Singer 14CG754 ProFinish Serger Overlock 6 Threading

Рет қаралды 54,756

3 жыл бұрын

Learn how to correctly thread the Singer 14CG754 ProFinish Serger Overlock.
Watch all video tutorials on the Singer 14CG754 ProFinish Serger Overlock here:
sewingmastery.com/singer-14cg...
Buy This Machine TODAY:
amzn.to/2PRE0YG
Buy Quality Serger Thread here:
amzn.to/33Vlw1B
Buy SINGER Serger Needles:
amzn.to/3gXBcF3
Buy a SINGER Needle Threader:
amzn.to/30YBlmd
Singer 14CG754 ProFinish Serger Overlock Manual:
bit.ly/3fQPLcp
Learn more about the Stitching Cosmos online course:
sewing-mastery.teachable.com/...
Watch 10 free Stitching Cosmos videos:
sewing-mastery.teachable.com/...
Learn how to make the Ultimate Stitch Book:
• How to Create the Ulti...
SewingMastery.com - Sign up to be notified via e-mail of Sara’s future online courses!
www.sewingmastery.com
Facebook - / sewingmastery

Пікірлер: 41

@taomenshuifilmstudio34 3 жыл бұрын

Very well done, !!!!, Your Videos have sold me on the Machine, it's so important for future customers to have all the information surrounding the operation of these Serger's......

@laplibrarian6094 4 ай бұрын

THANK YOU!!!! I've been sitting on my serger for a few years and have FINALLY figured out how to use it properly thanks to your tutorial!!!

@rachellmoultrie4883 18 күн бұрын

Thank you🙏 your tutorial is the best!

@abbiepaschal7583 9 ай бұрын

This tutorial is absolutely the best. I was able to re-thread my machine straight away. Your camera angles made sure to show everything I needed to know. Thank you so much!

@seemajairam6472 2 жыл бұрын

thank you very much madam this tutorial helps me a lot to start back up from scratch. thank you again...

@fouroakswisconsin Ай бұрын

Maxilock all purpose polyester thread works well. Spoolnets over the thread cones help also. Once my serger was out of warranty, my trusted machine repair shop, rewired the light for a LED bulb which was great.

@jameshuxley5531 3 жыл бұрын

This video, which is specific to my serger, plus your Craftsy class "Serger Solutions: Troubleshooting Techniques" has turned me into a serger fan! The serger into one of my favorite pieces of creative equipment. Thank you for your clear instructions!

@kharyzma4u 3 жыл бұрын

Thank you for this tutorial. I have had this server since 2015 and tried to use it just one time. I kept it in the original box and haven't used it since 2015 because I was always intimidated by it. I thought it was too difficult to thread. Thank you for this tutorial because it will help me to put my server to use. I've had it long enough and it's about time for me to get busy 😉💗💗💗

@reginaldroseable Жыл бұрын

Ma'am, I have been trying to thread my surger for 2 years. 2 years... I have finally done it 🙌🏽 Many thanks

@kimberlykaufman2407 2 жыл бұрын

I was frustrated with my machine and found this very helpful video by searching … imagine that. Wow! You walked me through step by step and the machine is performing much better now! I’m a happy sew’r at this moment!

@philippadaigle5680 3 жыл бұрын

On a whim I bought this Singer serger yesterday and I was feeling a bit intimated until I found your videos. Thank you so much for being so clear. Looking forward to watching all of them.

@angelinacanez6788 2 жыл бұрын

Thank you, this was very helpful. At last I can thread my Serger correctly

@04658IFH 2 жыл бұрын

Thank you! You saved my serger from being thrown out in a snowbank! I was having no trouble threading the machine correctly, but I could not get a chain started. Running the threads over the foot, starting the needles in cloth, and then sewing made all the difference. Other videos and even the manual that came with the machine do not show to do it that way.

@robrenee 2 жыл бұрын

Easiest video to follow. I have the same machine and this was so easy, thank you!

@rosiedelgado93 2 жыл бұрын

I'm left handed and threading was a major issue! Thanks for your tip on tweezers cause using my cricut angled tweezer I already had helped me get the job done! Very informative and easy to understand your videos!

@Susan-mp7nk 3 жыл бұрын

A tried watching the DVD that came with the machine and it wouldn't work on my computer. Thank you KZfaq for this great beginning video! Now I can't wait to start using my machine.

@KnittingsAndSewings 3 жыл бұрын

Your video is extremely helpful. I have an old Singer Easy Lock 432 and your youtube really helped me figure it out. I love your tips about using the tweezers at the end of the thread and your links, above, to good serging thread etc. You are an excellent teacher.

@RMurrell31 Жыл бұрын

This is absolutely the best tutorial, hands down. Your tutorial was easily understood. Thank you.

@alyxke3831 3 жыл бұрын

Thank you for these videos on Singer ProFinish!! This were super helpful, short and to the point!!!

@colorblue40 Жыл бұрын

Thank you so much for this video

@brynabryna 8 ай бұрын

I had it going perfectly thanks to your videos and I broke a needle and replaced it, thanks to your videos but now my lower looper tension is all messed up! Any tips would be greatly appreciated!!

@elise9819 3 жыл бұрын

Thank you so much for making videos for this serger model! You helped me get started new subbie here :)

@kharyzma4u 3 жыл бұрын

Same here 🙌🏾

@keepingourhome7271 Жыл бұрын

Thank you thank you thank you. This will be my go-to, thank you. ☺️☺️☺️

@808carmen 3 жыл бұрын

Thank you for this video! I'm learning to use my serger, and the yellow and red thread had come undone from the last few steps. This is just what I needed to figure it out.

@fionafionovna1957 Жыл бұрын

Thank you very much!

@tbehar2932 Жыл бұрын

Time to undust my machine 😊 THANK YOU!!!

@Gabiimade 2 жыл бұрын

Thank you I have one for so long and was having such a hard time with my threads not it’s ready for my projects thanks again

@misstaja1976 Жыл бұрын

Thank you very much

@riallekeo5915 2 жыл бұрын

I got mine second hand and I followed your tutorial. Thank you. The thread seems to keep coming out of the 4th step of the second thread part whenever I need to serge so it's not serging anything at all because of it. what could be the issue?

@carmenlopes3737 2 жыл бұрын

Thank you so much !!!! 👌❤

@n2msb 2 ай бұрын

Hello there I appreciate your tutorial on threading my surger. I’m new to using the surgery, I was able to thread the machine however when I try to sew on it, the threads are loose, any suggestions?

@sbaumgartner9848 3 жыл бұрын

Excellent!

@mohammedali808 2 жыл бұрын

You just wonderful.

@fabcraftsandmore Жыл бұрын

Fantastic! I just bought one of these for $64 at a thrift store. It seems to be new and never used. It came with everything but the box and was still threaded as you show in your videos. I wanted to use black thread to mend a garment I have and your instructions were so easy to follow and I got it all done right the first go and was able to mend my shirt!!! I do have a question though, the only trouble I had was lining up my fabric with the needles to get it to start and stitch in the correct place. I also swung the cutter up because I didn't need any of the fabric cut off. What's the best way to line up something that has already been sewn to get the seam line in the same place. Thanks!!

@washinis3937 2 жыл бұрын

Hi! I was following perfect until you lost the green and blue! Where is this going at last? Inside the needle or just through?

@cathyjohnson617 2 жыл бұрын

So its threaded in order 1 through 4.

@DavidCassidyFan2 Жыл бұрын

Notes to self: Red starts about 2:30; Yellow starts at about 5:25

@ciaragee5484 2 жыл бұрын

Ok I’m having a first time issue with this machine and I’m unsure what’s going on! It’s been sewing well the last 2 years I’ve thread it properly and it hasn’t given me any issues! The last two times I’ve tried to use it it hasn’t been sewing correctly I’ve re threaded it so many times and still the same results! I’m not sure what’s wrong! HELP! 😂

@mohammedali808 2 жыл бұрын

I just bought one of these machines and am very grateful for your videos. Sad to say , very respectfully, but the BLACK AND WHITE PHOTOS ARE VERY BLURRED IN THE MANUAL. Hope that Singer can change it. If it were not for your videos I would have had to return the machine.

@annesummers09 3 жыл бұрын

I have this machine (2 years) and I have had nothing but trouble with it. The straight needles simply will not stay threaded. I have changed the needles, threaded and re-threaded it again and again and it simply will not stay threaded. I have watched video after video and played the demo disc time and time again. No help. I am NOT a beginner sewer. I have been sewing since I was 14 and I am now 68. Maybe the timing is off or I just got a lemon but I have had trouble since day one. No more. I'm selling it and getting a Brother. And good riddance.