Requested from my Facebook group Sinnis Terrain Technicsl page how to correctly set the clutch on your Terrain. This applies to just about every cable clutch motorcycle.
Пікірлер: 10
@steventhompson3507 Жыл бұрын
Nice vid. Cheers
@OGGrinskin2 жыл бұрын
I always wondered how I adjusted that bottom portion, very helpful, thanks!
@KaylaYoung822 жыл бұрын
Great vid. Again .. can suggest for people reading comments.. 2mm free play is basically the size of a 20p coin, so I usually slip on in and then adjust the free play to that.
@silktvPDR12 жыл бұрын
Hi Kayla yes I have seen this done but I'm not sure I like this method. Putting a 20p in the clutch lever cable joint and adjusting upto that is adjusting tension into the cable almost clamping the coin. I like to do the opposite and adjust the slack as you saw by feel and looking at the lift gap. If you are confident and comfortable using that method yes absolutely but for simplicity and ease feel always wins for me. If I am misunderstanding you and you use a 20p to judge the gap only then that's a brilliant tip thank you 😊
@KaylaYoung822 жыл бұрын
@@silktvPDR1 Yeah basically just to judge the gap, would never let it get clamped or what ever that would end up doing more harm than good :)
@marksmith17472 жыл бұрын
Perfect and easy to follow. Thank you very much!
@silktvPDR1 Жыл бұрын
I'm a bit unsure what you mean with no throttle? You should adjust the clutch as shown setting the engine end first then fine adjusting the free play at the handlebars. If you mean you have no lift or freeplay then the engine end adjustment is surely out
@tonyf9076 Жыл бұрын
Had my sinnis for a year and all of a sudden the clutch bite is almost at full clutch release and the clutch arm is solid with no play, follow this vid and all should be good again right ???
@CuriousGoose Жыл бұрын
What if the arm doesn't spring all the way back? Mine seems weak and needed a lot of fettling to get right.
@tonyhouse9217 Жыл бұрын
I’ve replaced my clutch cable on my t125 2022 and now when I put the bike in gear the wheel spins straight away with no throttle needed, adjusted it just like you have and no change! It’s becoming very frustrating, any advice? Thank you 🙏