Just found your channel and appreciate this video in it’s simplicity.Thanks for sharing, you got a new subscriber. Love your honesty 💕

Love how great you explained everything. I would want my money back for sure.

I had that same problem. Called Siser and they said if you are even in the room with the hot press it will do this. They suggested that I place the mask in the freezer for 4-5 minutes before placing on the transfer. It worked PERFECTLY!!! I no longer have any problems.

Beautiful colors. Great job!

Very beautiful you did amazing job I love your shirt I enjoyed being here have a blessed evening 🙏🏽

I switched to their high tack mask. Cost less you purchase by the roll and it works perfectly. I now have two boxes of the low tack sheets and I use them for regular and iron-on vinyl. I used one piece of high tack for 48 shirts

I liked this video. You're running into the same kind of problems I run into. Thanks for showing us your experience. New subscriber here!

Great Video. This masking tip may help. I use a very soft/thin media from Siser called S-Print with my Solvent Ink Printer. During the hot summer days, I had some trouble using their TTD High Tack Mask. Then I noticed they mention on the website that it works best at room temp below 70 degrees. So on hot summer days you can put the mask in the fridge or freezer for a few minutes. I've tried exactly that and it made a huge difference!

Thank you for this review, will save me money knowing ahead of time that the mask does not work! Your shirt turned out AWESOME!

Hi! Thank you for your honest review! I usually just use leftover transfer sheet from regular htv when I’m transferring printable I have this product being delivered tomorrow.

Thank you for the video. The design is amazing. I am new to all of this and did not even order the mask but the DTV is coming tomorrow. My newness seems to have saved me. I ordered a different transfer tape from Amazon that I saw in another video earlier today so hopefully it will be better.

Thanks for the Awesome review appreciate you keep Applying pressure 💯💪🏿🙏🏿🙌❤️

I made my 1st shirt today using the DTV EasyColor and yes I love I can print from my pigment ink printer but what I don't love is when image is cut it lifts from the carrier sheet when you have moving parts! My tack sheet had no problem picking it up.. In fact it sucked it right up.. Definitely game changer.. I need my print to stick like vinyl to the carrier sheet prior to weeding.. Thanks for sharing .. about to subscribe and hope to see lots more of these videos using DTV for sublimation & EasyColor

I was soooo excited when my easycolor showed up I accidentally used my permanent vinyl transfer tape. I was scared so I used 2 pieces of parchment and and used a temp of 302 for 15 seconds. IT WORKED PERFECTLY!!!! I have now pressed over 25 shirts with easycolor and permanent vinyl transfer tape @302 for 15 seconds. It transfers perfect and does not melt in the press.

Thank you for your review. I was having problems with the cutting and found that any small cuts are not successful. You are right, it's not cheap and when you have problems with a few sheets, that is money down the drain. I had high hopes, I probably won't buy again. I was thinking this might have been the answer to avoiding going into sublimation, but I think I am leaning toward investing in sublimation now.

It's just the small things in life 😌. The crafter in me felt that when you said it.

Thank you for such an honest opinion.

Thank you very much for sharing your knowledge it very informative information... And you're absolutely amazing content creator...

This is a great video, thank you!😊

Thanks for the review! I have a latex printer and I was messing around with full color images a couple years ago. I forgot what siser medium I was using but it required some ttd. The ttd and latex ink media didnt work. So now I've been stuck with 50 yards of ttd on a 29 inch roll. Smh maybe I should start seeling it by the sheet. Lol

That looks awesome

Beautiful very vibrant I love it

Hi. I had an issue with it as well and in my update video i switched using the high tack TTD and it was a much better process

Very nice design.

I’ll be ordering more!!

Thank you for recording this. I also had the same issue with the transfer tape. I tried reaching out to Siser, but they didn't respond. Love the DTV itself but I'll have to limit using it to designs that are one piece.

Just found your video. Love, Love, Love it. I used the DTV and had the same problem with the mask. I was so disappointed with the mask because it just simply would not stick to the mask. I was so disappointed I sat the material to the side and did not complete the shirt. I had small letter that kept twisting and turn in every direction while trying to get them to stick to the mask. When one letter stuck then the other letter would not. After a while trying I just decided this is to much time wasted and material wasted when this product cost so much. Thank you for you honesty.

I’ve heard so many good things about it. But everyone’s con is the transfer tape. Hopefully Siser hears all this feedback and fix the problem.

Great results. I'm curious if set the print under heat press (without pressing) for a few seconds, should allow designto losen, then apply to transfer sheet/mask will work. Let us know. LOL - as Soon as I typed this I heard you say same thing.

I saw someone else had the same issue with the masking ..they used the cricut brayer before peeling and it worked great

Awww the baby ❤

Beautiful. I just subscribed to your channel.

Joe, from Siser, said that you print out something that has a lot of colors, and takes up your whole design. Allow it to dry overnight. You might have a problem with the mask being able to stick well on the DTV vinyl. You are not the only one having this problem with it sticking. You'll find a lot of videos with other KZfaqrs that have been doing this for years having that same problem.

I used heat transfer tape for rhinestone and it worked really well.

I got some by mistake 2 days ago.. I'll try it.. I try to make all my tshirts with a single piece.. that way I elminate the problems with the mask... thanks enjoyed the video

Looks good

You could have put a small offset on "hip hop" in Design Space so it was one connected image, then you couldn't need the transfer 'mask' sheet. T-Shirt came out nice.

I agree 1 time purchase for me :) Thank you

You have to scrape the image onto the mask in order for it to stick better. That usually works. If not I am not sure what else can help with that up issue.

Thank you for the review, I recently had to return my sub printer due to defect. So Im looking for an alternative. Also what is that paint holder? Where can I get it? 😊

you can use the frisco pattern htv mask. Its awesome with it

Are there specific designs that you need to look for when you’re doing DTV? Also I wanna do the cutting too I have scanned and cut I don’t have cricket so I have to direct cut and if it’s too intricate it doesn’t work so any suggestions or is there a website that does design specifically for DTV vinyl?

Just finished watching your video. I just purchased the EasyColor DTV and I was hoping to have some good results with the mask, but I see you are having the same issue I'm having with the Siser easysubli! I can't ever get my mask to stick to my images!

I had success with Frisco Craft transfer tape for patterned heat transfer vinyl. TTD High Tack mask destroyed my first siser dtv print.

Nice, vid. Cut settings on cameo. Mine seems to not get the corners. I even bumped my blade to 3.2 manually and still get weeding issues.

I don’t want to say I’m glad I saw the struggle but I’m glad I saw the struggle because I realize it’s not me. It’s not you. It’s the product I blame myself every time I make a mistake and I realize this stuff is expensive and it’s not always our fault.

It depends on the cut. I on explorer air 2 regular vinyl with frisco pattern mask tape

Loooove love this video. Best of all the ones I have seen. I will like an update on the wash on this specific color. I make 5 t-shirts for my daughter and the white one was destroyed by the colors. I washed it with other white shirts and the DTV was the only one that came up mess up.

So we're you able to use the easysubli mask with this? I have a bunch of that and no easy subli so if I could use that instead that would be great

Thanks for your video Immo go on and send it back now I don’t need a headache. I’ll keep using my 3g opaque for darks and vinyl for the small pieces. Sigh…I thought we had a winner

Just saw your video. The TTD mask sucks. I tried the easysubli mask and it is so much easier. Works like a dream. Hope that helps

What printer, ink and print settings did you use? I printed one… it was okay Epson 7710 Cosmo ink. 2nd print smeared like crazy. Going back to Easy Subli

A newbie here! I saw one of your reply comments arguing the sticking to the mask issue, and you said the EasySubli Mask was better, i’m trying to find the best products to buy would you recomend me get this one instead of the TTD Easy Mask for this Siser EasyColor DTV?

Any updates on the best tack sheet or roll to use?

Is it still the 6.75x9.25 image only for print and cut on Cricut?

I saw that you created the words, but how did you get them the different colors like that?

I haven’t had a problem with my masks. I did see on the Siser You Tube channel that you can let your print dry over night before applying the mask. Also, you can use Cricut transfer paper and it worked well too.

I hear ya girl! The struggle is REAL! My issue is that the letters pop up onto the mask all twisted and twirled like a static issue. So I then took the printed and cut image and set it under the heat press and the letters would lay down but then do the same thing when I tried to lay the mask on top. Threw away several images. So frustrating!

How does this hold up to washing? Would the shirt be able to take bleach after the print is added?

i want to try this, but hunny, that masking? that will try my patience! i wonder will it work with Cricut clear transfer film?

I ran out of masks one time but I had 10ft of white HTV so I cut my HTV to size and peeled off the white and used it as a mask and it worked fine.

Hello Austin, must i use the TTD mask Sheet or i can use another product?

I still haven’t tried this yet, although I bought some to test. I watched a video about it on the Mr. Crafty Pants channel, and he mentioned having a lot of trouble with the mask also, so I’ll expect to have issues when I start testing 😕 Otherwise, the DTV seems amazing!

Good evening Ashley nice to meet you four corners share your channel out and I am here

I am also having problems with the transfer sheet sticking to the design.

Which side is up on the printer?

What printer & print settings did you use for this design in this video?

Wow that shirt came out nice and vibrant! I’m wondering can I use my Cricut Easy Press or do I need to used my heat press?

Can I use my eco solvent printer with this paper? I have a eco tank 2800 printer.

We’re did you get the design

I don't know about this DTV. Although it works, but everyone have trouble transferring it. Do you find this an issue for you?

What printer do you use

I had issue with this product. After the print out I wait over 25 hours before applying the mask. My issue with this product is when I wash the tee shirt in cold water after 3 days, the ink bleed on the light shirt. Please follow up with washing your shirt. I have Epson eco tank 2803.

In the siser video for the dtv they said to let the transfer dry overnight before applying the mask

How does it handle washing?

I'm just finding this. Do you need a special photo program to do this? Thank you

How does it wash, new subscriber here

Mine didnt work either! hated it, wasted 3 of the masks not sticking at all! I dont know if it has to do with my printer being epson eco tank or if its because im printing on high quality even though i let it dry for a few mins, but it does the same to me! and im upset too!

Where do you buy this product?

I had the same problem...the mask is not as sticky as it should be. I wonder if the supplier has the product sitting in an area where the temperature works against the transfer paper... I struggled last night....and I mean STRUGGLED. but I finally got it to adhere....but I'm a bit frustrated.

I've seen a few videos where they've had issues with the TTDE MASK as well. I just received mine, I think I'm going to send it back and get a refund instead of wasting my time. ☹ But anyway, what type of shirts do you use? I like the length of the arms. And I loved your video and thanks for the real opinion as opposed to paid opinion.

yaaa same here, girllll.. i got the dtv.. and i got so upset after trying to take out the images.. ughhh... i just got fed up and threw it away.. the transfer sheet is not strong

Is it necessary to use the mask

Have you tried this paper with dark shirts?

Hello what time of printer you use?

Hello . What’s the setting for the printer ?

Where did you get that image?

Ok my question have washed it cause that wear my problem came in

I let my printed DTV dry overnight. Even a small print, I let bit be overnight. I'm not investing in sublimation equipment. This may cost about the same in the long run. Don't use vinyl transfer tape, use the TTD mask for DTV.

I didnt have problem with mask. But I got my mask from Amazon. Problem I have if anyone can help. My color changed. I printed red but after heat it was Burgundy. And didn't turn red after cool

What printer do you use??

I can’t even get mine to load in the printer. It won’t even take the DTV to print. It’s too flimsy for my epson to grab and too slick. I’m so mad I ordered a ton of it.

I used this on a tote bag, a month later I wiped it down and the ink started to smear. Why is it doing that?

I so wanted to love it but it bleeds on black or dark images...even with the correct plain paper settings

Beautiful colors

I seen a video that said use there high tack mask instead of that recommend one

Hello just watched this video. Don’t peal dev from the back. Have image face up and then peal mask.

maybe use an old carrier sheet instead of the mask

You are correct. The mask is awful. Not only couldn’t I get it to stick, the letters fell off when I turned it over to put on my shirt. And I let the print dry for 24 hours before applying the mask.

When the Easy Subli first came out, I jumped on it immediately. It didnt work as advertised.🤦🏿‍♂️🤦🏿‍♂️🤦🏿‍♂️