Singer Heavy Duty - Adjusting Bobbin Tension, Please read the Description before posting questions.

Рет қаралды 387,549

9 жыл бұрын

Click "Show More" before commenting. Also, please forgive my dirty hands.... I had been working on machines all day when I recorded this video.
I've had a few reports of people receiving new machines with the bobbin tension being too loose. Be aware that doing this may void your warranty. However, it is an easy fix to do yourself it you wish.,
In this video I'll demonstrate how remove and tighten the bobbin tension. Hopefully, it will eliminate the need for you to return your new machine.
Here is a link to download the service manual: www.kevinsews.com/download/Sin...
NOTE! Yes I know the thread was wrapped around the needle when I threaded the machine at the end. Working around a close-up camera shot limits my hand position and viewing angles. In the end I had to tighten the case about 1/8th of a turn in order to get the proper bobbin tension.

Пікірлер: 988

@mountain-view310 4 жыл бұрын

Last night I opened up my machine I did see that yellow dot but for a million years I would have never thought a screw would be there to tighten. My machine is driving me bananas. I’m trying everything to fix the thread from wrapping around the bobbin area and from pulling in the fabric. Hope this will work. Thanks a million.

@kevinsews 4 жыл бұрын

Stardust You’re welcome!

@ianwilliams1448 2 жыл бұрын

Yes. Mine was a used machine. It would always sew about 6-12" before the lower thread knotted up beneath the needle. Sold it in the end..

@jenniferciari204 Жыл бұрын

Thank you kind Sir! I just got a Singer 6800C and I’ve been trying for 2 hours to get the tension right before I pick up an old project on a new machine. The manual only discusses top tension thread and I just couldn’t get it right. Watched this video and viola! In 15 min I was up and running! Thank you kindly.

@kevinsews Жыл бұрын

You’re welcome!

@jesusfirstto-the-pointendt4552 5 жыл бұрын

Glory and Praise be to God! I've been trying for a while now to get this bobbin case back into the machine. Finally, I prayed to God and He sent me to this video! Thank you so much! Every other video I've come across did not mention that I might need to unscrew that bar to get the bobbin case out or back in for that matter. Thank you!

@kevinsews 5 жыл бұрын

You are very welcome!

@Barbie.Boo1961 4 ай бұрын

Me as well, just bought my machine and it keeps bird nesting. Glory to Jesus for answered prayers, no matter how simple the request is. God never fails

@galenarayven6720 2 жыл бұрын

I bought my first sewing machine (Janome) twenty years ago and it finally gave out. The bobbin tension was easy-peasy to adjust. I can't believe the ridiculous amount of work it takes with this new Singer machine just to adjust the bobbin tension!! So disappointing. But I thank you for your very helpful tutorial, it saved the day! You rock. ✌️😁

@kevinsews 2 жыл бұрын

You're welcome!

@tammyjones105 Жыл бұрын

Thank you for posting this. My machine is 2wks old and I was ready to throw it out the door, but your video helped to fix it and now it's working perfect....

@kevinsews Жыл бұрын

You’re welcome!

@nancyphiv9142 2 жыл бұрын

Omgeee, I was putting off fixing my sewing machine for 2 years and THIS WAS ALL I HAD TO DO lol. Thank you for your videos!!!!

@kevinsews 2 жыл бұрын

You’re welcome. I am glad to hear it was helpful.

@sheenaawad8379 4 жыл бұрын

Many troubleshooting videos out there pointing to incorrect top threading but not showing how to adjust the bobbin thread. Thank you for this. It has saved me a lot of aggravation.

@kevinsews 4 жыл бұрын

You're welcome!

@teresagrall 3 жыл бұрын

I didn't need to actually mess with my bobbin tension but this video totally helped me get my bobbin case out! I couldn't find any information anywhere about how to actually get my bobbin case out until I saw this video and saw you unscrewing those two little screws on the side. I'd even written the Singer company and their instructions didn't mention it either. Now that I've seen this video, I can get the bobbin case in and out easily! Thank you so much!!!

@kevinsews 3 жыл бұрын

Teresa Grall You’re welcome!

@elnoralittle 3 жыл бұрын

Omg thank you soooo much- two hours of trying to figure this out then I found YOU!!! Yay for me!!!

@kevinsews 3 жыл бұрын

You’re welcome!

@LDM805 Жыл бұрын

Where have you been all my sewing life?!?!?! Great video.

@kevinsews Жыл бұрын

Thank you! I am glad to hear it was helpful.

@Eosch10 2 жыл бұрын

Just wanted to thank you for doing this video...had no idea what was wrong with my machine and now it works great. The yellow paint got in the way of unscrewing the tiny screw, but after some effort it finally turned. So grateful

@kevinsews 2 жыл бұрын

You're welcome! I am glad to hear it was helpful.

@adamk.5552 8 ай бұрын

This video was published eight years ago but it is still helpful today. I recently purchased a new Singer denim sewing machine and I had to adjust the bobbin tension as it was a bit too tight and the needle thread was still showing up on the bottom side regardless of the needle tension adjustment. I was getting somewhat positive results at the max. needle tension of 9 but you can't always use the max. tension setting for the needle. Now, I am getting great results at default 4 for the needle. Thank you for posting this video.

@kevinsews 8 ай бұрын

My pleasure! I am glad to hear it was helpful.

@lawrencejlittle 2 жыл бұрын

I thank you very much for this video it was exactly what I needed and it helped solve the problem I will refer to you and your videos whenever I have issues with my sewing machines thank you

@kevinsews 2 жыл бұрын

You’re welcome!

@analaga3228 2 жыл бұрын

Thank you so much this just rescued me from much despair.

@kevinsews 2 жыл бұрын

You're welcome.

@PrairieMom 2 жыл бұрын

I was reluctant to do these steps at first but then I took it apart and found a broken needle inside the casing along with a bunch of dust/fabric fuzz. Now seems to be working perfectly. I feel pretty badass that I fixed my own machine! Great video.

@kevinsews 2 жыл бұрын

That is great to hear!

@bobsmith3605 6 жыл бұрын

Worked perfectly!! Thanks so much. My whole 4452 machine was jammed and would not move in any direction by hand or peddle, so my problem was much more than bobbin tension. At less than six months old and already looking at a service repair, I thought things were really messed up inside somewhere and was really disappointed in the 4452. I followed your excellent instructions, and yes, those inside screws are really tight! That was a great tip, I would have given up trying to move them if you had not mentioned how from the factory they are in there. I finally had to use a screw bit with a small 1/4 inch flat wrench to get them loose. I didn't follow your instructions to leave them in there but took one out to get at the other. It was another good tip because they are tricky to get started back in so much better not to take them out. My bobbin holder was jammed in there and would not slide out as easy as in your video. This convinced me to try and get it loose and out, hoping it would free the machine. Once I gently pried it loose and took it out, the machine moved freely again. More than I every wanted to know about a sewing machine, but thanks again, your video saved me big time.

@kevinsews 6 жыл бұрын

Thanks for the update! I am glad you worked it all out.

@mrscatsmrscats62 Жыл бұрын

WHY are the newer models make it so complicated?????

@kevinsews Жыл бұрын

Convivence is why. People want it. At least they offer these simple mechanical machines still.

@paov1407 2 жыл бұрын

Thank you so much, finally I can use my machine again!

@kevinsews 2 жыл бұрын

You're welcome!

@naubaucat 9 ай бұрын

I found this video a couple of years ago, and without this I could not have fixed the problem with my machine. In fact I had to find it again , because I forgot about the tension on the bobbin case. Thanks again excellent directions.

@kevinsews 9 ай бұрын

You're welcome!

@regallineage6091 3 жыл бұрын

I am a beginner with sewing machine and it jammed on the first day I began using it! I followed your tutorial and one other that helped me solve a jamming issue. God bless you!

@kevinsews 3 жыл бұрын

You're welcome! I am glad to hear it corrected the problem.

@grimesjon1 4 жыл бұрын

Thank you! Wish I would have found this first!

@kevinsews 4 жыл бұрын

You're welcome!

@graceoluwajuyigbe2403 4 жыл бұрын

Thank you for your video. My problem: I have singer 4432, it has been working fine since I got it but since yesterday I couldn't sew anything the thread bunches up at the bottom. Please how do I fix it? Thank you

@crissidoll 4 жыл бұрын

Check that your top thread is set up properly, make sure your tension is good (around 5 is usually good) and pull both threads back as you begin to sew.

@kevinsews 4 жыл бұрын

grace oluwajuyigbe youtu.be/

@jentlejd 3 жыл бұрын

THANK YOU!!! I'm new to sewing and I just got this machine (first bottom load bobbin too.) I was getting so frustrated with the birds nests and jams. I just found your video and I adjusted the bobbin...it worked! Thank you so much for this video.

@kevinsews 3 жыл бұрын

You’re welcome!

@stitchwishes499 9 жыл бұрын

I so appreciate your technical videos for this machine. I was gifted this when I couldn't afford one, and it's turned out to be such a workhorse. It's also fantastic way to learn how to fix and maintain a machine. The manual says not to touch the bobbin tension. I just used a small screwdriver to peel away the sticky yellow gunk over the screw. The screw never shakes out of place after I adjust it, so I don't know why they glued it. I loosen both and remove one of the forward screws, it's easier than the back ones for me. I've oiled the wick under the bobbin once or twice, it makes a big difference.

@kevinsews 9 жыл бұрын

Stitch Wishes I am glad to help. I am so use to adjusting bobbin tension in my industrial machines that it makes sense to me you should know how to do it in any machine. It is like the sewing machine mfgs. think you only sew with one type of thread, which is the same they test with, so you never need to adjust your bobbin tension. Good for you for oiling the bobbin area. You are correct in that it makes a big difference.

@InAHandBasket Жыл бұрын

My problem seems to be with the top tension. I have to have the tension on 9 to get a decent stitch. The top looks fine but when you turn it over the loops from the top haven't pulled the bottom thread tight. You can pull the bottom thread right out of the fabric. Does this mean the bottom tension is too tight? I don't see a way to fix the top tension. It is a brand new machine and came with this issue!

@kevinsews Жыл бұрын

Take a look at this video as a starting point. kzfaq.info/get/bejne/brqAdZWq392RYY0.html If that doesn't help I have another video showing how to tighten the thread tension here: kzfaq.info/get/bejne/msp2lqtm0dTSmo0.html

@InAHandBasket Жыл бұрын

@@kevinsews Thanks for your reply. I think part of my problem was that I was doing upholstery and did have a fine upholstery thread. When I finished with my couch I put the machine away because we would be travelling over the winter months. I ordered a new bobbin case, put in a 14 needle and used different color top and bottom threads, cotton wrapped polyester on the bottom and the top seems cotton but the label is off. I got a decent stitch at 7 top tension. Anything below that and I could still pull the bottom thread out. I watched both above videos and of course the original video. I don't see on the second video here where you take the whole machine apart to clean, where you show how to tighten the thread tension. I looked on your actual page and didn't see the follow up videos (cleaning and tention adjust) but I think they are probably there and I'm just not finding them. Anyway, not comfortable taking a machine apart like that yet. I can work with a 7 tension if I have to but I may try to loosen the original bobbin case tension and see what happens. The new bobbin case seems to work fine, although not sure why I need a seven and not a 5ish for top tension. Was hoping a new machine would work right out of the gate. Don't want to spend more money bringing it for maintenance and also living on an island with only ferry transit makes it a pain.

@kevinsews Жыл бұрын

@@InAHandBasket Okay, thanks for the update!

@BekaLovesDaniel 3 жыл бұрын

Okay. I guess my bobbin tension is fine as my top always looks perfect but the bottom is loose. Not enough to nest all the time but say for a zig zag ... it's not exactly a zig zag on the bottom. Is it the machine tension or the foot pressure ? I have a singer Heavy Duty 4411 and my kids often play with the foot pressure dial. Please help

@mewporter 3 жыл бұрын

I have the same question! Any thoughts would be helpful.

@kevinsews 3 жыл бұрын

Create a video (cellphone?) showing me what you are experiencing and post it on your channel. Let me know once you post it and I'll take a look and see if I can help you.

@teresamariavasquez 4 жыл бұрын

I was about to give up on this machine, no much experience i was frustrated, now I am so happy to see there's a solution 😀 Thank you 😊 💓

@kevinsews 4 жыл бұрын

Maria Teresa Groetegoed V You’re welcome!

@AnnieWynn 6 ай бұрын

Thank you so much! I just bought a display model C7220 and could tell after a short test that the bobbin tension was way too loose. I found your video and then followed your instructions. My tension is perfect now. Your video is the best!

@kevinsews 6 ай бұрын

You're welcome!

@lindaharris454 Жыл бұрын

Kevin, Could you share for a standard setting what the buttons should be set? Tension = 4 Needle position = Width = Length Thank you greatly!

@kevinsews Жыл бұрын

Buttons or Button Holes?

@MichaelCena08 4 жыл бұрын

My wife made me fix this machine. Appearently the machine was working fine. She just didnt know how to use it -.-

@kevinsews 4 жыл бұрын

That is great to hear! Thank you!

@alakazamalakazoo680 3 жыл бұрын

Thank you!!! I have been having intermittent tension problems for MONTHS and this has finally solved it after trying 5 or 6 different things. I needed to tighten that screw almost an entire turn.

@kevinsews 3 жыл бұрын

My pleasure!

@amesadams47 5 жыл бұрын

Thank you for this video! I’ve been trying to figure out why my thread kept getting stuck and wrapped around the bobbin casing - I didn’t seat the case in right. But your demonstration and explanation of how to reinsert the bobbin case was spot on. Thanks again!! 😅

@kevinsews 5 жыл бұрын

You're welcome! I am glad to hear it was helpful.

@renevanwyk4053 3 жыл бұрын

I'm not very familiar with top loading bobbin systems but this video helped me to understand how it is put together. I bought a machine off marketplace today and the bobbin casing seemed to be popping up after a few stitches. I fixed it thanks to you.

@kevinsews 3 жыл бұрын

You’re welcome!

@natalierix5679 3 жыл бұрын

YOU ARE A GENIUS!! Never called anyone a genius before, but you, you are a GENIUS!!!!!!!!! I think I’ve just fallen in love with you. My thread wouldn’t hold together when I sewed, followed your first video on where the thread should be and it made things better but not fixed, followed onto this video and now my baby is sewing perfectly!!! I am amazed!!!!

@kevinsews 3 жыл бұрын

Ahhh... thank you so much

@thereallisamarchbanks 2 жыл бұрын

JUST bought a 6600C and have been struggling with tension. THIS video corrected the problem. THANK YOU!!

@kevinsews 2 жыл бұрын

My pleasure!

@BuhlouBear 4 жыл бұрын

I am planning on buying a Singer, I was told to seek your channel out and to believe in whatever advice you offer.

@kevinsews 4 жыл бұрын

The current Singer is just a name to put on machines that a Corporation that owns Singer, Pfaff and Husqvarna VIKING. Recently they added Husqvarna VIKING machines to the www.singer.com web site. They have decided to market the Singer machines the lower end and less expensive marketplace. The usually means the quality control is the first thing to go. People go out and buy a Singer Heavy Duty Series at Walmart and something goes wrong and there is no dealer to take it back to for repair. They tell them to ship it to a repair center at their on cost. This is usually close to the machine cost. Then the user trashes the machine online. I am in the process of completely tearing down a machine and showing how to fix timing issues. I am hoping this will help some people going forward that have simply somethow thrown their machine out of timing fix it themselves and get them back to sewing quickly. Unless you pay a lot more for a machine to a Dealer this is what you will have to do. It you want a dealer that will take care of your machine then you will need to generally pay a few thousand dollars for it to get them interested. With all this being said.... how can I help you?

@katet.3543 3 жыл бұрын

Thank you this actually helped me fix a tiny problem with the bobbin going back in. When you said it should rock back and forth and hit the stop - my metal stop was sticking out and catching my top thread and that helped me understand what it was there for and I bent it back. Super thx

@kevinsews 3 жыл бұрын

That is great to hear!

@malkadionisia2351 6 жыл бұрын

I love your videos!!! my machine started acting up, the thread in the top looked awful while the one in the bottom was perfect and this fixed it right up! I did have to try a couple of times before i got the bobbin case in the right position because the small piece (even though i left the screws in) moved a bit and the thread was getting super tangled. But now it is working perfectly, I also learned how to put in the bobbin properly in this video haha :) I bought this machine because of your videos, THANK YOU!!!

@kevinsews 6 жыл бұрын

You're welcome!

@nnjandy 3 жыл бұрын

Thank you! Wish I had seen this great video before purchasing a Janome 5300qdc electronic. The good news is the Singer makes better stitches (and they hold) and because of this video it is back in service. Janome and it’s loose stitches and inability to sew over thin elastic will now be used strictly for piecing.

@kevinsews 3 жыл бұрын

You're welcome!

@clarittag5533 5 жыл бұрын

Thank you so much for the video! Fixed my probelm saving me lots of time and money. Now I know that it was my bobbin tension all along that was giving me so much probelm. Subscribed 👌

@kevinsews 5 жыл бұрын

You're welcome!

@bakersgirl10 3 жыл бұрын

I am so happy I found your video!!! I was getting ready to return machine to store and get a different brand since I have been having lots of issues with singer brand! Your a lifesaver!

@kevinsews 3 жыл бұрын

My pleasure!

@ChloeLewis 4 жыл бұрын

I let some material get sucked through the throat plate and had to take out the bobbin case to unjam it. And then I couldn't figure out how to get the bobbin case back in correctly -- until I found this! Thank you so much!

@kevinsews 4 жыл бұрын

You're welcome!

@Hartsikasvo 9 жыл бұрын

Thank you so much for your videos with this machine! I just got mine and the instructions i got said nothing about bobbing tension or oiling. So i'm so happy to see these videos. Easy and clear instructions. Just like they should be!

@kevinsews 5 жыл бұрын

My pleasure!

@cthomasbydesign 6 жыл бұрын

That is absolutely amazing. Who knew that little yellow thing even existed. Thank you for posting this.

@kevinsews 6 жыл бұрын

You are welcome!

@johnryan296 4 жыл бұрын

5 year old video just helped me out! Thanks, I am having a problem with timing and the bobbin holder. But I see how it works now. Thanks. I think my bobbin holder spins a bit. I am going to check that little hold down bar, it might be bent. I have the same machine without the needle threader. Thanks--Sewing is all new to me...

@kevinsews 4 жыл бұрын

John Ryan Ok let us know what you discover.

@tybit2271 4 жыл бұрын

Saved my sewing too! After a cleaning, tension went bizerk! Thank you, just followed along and it’s working again.

@kevinsews 4 жыл бұрын

My pleasure!

@annelisecollette 8 жыл бұрын

This video saved my life!! I have been trying to the machine for DAYS! Did this and voila, I am sewing again. Thanks!!!!!

@kevinsews 8 жыл бұрын

+Annelise Collette You're welcome! I am glad to hear it was helpful.

@waitforollie 6 жыл бұрын

YAY thank you SOOOOOOOOOOO much I fixed it ... I tried everything. new needle.. tension on top... new bobbins.. cleaned it nothing worked.... UNTIL NOW THANK YOU I had no idea there was a screw on the bobbin ..

@kevinsews 6 жыл бұрын

That is great to hear! You're welcome.

@donna3136 3 жыл бұрын

Thank you Kevin. This help me a lot. I have been having problems with my bobbin thread for two days. I knew the thread was to loose but I didn't know how to fix it. So I became inspired and decided to ask youtube, and there you were. I was wondering what that yellow thing was sticking out of my bobbin case. I FIXED MY BOBBIN THREAD, YEA ME!

@kevinsews 3 жыл бұрын

That is so great to hear!

@cynicismccp5857 3 жыл бұрын

Me too. I have the same problem after I bought this sewing machine, and I didn't know how to fix. I found several videos in KZfaq until I saw this one. This video is very clear and very detail. I found my problem and fixed. Now this machine is perfect! Thank you so much. I am very happy today.

@kevinsews 3 жыл бұрын

@@cynicismccp5857 Great.

@alliehaddon1945 9 жыл бұрын

Thank you so much! Your instructions were easy to follow and to understand. you did not rush and Your video was very clear to hear and understand!!! I haven't used my machine in nearly three years and found a new project and got started and completely forgot how to fix the tension!!!

@kevinsews 9 жыл бұрын

Allie Haddon My pleasure! I am glad it was helpful.

@kathy_12342 4 жыл бұрын

This video was very helpful. Other videos were not really going in depth with this. Thank you for filming this video.

@kevinsews 4 жыл бұрын

You're welcome!

@stitchlip 7 жыл бұрын

Your videos are truly awesome! Between your thorough instructions on how to clean and oil a Singer Heavy Duty and this one, you saved me a trip to the service centre and a bunch of money! Thank you!!

@kevinsews 7 жыл бұрын

Thank you! I'm glad it was helpful.

@stitchlip 7 жыл бұрын

Had a bit of weird tension problems after cleaning and a clunking sound, so I did a bit of trouble shooting based on advice you gave other people: - Took the bobbin case back out - Added a bit more machine oil - Adjusted the bobbin tension a random amount - Put it back in the way you showed here - Added a new needle - Made sure to thread it properly - Tested it with a successful outcome! I noticed that you don't use the little felt liner in the bobbin case. Am I supposed to remove that?

@kevinsews 7 жыл бұрын

No.

@mhsbandvideosbyLP 3 жыл бұрын

Thank you so much Kevin! This video showed exactly what I needed to do to fix my bobbin issue! Next time I have a problem with my sewing machine I will definitely turn to your videos for help!

@kevinsews 3 жыл бұрын

You're very welcome! Thank you!

@vichy766 7 жыл бұрын

Kevin please leave this vid and your others up for the help they assist. I realize success comes not from getting a better machine, but from practice which threads/materials/speeds work together. It is quite an effort to get going. Like if I had top line basketball shoes, only using them playing basketball will make me better, not just the shoes.

@kevinsews 7 жыл бұрын

No worries. I will leave them up.

@rosecruz5926 3 жыл бұрын

Thank you! I have been getting very frustrated, I’m so glad you helped me! Thank you from the bottom of my heart!

@kevinsews 3 жыл бұрын

You're welcome!

@angelagreen5002 4 жыл бұрын

Thank you, thank you! I had an order due that I needed to finish and could not get the tension right - this fixed it right up!

@kevinsews 4 жыл бұрын

Great!

@LovelyTraveler-th9te 6 жыл бұрын

You are a God send!!! I was so mad and about to lose my mind. Thank you for posting this. I truly appreciate your help!

@kevinsews 6 жыл бұрын

My pleasure!

@thithanhuongnguyen 2 жыл бұрын

Thank you so much for your video. I am a beginner with a Singer 4423 given by a friend. Thread keeps being broken itself. I will tend to fix it following your video tonight to see if it works. Wishing you a nice day, sir.

@kevinsews 2 жыл бұрын

You’re welcome!

@coleenh1028 5 ай бұрын

Thank you so much for this! I was dismayed why my new 6700C kept leaving huge loops on the bottom and the upper tension adjustment did nothing. My husband convinced me to go for it and it worked!

@kevinsews 5 ай бұрын

You're welcome! I glad to hear it helped you.

@phyllisjohnson809 3 жыл бұрын

Your videos are so helpful. Thank you for posting these Kevin!

@kevinsews 3 жыл бұрын

Phyllis Johnson You’re welcome!

@Funnygenderman 7 жыл бұрын

You sir, are an everyday hero. I was getting ready to bring my machine in, which was very odd, as it's a very new machine. And came across this video. Problem solved and back in action'

@kevinsews 7 жыл бұрын

Great!

@vidyapatel5901 6 жыл бұрын

Me too

@lisaschrader6292 Жыл бұрын

I was literally loosing my mind with my machine until I found this video!! Thank you so much! I had my tension set at zero! I didn’t even know bobbin tension was a thing. Also I found another video showing the difference in threads and placement on the machine. I was doing that wrong too!!

@kevinsews Жыл бұрын

You’re welcome!

@luciatat4084 Жыл бұрын

Can you please share the link to that video about threads? I’d really like to watch it!

@nicolegagnon4793 8 жыл бұрын

I'd like the thank you for the video. I watched countless videos that just popped the casing back in and didn't explain that fact with the notch and it was frustrating me to no end why mine was nt sitting right. You explained it do simply and thoroughly. My machine is all assemble nicely again.

@kevinsews 8 жыл бұрын

+Nicole Gagnon You're welcome! I am glad it was helpful.

@michaelkirwan177 3 жыл бұрын

Very enjoyable video and quite informative, too. Not to put too fine a point (no pun intended) on it, but I did notice that you inadvertently "needle-wrapped" the thread when you threaded the needle (see video). I believe this is why the topside tension was slightly greater right at the needle which created just enough added tension to create more 'pull' which drew the bobbin thread upward with slightly greater tension. Thank you for showing the bobbin tension screw's access as this is often overlooked as a common solution to this problem. Your narration was very smooth and informative as I said. Mike Kirwan - Kenmore, WA

@kevinsews 3 жыл бұрын

My pleasure! I address the issue you pointed out when I uploaded this video a few years ago in the video description area. I guess I should recreate it at some point.

@mginglessis Ай бұрын

It helped me today too! almost 10 years after the initial video was uploaded.!

@kevinsews Ай бұрын

That is great to hear! Thanks.

@nataliekatz9143 2 жыл бұрын

Kevin, you are absolutely AMAZING !!!!!! Thank you so much for these awesome videos. I was dreading , trying to adjust my bobbin tension. It was so easy, with your help. I appreciate you, so very much.

@kevinsews 2 жыл бұрын

You’re welcome!

@MechaShadow1666 7 жыл бұрын

This video saved me alot of money and a trip to the service center, and I'll be able to finish my costume. Thank you so much!

@kevinsews 7 жыл бұрын

My pleasure!

@lizz9840 6 жыл бұрын

Thank you for showing this. I learned a few things I did not know how to function on my machine.

@kevinsews 6 жыл бұрын

Great!

@mariacucu1348 8 жыл бұрын

Thank you for this video Kevin, I just bought my Singer 4423 Classic and after one day of using it my bobbin case got stuck..you have a very good narrator skills and all the time helpful ( found your Singer Classic introductory video and i keep on getting back to it every time i feel like i need to practice something) .P.S I still find the automated needle threader as easy as rocket science :)! All the best from Spain

@kevinsews 8 жыл бұрын

I am glad you found it useful.

@jennyamccarthy4 Жыл бұрын

Thank you so much for this video! I have been tearing my machine apart all day trying to figure out how to fix this! ❤

@kevinsews Жыл бұрын

You're welcome!

@ElvenPrincess2012 3 жыл бұрын

You, sir are an absolute lifesaver! I was on the verge of tears and ready to throw this machine out the window until I found your channel. Thank you thank you thank you!!!! You are a god among men.

@kevinsews 3 жыл бұрын

You are so welcome!

@sandybeach368 4 жыл бұрын

I didn't even know there was a bobbin tension adjustment. they sure make it hard to get to. thanks!

@kevinsews 4 жыл бұрын

My pleasure!

@crystalsmith3820 2 жыл бұрын

Thank you so much for this video. I didn't have any idea that you could adjust the bobbin. I was about to pull my hair out when I found your video. Thank you! Thank you! Thank you!

@kevinsews 2 жыл бұрын

You're welcome! I am glad to hear it was helpful to you.

@akmaral6459 4 жыл бұрын

Thank you so much for this video. I thought I'll have to take my machine to service center or somewhere else to fix it. But I was able to fix it with your video. Yay!!!

@kevinsews 4 жыл бұрын

Akmaral Kalambaeva That is great to hear! Thank you for letting us know.

@sandibeach7291 6 жыл бұрын

I bought a slightly used Singer4423. I can't get the bobbin case out. I tried everything and then stumbled upon your video. Thanks so much for sharing!

@kevinsews 6 жыл бұрын

You're very welcome!

@UlfKister 3 жыл бұрын

You are the Bob Ross of sewing machine instructions, man 😅 ... really helpful information, thank you very much for sharing! One more follower, too 😉

@kevinsews 3 жыл бұрын

Thank you!

@cindydyson4051 4 жыл бұрын

Thank you. After watching your video, I was able to fix the problem and finish a project in time!

@kevinsews 4 жыл бұрын

Cindy Dyson You’re welcome!

@lynnmiller8569 Жыл бұрын

A great help. I have been trying to do this for a few hours. You helped tremendously. Thank you

@kevinsews Жыл бұрын

You’re welcome!

@sharone9484 3 жыл бұрын

Thanks so much my machine is now sewing perfectly, I didn't even know you could adjust the robin tension

@kevinsews 3 жыл бұрын

You're welcome!

@ritica5 3 жыл бұрын

Thank you so much! I have been struggling with this for days and your video helped me fix it

@kevinsews 3 жыл бұрын

You're welcome!

@1954evelyn 5 жыл бұрын

Love this video I MUST have one of those tiny screwdrivers LOL you have the nicest voice, calm and soothing to watch and learn thank you for making these videos, Commenting and liking

@kevinsews 5 жыл бұрын

Thank you!

@erinvanzante2680 5 жыл бұрын

Reminds me of Ron from Parks and Rec!

@njemilesiwatu4148 Жыл бұрын

Thank you! I spent hours trying to figure out how to put my bobbin holder back in correctly

@kevinsews Жыл бұрын

You're welcome!

@beldarc7530 2 жыл бұрын

Great tension adjustment video. Thank you.

@kevinsews 2 жыл бұрын

You're welcome!

@tymartiniuk8182 2 жыл бұрын

Thank you for this video. Fixed the problem and saved me a bunch of money on repairs.

@kevinsews 2 жыл бұрын

You’re welcome!

@plantbasednm5099 5 ай бұрын

Omg thank you! This was so helpful! My bobbin case was driving me nuts! It works now 🎉

@kevinsews 5 ай бұрын

You're welcome!

@DannyWalker1949 7 жыл бұрын

This video helps me know what to do if my machine needs adjustment on the Bobbin. I sure do Thank You.

@kevinsews 7 жыл бұрын

Good deal.

@DomenicoGiordanokp 4 жыл бұрын

You are so good to explain, i have a problem with tension but even if Change needles or threads moving the wheel of tension from 0 to 9 i have always the same stitch with the same problem. The upper therad is show on the back stitch. How can I adjust it?

@kevinsews 4 жыл бұрын

Use the technique I show in the video: kzfaq.info/get/bejne/brqAdZWq392RYY0.html If moving the tension dial doesn't change the tension then raise the pressure foot then hold the thread before you thread the eye of the needle and then grab the thread on the top side of the machine and pull tight to ensure it is going between the tension disc. Then lower the foot and repeat the test.

@Blackspire_Cosplay Ай бұрын

Kevin sir thank you so much for this video. It was so helpful and easy to follow that i don't feel worried to try and fix this issue myself.

@kevinsews Ай бұрын

My pleasure!

@michaelcroley8270 3 жыл бұрын

Thank you. Simple and concise directions that solved my issue. Subscribed and shared

@kevinsews 3 жыл бұрын

Your welcome!

@maggiepypy 4 жыл бұрын

Love your videos and helpful instructions, and I don't mean to complain and seem ungrateful, but when you were adjusting the tension, all I could see was your fingers... couldn't see which way you were turning the dial or how far... I've learned a lot about the care and health of my little Heavy Duty thanks too you and would love to see exactly what and how the bobbin tension was adjusted... Thank you so much for the videos, except for this minor issue, I really do enjoy them... :-)

@kevinsews 4 жыл бұрын

Turn the screw 1/4 at a time. Left to loosen and to the right to tighten.

@marieconroy8467 8 жыл бұрын

Thank you soooooooo very much for your video! I learned so much about my new singer heavy duty. 💌. You are amazing!

@kevinsews 8 жыл бұрын

+Marie Conroy You're very welcome!

@angelaclarke5998 6 жыл бұрын

Thank you I have no issues with thread jamming now!!!

@kevinsews 6 жыл бұрын

Nice!

@kellykhallman 2 жыл бұрын

Super helpful. Thank you. I was getting SO frustrated before watching your video and taking your advice!!

@kevinsews 2 жыл бұрын

You’re welcome!

@kellykhallman 2 жыл бұрын

@@kevinsews Your dog is so cute. Thx again!

@kevinsews 2 жыл бұрын

@@kellykhallman Thanks. She passed away over 10 years ago,but she is missed.

@kellykhallman 2 жыл бұрын

@@kevinsews Oh know, I'm so sorry to hear this. Please accept my sincere condolences. 💐 Those dear hearts sure do stay with us forever. Sweet babies they are. Have a wonderful evening.

@kevinsews 2 жыл бұрын

@@kellykhallman Thank you!

@miltonmiller 3 жыл бұрын

Great videos. I was able to solve the problem after watching a couple of your videos. Thank you.

@kevinsews 3 жыл бұрын

You're welcome! That is great to hear!

@fchadney 7 жыл бұрын

Thanks! Saved me a trip to the shop! MUCH appreciated!

@kevinsews 7 жыл бұрын

You're welcome!

@heatherkennedy451 3 жыл бұрын

So helpful! Thank you so much for helping me to fix my machine!!

@kevinsews 3 жыл бұрын

My pleasure! I am glad it was helpful.

@kristinalugo3797 4 жыл бұрын

Omg this work I fixed my machine holy hell thank you Kevin ilysm

@kevinsews 4 жыл бұрын

That is great to hear! Thank you!!

@bobsmith3605 6 жыл бұрын

Even though this did help me to free up my 4452, it took hours with many tries with lots a jammed thread and disassemble/reassembles to get it to sow properly again. Once you loosed those two very tight screws, it's trail and error to get the little bracket back in the exact position for the machine to sow correctly again. I think it's finally working again but almost afraid to try it on something other than a piece of scrap after so many jam ups.

@adamchristopher7226 5 жыл бұрын

Any guidance on how to adjust that little bracket? There's quite a bit of variability as to how much play the bobbin casing has to rock back and forth.

@kevinsews 4 жыл бұрын

Download the manual here: www.kevinsews.com/download/SingerHeavyDutyServiceManul.pdf See page 19.

@lucy8025 5 жыл бұрын

Great video. It was exactly what I needed to know. Thanks!

@kevinsews 5 жыл бұрын

lucy tyler geck You’re welcome!

@orestesdd 9 жыл бұрын

I find a little bit easier to adjust the tension on the bobbin case of my Bernina 1008. Since I am thinking about buying a Janome HD3000, it seems that the same manner will be done on the Janome. Thank you for showing this.

@kevinsews 9 жыл бұрын

orestesdd Yes, the old style front loading bobbin systems make adjusting the bobbin tension much easier than top loading bobbin systems. The trade off is not being able to see how much thread you have in your bobbin and that was always an issue that people didn't care for with front loading bobbin systems.

@orestesdd 9 жыл бұрын

Thanks for all your advice and opinions. They have been a great help to me.