Simple Winch Bumper, Ultimate chevy S10 Rock Lander DIY tube bumper

Рет қаралды 20,718

Жыл бұрын

Lets build a bumper!!
If you want a custom, more aggressive look for your rig you need to build yourself a custom tube bumper. We take a Warn universal winch plate some scrap steel and DOM tube to create a custom one of a kind bumper from scratch. Was it difficult.. Yes, was it time consuming.. yes... but totally worth it. This will go nicely with my freshly built tube rock sliders. It doesn't matter what kind of vehicle you have, the concept is the same. I had a blast building this, so get out there an fab! Of course i am using the harbor freight Badland apex 12k winch, I had great luck with it on the Jeep so i will continue to use it on all my rigs.
Check out our website: muddybeards4x4.wixsite.com/my...
Amazon Store: www.amazon.com/shop/muddybear...
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo...
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/?ref=dVU5yUQ6
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards4x4” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/...
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Пікірлер: 61

@bigzoffroad Жыл бұрын

I love when “mistakes” become a meaningful part of the design! Also, i think it looks a lot cooler sticking out in the middle. It’s like an accenting break in symmetry

@MuddyBeards4X4 Жыл бұрын

Haha, thanks 🤟🏻

@freeidaho-videos 3 ай бұрын

I'm not into the whole beard hype that permeates the internet, but I liked this video. I love hidden or partially tucked winches. I like the choice of S10 as an offroad platform. I loved Colt's ONYX challenge S10. Enjoyable watching but I did have to turn down the audio every time you play music. Music should be no louder than talking. I can relate to the "no space" issue, my garage is full of machinist machines and fabrication tools, so I work on the driveway. Pre-bent examples are invaluable, but so few fabricators make them. Nate's Samari is the best build on the internet. It turns out killer BTW. Good catch on the removable section. My lifelong motto is "Think thrice, measure twice and build once." The end result contains my two favorite attributes, it is simple, and it is strong.

@kellyessenwanger9800 Жыл бұрын

This is the most exciting build on KZfaq for me, not only have I just purchased a 2003 ZR5 crew cab Sonoma but my name is Kelly and im also a dude! these S10/Sonoma crew cabs are the best kept secret right now, they can be obtained for such a low price and the drive-train is super solid minus the suspension and axles which anyone wheeling would swap out anyways. keep up the good work!

@MuddyBeards4X4 Жыл бұрын

Haha, awesome. I feel like these are getting more popular as I build it. I paid a little more for mine but it was the cleanest one in the northwest. Had to drive quite a ways to go get it.

@sundancewatts9373 Жыл бұрын

He’s tickling the Chevy guys itch!

@MuddyBeards4X4 Жыл бұрын

🤣

@212caboose Жыл бұрын

I've been wanting to do something VERY similar to this build for a while! I love this build!!

@MuddyBeards4X4 Жыл бұрын

Thanks 👊🏻

@derekmoore1612 4 ай бұрын

14:46 Hope that this inspires you to fabricate too..... Love this. I try to convey this to people around me.

@XECUTA2 6 ай бұрын

Thank you I am inspired from this

@MuddyBeards4X4 6 ай бұрын

👊🏻

@MacsSpecialitiesMotorsports Жыл бұрын

12:25 Nice grab handle build-in! I love when a mistake becomes practical overlooked mod. BTW the bumper looks great!

@MuddyBeards4X4 Жыл бұрын

Thanks 👊🏻, it worked out this time, lol.

@jessemeanlt1 Жыл бұрын

Looks great.

@MuddyBeards4X4 Жыл бұрын

Thanks

@Lifesmasher Жыл бұрын

This bumper looks better then all of the “Offroad bumpers” on the market and they all make your rig look like it has a fat lip nice work man

@MuddyBeards4X4 Жыл бұрын

Thanks 🤟🏻

@kodymcgavran6073 Жыл бұрын

Killer, I’m from your area too and started building an s10 blazer for about the same purpose right around the same time, like watching what you got going on here, hell I may see you on the trails sometime

@MuddyBeards4X4 Жыл бұрын

Nice, we might have to start a PNW S10 gang🤣

@talon0863 9 ай бұрын

Thanks nice work

@MuddyBeards4X4 9 ай бұрын

Thanks👊🏻

@thousandoaksauto1696 Жыл бұрын

cool!!! I learned something, thanks!

@MuddyBeards4X4 Жыл бұрын

Awesome 🤟🏻

@DirtLifestyle Жыл бұрын

Looking good, bro 👊

@MuddyBeards4X4 Жыл бұрын

Thanks man🤟🏻 thanks for the help bending the tube.

@nwbronco1972 Жыл бұрын

Love watching this build

@MuddyBeards4X4 Жыл бұрын

Thanks

@michaelharris1455 Жыл бұрын

Definitely gave me a couple ideas for the bumper I want to build, thanks!

@MuddyBeards4X4 Жыл бұрын

Nice, Good luck 👊🏻

@joshslackslack8115 Жыл бұрын

Awesome rig I'm building a 91 S10 regular cad long bed 4x4 truck nothing as crazy as your rig mostly a weekend toy I'm going to be building a front bumper something like you have

@MuddyBeards4X4 Жыл бұрын

Awesome, thanks 👊🏻

@bonespur2728 Жыл бұрын

So clean.

@MuddyBeards4X4 Жыл бұрын

Thanks 👍🏻

@zerobucks9 Жыл бұрын

if you got any magnetic welding square you can set some angle iron behind the band saw keep it from walking on you.

@dandahermitseals5582 Жыл бұрын

Wow!! A quarter inch base plate. They should all be that minimum dimension. I have that winch ( badged as a Zeak) Some of it's parts still say Badlands on them. Haha Dandahermit

@raystevens687 Жыл бұрын

I think you did a great job keep up the good work.

@MuddyBeards4X4 Жыл бұрын

Thanks 👊🏻

@jackiejoe8930 Жыл бұрын

Heck ya with the inspiration! If you can build a 4 door sas S10 in that tiny shop anybody can

@MuddyBeards4X4 Жыл бұрын

Thanks 👊🏻

@Austinandjules Жыл бұрын

If you ever come to NY we are gonna have to wheel. I have a s10 sitting on leaves with a 44/60 combo. It has 14” of travel in the front and a touch more in the rear. I have a very similar bumper and slider set up. That I built over a year ago. 😂😂

@MuddyBeards4X4 Жыл бұрын

Nice👊🏻

@IronDragonSC 2 ай бұрын

😂 yeah those bumper mounts are a real bear to remove.

@jasonborne2874 Жыл бұрын

In the middle of extended cab build myself tons and 37s for now. Mine will be a rocklander as well will send pics when done......would love to drive out for a trip....

@MuddyBeards4X4 Жыл бұрын

Nice man, for sure

@jasonborne2874 Жыл бұрын

I've only been around Southern Missouri and Arkansas ..... lots of good stuff around here but wanting to experience the country....

@tedz74 Жыл бұрын

One drawback of the apex winch is you cannot clock the gearbox to make the clutch handle more accessible. At least you relocated the solenoid pack. Most forget you can do that.

@Tanhands36 Жыл бұрын

Nice bumper. I need to make one for my K5 and my OBS and this looks good. What size tube did you use? Thanks for the videos.

@MuddyBeards4X4 Жыл бұрын

Thanks, 1 3/4” .120 dom.

@Mallrunner Жыл бұрын

Was the portable bandsaw table built or purchased? Can't seem to find info about it and I want to make my milwaukee band saw like that

@MuddyBeards4X4 Жыл бұрын

Bought from Swag offroad www.swagoffroad.com/products/swag-portaband-pro-table?variant=41909247180985&currency=USD&gclid=EAIaIQobChMI4Z2Vjq7i_QIVpAZ9Ch0OeQBBEAQYASABEgJZCPD_BwE

@BLAZ801 6 ай бұрын

Kelly where did you mount the winch control box?

@MuddyBeards4X4 6 ай бұрын

It is behind the grill mounted on the core support. I had to remove everything from the control box to make it fit. 9 months and many uses and I have not had any issues yet.