Simple knife making with an old saw blade

Рет қаралды 1,460,602

Жыл бұрын

Looking for a new knife? Something fun, different, and completely unique? That's what we thought, so we went ahead and made one. Check out how easy it is to make one. Get your saw blade from the hardware store and follow these tutorial.
I try to show all steps involved in this video to show you how to make a knife from an old saw blade. This is a great way to repurpose some old junk and make a useful tool for your household. You just need the blade of the saw, some sandpaper, grinding wheel and angle grinder to sharpen it.
The large finger hole on the blade provides a secure grip for wonderful management whereas filleting fish, chopping vegetables and deboning meat.
Note: This is the first knife I made and I didn't heat treat it because it didn't occur to me that it should.
Handmade knife from old file, simple knife making with basic tools.
#Bushcraft #Rusty #restoration
Thanks for watching!
Please share this video with friends or anyone who might be interested!
Leave like and comment, don't forget to subscribe if you enjoy watching.
/ @woodworkcrafts
More videos in woodworking:
DIY Witch House Using A Tree" - How To Do It Like A Pro Step By Step:
• "DIY Witch House Using...
Building a Miniature Saloon! Unbelievable DIY Western Project:
• Building a Miniature S...
Wooden Combination Lock Build - Woodworking:
• Wooden hasp build for ...
Homemade Lathe Machine - Wooden Tailstock Lathe:
• Homemade Lathe Machine...
Making a coffee cup out of olive wood - carving a coffee Mug:
• Making a coffee cup ou...
Olive wood spoon made || tablespoon scoop carving:
• Olive wood spoon made ...
Making a knife From an Old Saw
Amazing idea from an old saw blade
Making a Knife from a Circular Saw-blade
From Saw Blade To Knife

Пікірлер: 126

@woodworkcrafts Жыл бұрын

Note: This is the first knife I made and I didn't heat treat it because it didn't occur to me that it should.

@mariorodrigues5796 Жыл бұрын

Com crtza ficou muito legal parabéns 🤟🤟🤟🤟

@namesmud9510 Жыл бұрын

aren't sawblades heat treated already? idk much about knife making though

@woodworkcrafts Жыл бұрын

@@namesmud9510 Maybe

@vladalex3876 Жыл бұрын

@@woodworkcrafts only saw teeth were heat treated

@woodworkcrafts Жыл бұрын

@@vladalex3876 Thank you for the clarification.

@juliaallen7149 7 ай бұрын

I was a little worried about installing the blade after reading a couple of reviews. But it was amazingly easy. Took about 1 minute. Works great kzfaq.infoUgkxjpBI8OOeUXib_iT7UomCrQ-uauwZJ62c . Cuts easily and is perfect for pocket cuts I needed to make for replacing some old deck boards.

@khnissitessnim4146 Жыл бұрын

the pinnacle of creativity🤩

@octaviusthecrafter Жыл бұрын

Got to love the angle grinding with flip flops.

@woodworkcrafts Жыл бұрын

Normal.

@said2968 Жыл бұрын

Parabéns você é um mestre

@andersonleal5077 Жыл бұрын

Ficou Top demais parabéns 🇧🇷🇧🇷

@staggerleesmancave8987 Жыл бұрын

Great video! And I love the profile/concept you came up with, even incorporating the hole of the saw blade! This has really inspired me to make a knife from some of my own old saw blades.

@woodworkcrafts Жыл бұрын

Don't forget to show me when you make it.

@deerslayer6419 Жыл бұрын

Good job for a first knife!

@Lee-wf7nh Жыл бұрын

Thanks 4 the tips I think I'll try making my own

@andreasporch788 Жыл бұрын

I’ve made several knives from this material light weight really sharp. The metal is hard enough. Yet makes good edge.

@laven111 6 ай бұрын

Beautiful knife well done .

@robertodeoliveiraoliveira546 Жыл бұрын

Mto show amigo Parabéns

@the_fafologist Жыл бұрын

Very cool.

@marcospinto2290 Жыл бұрын

Good Job. Congrats

@salmanpradita4969 Жыл бұрын

Keren mantap aku suka fidionya

@cpinedo 3 ай бұрын

Great work....

@vdsmade 9 ай бұрын

Great job 👊😎

@pholhan Жыл бұрын

That's great.

@SawForgeGarage Жыл бұрын

Sweet build and blade my friend.

@woodworkcrafts Жыл бұрын

Thank you.

@toebarsrealm3773 Жыл бұрын

Inspiring vid. Ive been saving old saw blades and wondering what i can make them into. Think ill try a knife. 🤔 TY!

@woodworkcrafts Жыл бұрын

Good luck.

@Tillychewz 3 ай бұрын

Not bad for your first one, better than my first one that's for sure.

@3stateKen 11 ай бұрын

Nice video. Like one of the comments said I too thought saw blades were heat treated. I thought leaf springs, spikes, wrenches and such only needed that. I would love to try this. I can handle cutting out the blade but putting on a handle would give me trouble.

@woodworkcrafts 11 ай бұрын

Good luck and be careful.

@AbhishekKannakeKannake-ze1io 9 ай бұрын

Super 👌

@tungngernmobile2794 8 ай бұрын

สวยครับ

@Rancherinaz 4 ай бұрын

Nice

@sundamahier8669 Жыл бұрын

Mantap sir

@smhization Жыл бұрын

Nice work, however always cover your blade with a paper or old cloth and then wrap some tape to avoid injury to your self while working, and to avoid scratches on the blade polish.

@woodworkcrafts Жыл бұрын

Ok, thank you.

@user-cd9gk7lj9p 11 ай бұрын

@@woodworkcrafts

@MWard-zk4wg 9 ай бұрын

Dude.......the only words that come to mind is doooode, this boys been making these for a minute! Awesome simply awesome. Any thoughts in heat treating your steel???

@woodworkcrafts 9 ай бұрын

No, I don't treat it.

@FkRoP 2 ай бұрын

I thought you were going to pull out the angle grinder to cut the scales out! Shame about the heat treat, but a good learning exercise for next time.

@stevemoore5053 Жыл бұрын

👍👍👍

@victorsantiago7367 5 ай бұрын

Saludos muy bonito trabajo voy hacer uno así que disco usastes la medida si se puede saber felicidades

@woodworkcrafts 4 ай бұрын

Thank you.

@randyames992 7 ай бұрын

What drill bit did you use? I can't drill circular saw blades with the bits I have.

@woodworkcrafts 7 ай бұрын

Maybe you should use another new one.

@randyames992 7 ай бұрын

I've tried that....I wonder if maybe a carbide or tungsten bit...I have also tried a masonry bit with no success

@woodworkcrafts 7 ай бұрын

@@randyames992 I use a normal drill bit and have no problem with it. Try with a stainless steel drill bit.

@randyames992 7 ай бұрын

I'll try that. Thanks so much for the feedback.

@Kevinhobbytime 5 ай бұрын

You’re having a hard time drilling because saw blades are hardened steel. If you heat the spot you want to drill with a torch to red hot and let it cool you can drill it easy. Dont get the blade edge red hot you will ruin the hardness.

@sempa-sho4142 7 ай бұрын

👍👍👍👍👍👍

@thephong123 Жыл бұрын

Quá tiệt

@santoswennekes6423 Жыл бұрын

Is a saw hardened steel or doe we first need to heat treat it

@woodworkcrafts Жыл бұрын

It is a saw hardened steel, and some say it does not need to be treated.

@lioncash5218 5 ай бұрын

❤🎉🎉❤

@asidqy6626 Жыл бұрын

Apakah pisau ini buat cacah tulang ga gombal om..

@woodworkcrafts Жыл бұрын

For chopping vegetables and meat.

@WinterIshere-tf5id Жыл бұрын

I tried cutting a shiny bandsaw blade with an angle grinder but the grinder just slipped off and it was very difficult. Can anyone tell me why?

@woodworkcrafts Жыл бұрын

Take care, the angle grinder is dangerous. It requires experience and good hand control. If you are a beginner, I advise you not to use it.

@randyames992 7 ай бұрын

Use as thin a grinder wheel as you can find. It will follow your outline much easier that a thicker wheel.

@josemora2149 Жыл бұрын

Que tamaño es la cierra tengo un pre creo es mas pequeña que la tuya quero hacer uno

@woodworkcrafts Жыл бұрын

Un poco menos de 30 cm.

@brysonalden5414 Жыл бұрын

Just as well you didn't heat treat it; most of the saw blade knives I've made warped like bananas even before the quench.

@woodworkcrafts Жыл бұрын

It's my first time making a knife and I didn't know it had to be heat treated, maybe next time. Thank you for your comment

@brysonalden5414 Жыл бұрын

@@woodworkcrafts I keep my first knife on my desk as a lesson in humility! Trust me, your first knife is way better than my first one.

@raresboghean2974 Жыл бұрын

Why not use stanless steel 317 its tougher flexibile durable than clasic steel that rusts and is fragile

@woodworkcrafts Жыл бұрын

Maybe later, thanks for the tip.

@musicgurufan8771 6 ай бұрын

This video get the steel from old saw blade. Where to get stainless steel 317 from?

@raresboghean2974 6 ай бұрын

@@musicgurufan8771 In oder to have a saw blade you need a chainsaw which is not that cheap by they way the cost getteing the blade is higher than buying a piece/bar of stainless steel for your project is not that expansive The cost of geting the stanless steel bar is overall cheaper

@Fizzure3000 Жыл бұрын

It's a cool blade but almost all my attention went to you using a HUGE angle grinder to cut out a SAW BLADE that being held by ONE clamp and you wearing shorts and sandals...jesus christ that's stupid dangerous

@woodworkcrafts Жыл бұрын

I take all appropriate precautions while grinding. It may not be visible in the video for you.

@Fizzure3000 Жыл бұрын

@@woodworkcrafts It is tho, everything is visable, including your one clamp and your shorts and sandals. You are lucky your angle grinder didn't caught the saw blade and have it fly off and chop your leg off

@bpdub21 10 ай бұрын

If you want to make a knife while wearing flip flops, make a knife while wearing flip flops!

@Fizzure3000 10 ай бұрын

@@bpdub21 And take the consequences for being an idiot and enjoy your cut off foot when it happens.

@Mac-tf5fy 9 ай бұрын

And that plastic table while cutting saw blade😢

@user-nw9hy9xg5v Жыл бұрын

Осы шебермен қалай ауызба-ауыз телефонмен тілдесуге болады?

@woodworkcrafts Жыл бұрын

You can by e-mail or Facebook page.

@justinhorn4246 Жыл бұрын

Do you not need to heat treat the blade?

@woodworkcrafts Жыл бұрын

I didn't know he needed that.

@marktate4466 Жыл бұрын

I have read in comments on other videos that saw blades are already tempered, I would like to know if that is so.

@woodworkcrafts Жыл бұрын

@@marktate4466 I also heard that and don't know if it's true or not.

@toebarsrealm3773 Жыл бұрын

Not sure if it needs it or not but, (from my unknowledgable perspective) isnt the metal already high quality with no further heat treat? Dunno.

@dereksteele2284 5 ай бұрын

@@marktate4466yeah, but the heat from that angle grinder takes the heat treat out of it

@anime3713 7 ай бұрын

🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰

@ernestocarig687 7 ай бұрын

Where we can buy those

@woodworkcrafts 7 ай бұрын

What do you mean by more? Can you be more specific?

@rubenorozco1766 16 күн бұрын

How much cost one of those

@woodworkcrafts 14 күн бұрын

I don't know.

@santichai7189 Жыл бұрын

สนใจ

@user-cd9gk7lj9p 11 ай бұрын

I prefer something that will not rust

@woodworkcrafts 11 ай бұрын

It is an experience above all.

@user-cd9gk7lj9p 11 ай бұрын

@@woodworkcrafts I had fun making knives with my neighbor. I learned about all types of knove making material. My fav is D-2 steel

@dereksteele2284 5 ай бұрын

That knife isn't going to hold an edge. All that heat from that grinder, and not tempering it? Waste of time

@woodworkcrafts 5 ай бұрын

It's not waste time, this is my first knife.

@dereksteele2284 5 ай бұрын

@@woodworkcrafts if it's not functional, then it's a waste of time

@behar 5 ай бұрын

@@dereksteele2284I don’t think you get to dictate what is and isn’t a waste of time for him. If he’s happy with it, it’s not a waste of time.

@dereksteele2284 5 ай бұрын

@behar its a waste of time, if it's not usable

@behar 5 ай бұрын

@@dereksteele2284 Did you read my comment? That’s not for you to determine.

@ronaldpatton5668 Жыл бұрын

You burnt the steel.🤦‍♂️

@woodworkcrafts Жыл бұрын

This is the result of friction because it is solid.

@pioneiroselvagem Жыл бұрын

Tempera

@woodworkcrafts Жыл бұрын

@user-ot5bw4xn3s Жыл бұрын

Класс !!!

@surekaedirishinha2206 11 ай бұрын

👍👍👍