't often comment on videos but this one really helped me out. I've seen videos before where the battery has to be removed but this made it so simple. Only problem I had was trying to remove the power connector (which I thought would have been the easiest part!) so I just replaced the bulb once the headlamp unit was free. Thanks!

I was absolutely dreading this. I've tried to change bulbs before which normally ends up with me swearing profusely at the car for about an hour then taking it to Halfords the next day for some 12 year old boy to replace it in 30 seconds, but this time I was determined. I watched this video and left the house feeling prepared as much as I can be, but with low expectations of success. After 5 minutes I had changed it. In the dark. I had only gone and bloody changed the light on my own. I hadn't felt this level of euphoria in a long long time. Sure I'd cut my hands a few times and probably got a bit of oil on the bulb, but the bastard was in. I turned on the ignition to bask in my glory only to find the bulb I had replaced was faulty. It was a low point. I knew there was no way the second time would be this easy, but I was wrong. I couldn't believe it. I popped out the bulb and then popped another in within 5mins. The only really difficult bit was getting the cover back on, but it went on in the end. I am so happy. I am awful at these things, but I did it.

I think you did an excellent job of showing how to get it off and how to get it back on. The detail of taking a light out of its socket and putting a light back into the socket That's a little more difficulty in would have been a little more helpful A reminder when you're messing with light bulbs that you need to have a pair of gloves on or a handkerchief to make sure that the bulb doesn't have your moisture on it to blow out fast Again I'm telling you you're done an excellent job of what you've shown and you had a good atmosphere of how you said things across to us and I think that was very good too

Found this extremely helpful and so much better than all the other vidoes I could find on youtube. Thank you Craig. Given me the confidence to have another go after giving up because I just couldn't see what I was going.

Thanks a million - I changed both in under an hour - would otherwise have wrecked something trying to work out how to do it. Greatly appreciate the clear instructions in your video.

Well done Craig, you tips and directions are spot on. It helped me get there especially the bolt to the underside of the head light.

Excellent video and presentation. Wouldn't had been able to change it with this video. Really enjoyed do this on a wet Tuesday. Thank you very much Craig!

This was spot on. Thank you for taking the time to film and assemble this video.

Thanks man! You helped me. I also tried to change the bulb without removing the headlight. It ended with a clip in my hand and I have to remove the it. Using your guide helped me alot and now I have a working bulb on the left. =)

perfect manual! Followed the steps and managed to change the bulbs all by myself. thank you for that video it was really, really helpful last saturday! My Ford focus is shining again :) Greetings, Rina from switzerland

Great video, thx!! I've just bought my mk1 Focus Turnier, and I'm looking for these type of DIY videos. Greetings from Hungary. :)

Thanks Craig. Changed my 2004 Zetec today. Couldn't have done it without this.

First class video Craig, really helped me understand what to do. Thank you.

I did exactly what was posted on this before watching it .. removing the headlight on the left side is the easiest way of getting to the dip beam headlamp ... I wish I had watched this first , would have saved me time but I would have lost out on my brain working it out :-)

Thank you for a very helpful video. For a moment you got me disappointed that I would have to take out the whole headlight assembly just to change a bulb. What kind of car it is! But fortunately, I did not need to do that. And very good point about wearing gloves and not touching the glass of the bulb. Perhaps that's the reason why I had them burning out prematurely in other cars!

good video really helpful. I had a friend who told me the headlights were a bugger to get out and u had to pull the front bumper off to get to the 3rd bold under the headlight so saved me a lot of time and effort. thanks

Excellent tutorial for beginners like me. Clear and concise directions

Than's for this.. was stuck feeling for the clip on top of the light until I realized it's actually on the side.. after that it was a breeze to take it out. Had some more trouble due to previous owner having installed custom xenon lights, so the original switches and all that were replaced with custom stuff, but this video got me trough the main part.

VERY thorough instruction video! And very well done. I had great problems today w my bulb change so this video was 100% helpful. Thank you very much! 👍🏻

Great video - was struggling then watched this & done 10 mins - thanks very much !!

Thanks Graig. Best video on KZfaq for replacement Light. 👍

Excellent no nonsense expose of how to do it either way. Well explained and clear as. Thanks a million.

Thank you very much for your helpful video! After seeing your video it was possible for me to know the parts and change the right bulb without taking the headlight out. It was just needed the cellphone camera to see what was my fingers doing. It is really hard to change that lightbulb without knowing the parts. Thank you

So pro guide. You have anwered my all questions. Great job man !

Excellent presentation, lots of detail, perfect, thanks.

Just to say thanks for the video. I found that unplugging the wire from the back of the bulb before undoing the clip made it a whole lot easier to get the bulb in and out. Haynes says to do it that way too.

Brilliant video; this is just what I needed. Thank you!

Thank you for a brilliant video, very professionally presented and great vid quality, it was the H1 I was hoping to see changed, but still very helpful for removal of headlamp etc, well maybe its because I am a frustrated mechanic that I changed both the dipped headlight bulbs and sidelights in situ in 20 mins for BOTH sides in total, seriously, the locating tabs on the cover plate is a real pain, took me longer to locate the cover than changing the bulbs, so I removed the locating tabs and now can replace the cover in seconds !

Great video. Excellent that you gave a plan B (which I needed). Car good to go. Thanks!

Brill video, without it would probably have broken something luckily I had the driver side bulb to replace took me about 10 mins .. I did it in situ with a penlight torch so I could see Best tip was checking the bulb through the lense to see it was seated correctly A flat blade screwdriver in the harness connector was easy just slide in and twist gently to release tab then pull backwards... thanks again for a well made and informative video

Thanks! Your help spared me a lot of trouble!!

Thank you a lot for this video! Helped me a lot changing the headlight! Was a bit different on my german Focus, but was very similar :)

thank you for showing that I was struggling on my wife's car ! top work

Nicely done. 3 x M6 self tappers for each headlight (one of which from underneath) then 2 x M6 for the front grille. All easily done with a 10mm socket and ideally a 10mm ratchet wrench for the underneath. Jacking up and using one axle stand on one side only is plenty enough for access underneath both sides (that, or drive up a couple of ramps). ** For the ST170's fitted with Xenon light option you will need to remove the headlight unit to change either the Xenon bulb or the main/full beam bulb - they cannot be removed with the headlight in place. N.B. The main/full beam bulb on the ST170 fitted with the Xenon light option is an H7 fitting (not H1 as is in the standard headlight).

Many, many thanks sir! I've tried changing H7 on my brother's Focus MK 1 a few days ago and couldn't even take off the black plastic cover. I didn't know that it has two plastic bits on the upper side and that you have to pull it down a bit after releasing the metal clip on the bottom side. From the standing point in front of the car it's extremely difficult to see anything. You mainly rely on touch instead of sight and if you don't know where each part is, you're scr***d. Thanks a lot once more!!

Sorted, many thanks for posting this video - Very helpful.

Brilliant video. I sorted my light out. Thank you.

Thanks a lot! Saved me a trip to the garage. Thumbs up!!

great video. good shots and clear instructions.

Just about to do a bulb change, very informative video.

Excellent and very help full, today a needed this video 👍👍👍

Excellent video - without it I'd have struggled for ages, replacing a parking/side light bulb. Ford must have used their "Friday p.m. B Design Team" for this bit of their Focus design!

thank you! helped alot when doing the headlight where the battery is

Brillant video and instructions ! thx a lot !

Great tutorial. Couldnt have done it without the help. The space to work with otherwise wouldve been impossible

And now I have working lights. Great work.

Very clear video thanks Craig

Thank you for this great video.

wonderful video, very complete and also gladly, thank you my friend

Thanks, this really helped me, that hidden bolt under the bulkhead is a sod if you don't know it's there, why do the manufacturers make simple jobs so difficult, even the trade complain about this sort of fiddly time wasting job, they have in fairness made it easier on the later models, but you really wonder why something so safety critical should be made so unnecessarily complex When you might have to do it on the roadside miles from anywhere without help....

I have a focus mk1 for 11 years now and i can change a bulb in under 1 minute. The thing i changed was that the connnector is not entangled with the hook. This works much easyer. The connector can be placed after the bulb install. You have way more room like this.

Dogs bollocks mate Sending you a beer, Thanks for that 😊

thank you my friend very helpful great stuff .

Thank you very much for the video, very very useful.

Thank you, made it so much easier!

Nive video mate,very helpful!! Thank you very much!

Great tutorial! Thanks!

great tutorial Thanks Craig!!!!

Thanks man, you helped a lot!!!

Great video and it helped a lot

great stuff very good instructions thanks

Thanks for your help, still a ball ache to do! But very, very helpful :-)

cheers and thanks for showing both ways

Thank you so much, sir. God bless you!

Superb You have given correct information

Complimenti per la bellissima spiegazione, io posseggo la stessa autovettura, l'altro giorno mi ero messo a smontare il faro proprio quello vicino alla batteria, è dopo aver smontato le due viti di sopra, il faro non usciva poiche' c'era un terzo bullone che va' svitato da sotto, adesso mi è stato chiarito con questo bellissimo video, quando posso tempo permettendo mi mettero' a sostituirlo, solo che c'è la difficolta' che uno si deve sdraiare per terra, grazie per la bellissima spiegazione.

Great Video, Thanks!

Brilliant vid. Saved £8 @ Halfords/discovered previous owner botch of not replacing cover/seal. Smugger than a smug thang - many thanks......

great vid after watching this i managed to change mine within 15 mins :)

Helpful! Thanks 🤙🏼

Great job, thank you !!!

There are a number of comments that seem to be jumping the gun before watching the video (or reading the desc). To be clear, you can do this with the lights in situ, it is possible - but the LH side is difficult, especially if unfamiliar with the process, and it is much easier removed. So the video shows *both* ways.

thank you very much, would you know the specifications of the fog light bulb?

Thank you - very useful indeed 😊

Thanks! Very helpful video. With your aid I had the job done in 5 min (easy side). It's absolutely doable with a mirror. My problem was that the clip fell out and I couldn't figure out how to position it :)

Thanks that was really helpful

Thanks you save my day!

very helpful, thank you

Saved my life!

How did you extract the leveling actuator? After rotating the body and releasing it.

I changed the left sidelight bulb in situ but it was awkward. I took the two top screws out that hold the headlight which gave a little more wiggle room. Thanks for the video though, I at least know about the third screw.

Great video ! I've had a Focus since 2003 and it's still running thanks to proper care and maintainance. I have to say that headlight bulbs seem to fail with monotonous regularity despite taking every care with installation as in your video. I always managed to replace them with the headlight unit in situ however, pain in the ass though it is !! As car technology strides on, the manufacturers seem to make it less and less possible for DIY repairs and maintainance, even such mundane things as changing a bulb ! Whether this is deliberate on their part in order to channel more work to dealers / independent garages is hard to say. It wouldn't surprise me though.

Brilliant video, thank you. I wonder what kind of ugly stuff Ford designers were smoking when designing this... 🙄 This should have been an easy access panel. I remember in my previous car, a Renault Clio from 1999, it didn't took me more than 2 minutes to change ALL front bulbs from both sides.

What number is the right headlight fuse in focus 2005 lx

Thank you. I have to replace both units.

Hello, i have one big question... @ min 13:30, that plastic wich cover the bulb... how can i put it back because at me it falls down in headlight. Is any king method?

thank you - very helpful -

Excellent.

Watching this video and headlight on a bench helped. But did not remove headlight to change a bulb, for me removing battery was enough to change low beam bulb in Ford Focus MK1. If in doubt you can practice to remove and install back broken bulb without touching glass part of it. If success change it to a new bulb, if in doubt, go ahead and remove headlight as shown in this video and then install new bulb. High beam bulb was even easier to access (when battery was removed). Not sure about right side, I will change it when it will burn out. It is easier to remove and install bulb when wire is disconnected, especially if you try to change bulb without removing headlight.

Thanks for the manual how to do this. As I tryed it the first time on my own I completley missed the small metal clip holding the bulb ... I was wondering so much what is the problem. Now with your video I know how to handle this thing. Thank you so much! :) Kind regards from Germany

What indicator bulbs does this take please

Well explained what bulbs can be put into the lower fog lights on Ford Focus to make them brighter ?