Today is just a short video on how to replace the grip and heater on a Ski Doo snowmobile. The basics of this video will work for most other snowmobiles as well. If you have any questions feel free to comment below.
Пікірлер: 10
@007samdog Жыл бұрын
Good video good speeding up good music awesome i’m 64 and still learning
@BTHAlaska Жыл бұрын
Thank you! Glad you enjoyed it. Hopefully I’ll actually be able to get some more videos out this year.
@BTHAlaska3 жыл бұрын
Thanks for watching! If you have any questions please ask and I will get back to you as soon as possible.
@GeorgeLanivich2 жыл бұрын
I am on the struggle bus trying to remove the old pins from the harness block! I can’t find anyone showing it comprehensively
@BTHAlaska2 жыл бұрын
So the easiest way to explain it is from the front side of the plug you have to remove the middle white cap that covers the pins then there are little tangs that lock the pins in their respective hole. If you take a headlamp and a tiny jewelers flat head screwdriver you can carefully pry the tangs away from the pins and slide the pins out. I’ll try and find a video showing it.
@BTHAlaska2 жыл бұрын
kzfaq.info/get/bejne/ariVqLSW3b65iZc.html
@tubeyou6331 Жыл бұрын
The link to the connector vid is nice but is not the same as what is on a GEN4 Summit X 850. At least mine
@tubeyou6331 Жыл бұрын
I found this vid to be helpful. More so then the generic connector vid. This is ‘similar’ to the plug on my 18 G4 Summit X. They show a 6 plug. Mine is a 4 plug. Hope this helps people. It confirmed the direction i was headed.
@winteradventures9113 Жыл бұрын
next time use a heat gun and warm up the haated grip and pull away in one piece