While the description says "tool only" it does come with one each of a bi-metal kzfaq.infoUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI and HCS blade plus an adaptor plate for non-DeWalt blades. Wish I had known that before I bought the blade kit, but oh well. Since I already have a DeWalt drill, charger and batteries there was no need to buy more of those so this was a great deal.There is one other consideration. DeWalt does't sell the depth guide separately so you need to buy the three parts which make it up -- the N275350 block assy, the N275341 metal rod and the N278801 knob. Amazon does sell all three.

Good kit, based on experience the elastic on the sides will stretch and the bit extender will drop out. So my solution was to use an old pen clip on mine.

Glad your light works. Mine just stopped one day. Good kit. Thanks

Love this sheath I have the wave plus with bit kit a bit extender and a streamlight microstream that's my set up and I love it I carry it in my edc bag (maxpedition malaga)

I have a Charge orange G10 in this case, with the extension and a Open mini. I only have 1 set of flat bits, but I mixed up some of the bits, so I have my most used bits. It's a clean lite use, casual carry. I then EDC the same Leatherman sheath, but with a Ozark Trail Multiforce, with the extension it comes with, and another extension, and a set of Wiha bits. I am always tightening doorknobs and other things that I sometimes need the extra extension. The extra extension fits next to the bits and I have a Open mini, on the other lupe, where you have your light. I have a Olight IR2 Pro that I carry all the time with a Victorinox Rambler, on a locking carabiner that I connect on a belt lupe. I sometimes forget it's on my belt lupe

Good build,I have a leatherman wave and I put a flat whistle in place of the bits and a small fire steel on one side and a small flashlight on the other side,👍👍

Don’t stop KZfaq you make it to the top

Just to let you know the bit extenders will only handle about 25 ft/lbs before they break. The Charge slot where the bit extender goes into will handle less than that. From videos I've seen that have tested that. Other than that, I have a Surge with the bit kit and extender, with the same pouch as you and I absolutely love it!! It's my main EDC. You're Charge kit looks like a great kit too!!

My go to is the Leatherman Crunch. Works where others can’t and it takes standard 1/4” bits.

That's a great set up especially with the 154cm blade on the Leatherman charge Plus can't forget the replaceable wire cutters very nice God bless

Great kit. I will be building two similar kits. One with the same Leatherman but with the new ratchet and a ferro rod. The other a Coyote-colored Signal and the Sight Adjuster Bit Driver Extender and a ferro rod to be kept with our hiking gear. I will keep the smaller bit kit set with the Signal and the larger bit kit with the Charge Plus. Note: the Sight Adjuster Bit Driver Extender can accept other bits that are not Leatherman. I also added the two bit holder mods to replace the whistle and sharpener,

I really enjoyed this. I've just got my bit kit and this has given me a few ideas. Love your channel. Thanks!

Thanks for the video! I didn't think I would be able to squeeze both bit kits in the case for my Surge. With a little persuasion I was able to cram both bit kits, the extender, and a small Ti flashlight!

I've picked a charge tti plus with a small watch battery twist olight flashlight on the pouch , bit set and exstender. Also bought a surge and a squirt for small jobs

I have many leatherman and I can’t put down my original pst 11 no locks but I’m used to it and it’s one handed now love it

"I also have the bit extender on the other side of this little pouch, fits like a glove, fits like it was made for it" - Gear Nut It is made for it.....

That's really cool, that would great for a service technician on the road

Just a little tip you might want to try. If you carry it on your belt with something of similar weight on the other side ( Such as your phone with an external battery charger )you'll barely notice you're wearing it. I use the Dewalt Smartphone case on the other side and carry them all the time.

“I do every day carry it, sometimes.” They say that if you every day carry a leatherman wave sometimes, that 60% of the time it works every time.

I have the same kit built but around the surge and I do edc it and the stuff I can do with it is incredibly

3:39 In the bit extension you can already have a normal phillips tip installed, of the most used type.

I have a similar loadout, but with the Leatherman Wave, bit kit, an Exotac Nanostriker XL (orange) in one of the side loops, the Streamlight Microstream USB on the other loop and a firecord lanyard hanging from the Nanostriker. I'm currently using the default kit that came with my Wave, but looking to update to the newer Leather Nylon Sheath (I like the snap better than velcro) but the kit gives me a great multi-tool (w/ bit kit), a light source (which can be recharged easily) and a source of fire.

I carry a Wave series 2, full bit kit, bit extender, leatherman Crunch, MagLite Mini and fisher space pen, all in a Gerber QuadSheath, generally the weight isn't an issue but sometimes it gets caught when getting into the car.

Good video, thanks!

I carry a Charge TTi Plus, Fisher space pen, ThruNite Ti3 on my belt in this Leatherman pouch. I find if you carry one set of bits instead of two it fits better and is easier to carry.

You can get the 4.5 inch case too.

Very nice! I have a similar kit setup, but with the Wave, compared to the Charge.

Nice kit brother.

Good kit and Video , doEDC a Wave on a Belt Carry in a Boat Owner / Fisherman,retired Professional Woodworker and i actually love and use the Spring Loaded Scissors a lot for Tackle Paper Templates and some other Chores i carry a tiny LE D fllaslight that is a button Battery and has a switch to lock it on that’s on my Keychain with a quick disconnect that allows me to put it in my mouth to have it shine where i want i actually use it in my hundred thousand square foot shop at night in pitch dark after the lights on a timer shut off and one time i got locked in a CommercialBuilding Fire stairwell after hours with no Celluar Service that flashlight and my Wave allowed me to eventually Jimmy a lock to get out of there the Wave also has a good Blade i can access one handed and fast that’s Crucial for Safetey on any Vessel and having many lines i actually don’t like the NylonSheaths Leatherman includes with some of their tools so i keep using a Leather one that’s over 25 years old i have a Nylon Belt case for my CellPhone i Jam extras in like you do i buy Bucket Boss Cases at Home Depot and other Hardware stores as i wear a Bucket Boss ShopApron and i’ve had excellent luck with the Longevity of that material nd Fabrication a few times i’ve thought about Sewing my own Apeons because i do Auto and Marine Upohlstery on a Walking Foot Sewing Machine i bought years ago to repair and Fabricate Marine Canas and Vinyl Items the Vintage Automobile Interiors is just one of my Hobbies and i enjoy having the Control over my own deadlines and Quality ImSelf taught on Sewing

Awesome kit. I carry something very similar (I have the Wave from a long time ago, haven't upgraded to the Charge Plus yet). I do EDC it and my one complaint is that I can't attach that case to my belt horizontally. The older case, that has the Velcro, attached horizontally, and I liked it better, but the side pockets are not the right size to carry the torch and the bit extender (they are both the same size - to tight for the torch, to loose for the bit extender). The Charge + is a great tool. I also like the Signal paired with a Squirt PS4.

I aways have my leatherman charge tti plus with the bit set bit extender only I carry a fine tip Milwaukee marker instead of a flash light. Then I have a leathrman skeltool. They both live on my hip. I would not go anywhere without them.

I just can't have a bit driver on my leatherman. I have to have a seperate mini bit ratchet, because I sometimes need a driver on both sides of something.

Awsome. love it.. I use a charge plus with maglite solitare and the bit holders.

I have the camo charge+ really perfect for EDC with the pocket clip

Great video, thank you for sharing.

I carry a leatherman charge tti plus with the s30v steel blade have a bit kit in my pouch also but have the slots to the outside or opposite of the way y ok u carry yours have my bit extender also with the thick side down and thin side up otherwise it seems to work up and fall out also carry a maglite solitaire flashlight that has 47 lumens if I remember right with electric tape around the butt end to bite on and if the tape is thick enough the light does not slip out either fyi thanks for the video cheers

Why not use a surge? I think it's best overall tool kit

Thank you.

Flip the bits back to back it won't be as tight

@3:30 "are they as strong as regular hex bits? I don't think so" Technically you are right, but using it with a Leatherman multitool, they will do more than alright - your Leatherman will rather desintegrate before you break the bottom of a bit, it's tough tool steel!

You think a Acebeam pokelit AA would fit okay in that side slot where you have your flashlight? I’m looking to buy this pouch

I have same Lumitop 3A for 3 ares black battery is a beast 3 mods and I use it with key chain and its not all black no more and its fall 100 times its like the brick and I low that flash light. Please can you tell me I have Skeletool CX and I will buy bits also flesh light will bee on pauch but I don't now what size to buy M with extra packet or L. So help please. Best regards from Croatia 🇭🇷.

Awesome kit. I just got that new-style sheath for my old-style Wave (circa 2004). I love it!

Is that the M or L size of the sheath please ? Nice video !

New category...edcs everyday carry sometimes..n

Cheers Mate!

Mine didn't hold up 😐

Cool kit! That flashlight looks really close to the Lumintop Tool AAA. Do you think that sheath could hold a slightly larger flashlight such as the Lumintop Tool AA 2.0 that recently came out? I think it measures about 3.5” x 0.73”. Would really prefer a AA light for longer lasting capabilities.

Does it work with the Leatherman Wave Plus?

Is that the medium or large sheath

I put 2 bit kits behind my Wave. They fit. But now the snap is a bit loose and won't hold well. I checked with Leatherman support. They said the sheath is only designed to hold 1 bit kit. So having 2 bit kits will stretch the sheath. That's why the snap won't hold well. Anyone has similar problem? Any suggestion for solution other than just carrying 1 bit kit?

it's very very nice and very strong plier l hope to get it but how?

Where can I can this flashlight? I clicked on the link, but goes through many windows...

heavy? I edc 6 days a week a leathernman surge with a brass spacepen and the same massdrop flashlight, but with one bit holder with select bits and in a leather holster. once you get used to it the weight becomes a non issue.

Toon heavy I barely feel mine with the drive, and a light. Just need a good stiff belt

PLS can you post the link for the leatherman bag? I don't find a single one how fit the leatherman + bit kit set + bit extender. Would be rly nice of you. 🙂

What size is the nylon holster?I have a leatherman charge tti and want to get a nylon holster that fits the 42 bit kit and extender

would this work with the large sheath and the leatherman surge?

This isn't 4.5 size is it?

I don’t get why no one uses the pouch that’s made for the bit extender... that’s for a pen.

Greate video! But, there’s something missing.. the sheath comes with 2 sizes M / L . Which one do you have? I have the Wave Plus and I’m thinking to buy this sheath but don’t know which sizes to choose.

If you want to avoid the problem of the stretching nylon external pocket, put all the contents into the maxpedition edc pocket organizer for around $22. Nothing will ever fall out.

Wait, this charge has a 154CM blade? Didn’t the charge used to use s30v?

Leatherman hex bits are not the greatest. They either need to do them better or they need to just make them torx bit. I have better hex bit with both my Victorinox and SOG multi-tools. They are better made and will do the job better. And I plan on getting the Gerber Center Drive because of the feature of being able to use regular hex bits and not have to buy proprietary bits for my multi-tool.

If you read the comments why not try to answer some seems like you don't answer none of your comments makes me want to unsubscribe to your Channel

Heavy? Really are you some kind of girl or something. Lol

Bit kit is useless.

In my opinion to much bulk as edc I edc mine with just 1 of the bit kits and without a torch