NICE!!! Louie ,very nice ! Thanks for showing the vidieo & all the detailed information that goes along with it ! I've watched this thing 5 times already. So feeling 20 years old again hey Louie ? Good for you! Yes it does have the real BRAAAP! Now (QA).
@PowerModzOfficial10 жыл бұрын
thanks for watching - much appreciated!
@korjosenkoneverstas548510 жыл бұрын
u are best!! i live in finland and there is very much snov on winter!! i love snowmobiling and i have too mod sled! im your big fan!!
@Racer577 жыл бұрын
Winter isn't long enough, I want more riding.
@sethbolhuis342310 жыл бұрын
love that sound, i wish i had one.
@daviddaavettila281410 жыл бұрын
That sled is LOUD! I love it! :D
@rednation202110 жыл бұрын
I love the safety squints when ur blowing out the hole.
@PowerModzOfficial10 жыл бұрын
with head turned:)
@ShreddinSleds7 жыл бұрын
you should get yourself a cooling system vacuum filler tool, you'll never worry about burping or air in your system again. plus you can leave the gauge on for a little bit and check for leaks before you go and fill the system and find out you need to drain it again for some reason.
@nickalan600510 жыл бұрын
I feel different about first gen revs now ,thanks for all the info , I'm just gonna build a mod like this now ,thanks too you I no longer need a 2014 rev.
@PowerModzOfficial10 жыл бұрын
Darn right! thanks for watching!
@jasonpaupst977110 жыл бұрын
Can't wait to see a side by side run with both the 800 and 827 to see comparison of both suspension and power
@PowerModzOfficial10 жыл бұрын
going to be fun - but i think i know what the winner will be:) until the turbo of course!
@tricky4g6310 жыл бұрын
That is frickin sweet!!! U keep me inspired to always go one step farther with my sled
@swedish_sadhguru38544 жыл бұрын
That's a perfect looking snowmobile. I loved the REV chassis back in the day, used to ride a REV 440 2006 model. Maybe I should do the same mod as well.....
@danryan31466 жыл бұрын
BRRRRAAAAAAAAAAP!!!!!! Gotta love it. Thanks for posting.
@tjcobenais29813 жыл бұрын
I have the same kit as yours in my 04 rev. Are you going to run mineral oil all the time, even after breakin?
@MillerTime-40610 жыл бұрын
These videos are great!! Inspired me to get my first snowmobile ever which is a rev, 07 summit 800....love it!
@emmanueldelescaille731 Жыл бұрын
Awesome engine you had built up
@lovemyskidoo10 жыл бұрын
You're primary clutch is were the noise is coming from. It needs a bushing kit. Alot of these clutches do that. Not expensive to fix at all. Sounds good though!
@DavidReese2ndA10 жыл бұрын
No Thermostat! The Coolant isn't going heat up, it's going to be moving so fast, it's not going to have time to heat up, only thing that's going to heat up, is your Engine, Good luck! That's why there in there!
@Ottienger9 жыл бұрын
man that thing sounds amazing... just sounds like a complete screamer. Love it
@bajaboater783610 жыл бұрын
It looks great, now you will be hooked on big bores I'm on my third. Put a Koso EGT and you can really dial in your jetting you have to come down lots from stock. Congrats
@PowerModzOfficial10 жыл бұрын
Thanks kyle, jetting starts soon!
@MKmod-hp3lw8 жыл бұрын
looked great to mee...she sounded great and ran great......nice vids
@Talisman-tb6vw10 жыл бұрын
When I rode often - I never had a helmet, no vest, just a snowmobile suit and what was worn by skiers - but we did have a full cowl to hide behind - unlike modern sleds that offer NO protection for the rider. I don't think we've evolved in snowmobile technology any..
@bigrod00692 жыл бұрын
sounds great. looks like lot of fun!
@lilljimmy9610 жыл бұрын
You are working hard on your snowmobiles. But they all are great machines. and probably need alot of attention to be that good as they are.
@Bigbansheemike9 жыл бұрын
Fresh rebuild. No heat cycles before ripping around.?
@Talisman-tb6vw10 жыл бұрын
I've never overheated a motor - but I am old school - air cooled. A water cooled motor may make more hp - but then there is the expense and weight and expense when you overheat it :P
@keithmcnasty35063 жыл бұрын
Maybe you should use your drill with 1/2" socket attachment to get those bolts down then torque to spec.
@DevinBabin10 жыл бұрын
Let me know if you ever put your projects on DVD(s). I'd buy them to watch at work between calls!
@PowerModzOfficial10 жыл бұрын
i might just do that!
@DavidReese2ndA10 жыл бұрын
and you need a pre-mixing cup, has all your mixing ratio's on it!
@yellaboi574210 жыл бұрын
that rev is bad ass louis!
@wiggy88843 жыл бұрын
Jaws can I’m guessing hahah or mbrp it’s sounds sooo niceeeeeee
@justforlaughs898810 жыл бұрын
Wow Lou you make this look easy I am having to rebuild my 2000 mach z 800 I have a bent connecting rod on the mag side I've never changed one out before I have done top ends but nothing in the bottom I got a new piston rebuild set as well is there any tips you can give me I have top end off and motor is out getting ready to pull mag off to split the case so I'm hoping everything goes smooth is there a way to get a hold of you or someone who would know these 809 motors I'm trying to save money and I believe you value things more when you put the time in and learn new things. Thanks man keep making more vids there so awesome!!!
@Paisteboy10 жыл бұрын
Great vid Louie!
@bruce93916 жыл бұрын
All the ppl complaining on how you broke in the motor and it's still brappin in alot of vids way after this 😆
@richardbentley61210 жыл бұрын
Okay thanks louie now i can go on my trip sunday
@slimjim11910 жыл бұрын
sounds great goes great awesome ride
@baseball219310 жыл бұрын
Did you do any kind of break in?? or did you just go out and romp on it right away?
@TheSomewhere6810 жыл бұрын
looks like runs good, sound great...
@Rumblerdoo10 жыл бұрын
Awsome vid as usual keep it up
@guillaumelessard434810 жыл бұрын
Great vid! keep the good work!
@FusionBoost2.010 жыл бұрын
That baby got braaaaaaaap!!!
@hummuqtuq10 жыл бұрын
You jet down with a bigger piston? Is this because your running premix? Well someone smart fill me in?
@UpInSmoke5410 жыл бұрын
He's running an RK Tek head which are more efficient.
@mikemarcotte797510 жыл бұрын
thing sounds gnarly
@mattg735710 жыл бұрын
Sounds sick man
@matthieust-arnaud854510 жыл бұрын
I believe the raddles come from the primary clutch. It did that on my sled not to long before I broke the stock clutch. Did you buy new Clutch buttons for the TRA clutch when you put it all together?
@remyboisse924910 жыл бұрын
Hi louis really nice vid. Can you do a video on jeting, how to jet your sled? Thanks
@jjamiemm10 жыл бұрын
That clutch washer is really bugging me. It's conical and needs to go on the right way
@chillrasta129 жыл бұрын
I got confused at the part where you said you were putting the coolant in pure? Typically coolant has to be mixed 50/50 with water for it to have maximal freeze protection. Believe it or not, a 50/50 mixture will provide better freeze protection and freeze at a temp much lower than pure glycol.
@Shadowmere4509 жыл бұрын
He actually use Evan's waterless coolant which does not need to be mixed. Check it out, its really cool stuff if it fits your need.
@WelLRoundeDSquarE9 жыл бұрын
Shadowmere450 yeah, pay for the water they've already added, brilliant
@seanharris65625 жыл бұрын
I'm looking at buying a used sled. Which one would be better? I'm looking at the 800 summit, 1200 mxz renegade and 800 rmk. Thank You, Sean
@bryantimms14699 жыл бұрын
I think on of the powervalves cover is upside down ☺️
@CraigArndt4 жыл бұрын
Brrraaaapp Approved.
@davegalbraith79079 жыл бұрын
In your 800 oil delete video, you recommend "Royal Purple" oil and have solely used it for years. Now you state in this video that you have been using "Irving Oil" for quite some time?
@wiggy88843 жыл бұрын
The echo holyyyyyu
@Oxide1080p10 жыл бұрын
Now you just need to install twinpipes :)
@norco160610 жыл бұрын
i wish i had a sled like that
@outlaw__nomad81287 жыл бұрын
is there any fact or fiction behind exhaust wrapping? awesome way to keep heat out from under the hood but people say it hinders performance or changes exhaust pulses. what's your take?
@ak_7.3l306 жыл бұрын
What’s that chattering noise at idle 14:19 my 2006 summit 800 is doing the same thing, I don’t remember it doing it before
@ak_7.3l306 жыл бұрын
Primary clutch ?
@fabianblake570810 жыл бұрын
I thought for a break in you have too take it easy for the first few runs not go full whelly? Just a thought what do you think?
@lukeadkinson158210 жыл бұрын
Did you even do a brake in?
@tammo027 жыл бұрын
break in dood
@snidebasher22277 жыл бұрын
Dude*
@DavidReese2ndA10 жыл бұрын
Thermostat part's probably got stuck in the water pump? Where they caused a problem?
@mrmoparrr9 жыл бұрын
Mineral on break in? Never heard that before but I believe you!
@joshlariviere87868 жыл бұрын
Yep, Mineral oil for sure on break in! seats rings properly, combusts properly, does not leave a glaze on cylinders which creates blow by! just make sure its good grade mineral oil....im speaking for older powertek models....Etecs i have no experience with...maybe they like synthetics better. Xps mineral or Legend is the only oil going in my machine!
@swedish_sadhguru38544 жыл бұрын
Also, what's the net weight of that machine? How does it hold up in comparison to newer machines like Summit 850?
@stevewilson399310 жыл бұрын
Kick ass.
@ryansaunders6619 жыл бұрын
Is the 827 big bore kit much worst on gas then the stock 800 ho?
@klasmvm49666 жыл бұрын
you obviously have worse mpg considering the cylinder portings, do you think bore kits are only the cylinder size?
@sandchar10 жыл бұрын
just like trying to warm up the old olympique
@DavidReese2ndA10 жыл бұрын
Look's good Though!!!
@AffirmedPie4 жыл бұрын
Im looking for a can for my 1993 arctic cat wildcat 700. I want one that's loud but not so loud that I can't ride trails without getting a ticket. Do you have any suggestions? I am on a budget so cheap would be best
@fordguy200110 жыл бұрын
when are you going to work on the elan? i have a 73 elan and would love to do that to mine.
@martylorenz55608 жыл бұрын
0:56 pushing a huge fart out only to get the sound the hose makes.
@smokebox17382 жыл бұрын
Hey man not sure if you’ll respond but I have the same kit in my 04 summit that I just purchased off someone. The sled runs great and everything however when I try to go above half throttle or hit 6k rpm it won’t rev out anymore the sled will fall on its face. But anything below that and up to half throttle runs great. Hopefully you could help me out thanks in advance. I was thinking maybe the old fuel in the tank
@PowerModzOfficial2 жыл бұрын
Hmm, check your FOB - might be loose - or actually its most likely your Raves not opening - check the rave valves.
@smokebox17382 жыл бұрын
@@PowerModzOfficial okay awesome man thanks for the help I’ll check that next but dumb question how exactly would I check that
@xxtruckerdanxx6 жыл бұрын
So Why did you use fiberglass wrap on the head pipe?
@maximeveilleux16510 жыл бұрын
come on mainnnnn wheres the snow !! riding in sand or what !
@jjamiemm10 жыл бұрын
Did you put that clutch washer on the right way?
@curioussyndicateband10 жыл бұрын
I noticed you have no reed spacers? My 04 800 ho has v force 3 and spacers?
@kadenreynolds3137 Жыл бұрын
that primary sounds rough at idle.
@mckalewirnsberger19104 жыл бұрын
Where do I get a valve cover like that for my 08’ summitX 800pteck
@kiakingofcars10 жыл бұрын
I see your stinson't fuel tank...I drive a fuel truck for stinsons....maybe i've been at your place before :)
@lancephelps33336 жыл бұрын
Is there any way to lighten the throttle pull on a 07 mxz 500 ss
@lethal1fmx4 жыл бұрын
What bars are on there an the seat how did you set that up
@davidcapano98310 жыл бұрын
Did you break it in? If you didnt i wouldnt have gone anywhere past 3/4 throttle
@PowerModzOfficial10 жыл бұрын
i was told to vary the throttle.
@scottcarruthers92045 жыл бұрын
I have had different rates of successful break in sessions. Done the whole baby it for 5 tanks of fuel only to blow it up first run across a lake. Have also let a fresh build warm up completely and went balls deep in powder and gradually worked it hard. 7 years and 4000 kilometers later it still runs like it was just rebuilt
@josephshaoulle6824 жыл бұрын
11:11 look like ur buddy dont look to happy copying him 😄
@ryanzoo810 жыл бұрын
u should make another channel just for riding videos
@b0rd0r10 жыл бұрын
waiting for dat to get on real good deep pow :P
@richardbentley61210 жыл бұрын
Hey louie i got a citation snd both ends of a blot snapped and u cant get the rest of it out any sugestions??
@PowerModzOfficial10 жыл бұрын
drill it and use an easy out - google it. i may have made a video of that.
@IN5OMN1AKK10 жыл бұрын
Where did you get the furry gloves!?
@mrznn49689 жыл бұрын
Is that a diamond drive Lui?
@SpOrTSfOrCe6210 жыл бұрын
Any tips on paining a rev full black?
@stevesonsalla955 жыл бұрын
what is the reason for a tunnel cooler
@jeremyday95189 жыл бұрын
So why is there only one headlight?
@appleworld97636 жыл бұрын
I’m 11 and I have a 2004 800 rev with the can and it’s pissed off
@axminister8410 жыл бұрын
Is that crankcase from the old 700cc or have you replace that?
@SnoFreaxx10 жыл бұрын
i believe its from the 800 that came in the rev when he got it last year
@skidoorox55510 жыл бұрын
What lens is that on your aviators?
@Itdontmatter695 жыл бұрын
I wish you would build my 800 ptec
@Leakingboom8 жыл бұрын
what does the sled weigh in at?
@shperax3 жыл бұрын
Not to mention you live in Ontario and modified snowmobile exhaust is illegal. Cause you know. Old people
@PowerModzOfficial3 жыл бұрын
Im on the moon - no old people.
@DominatedWord10 жыл бұрын
Did you mod all of you sleds to be mountain sleds?
@PowerModzOfficial10 жыл бұрын
Most yes - ditch bangers coming up for the next season!!!
@rstead84777 жыл бұрын
What year is that motor?
@dirtbiker923810 жыл бұрын
What year is your sled
@connerhammerberg30184 жыл бұрын
Wanta sell it
@DestoveI10 жыл бұрын
brappppppppppp
@bitchslap8009 жыл бұрын
mines already extremely loud
@berts42010 жыл бұрын
Dont like Ez Ryde louie? some guys tell me they are too loosey goosey lol
@PowerModzOfficial10 жыл бұрын
i need to have the shocks rebuilt, i'm on the fence.
@berts42010 жыл бұрын
Yea the micku's really like em but they are young, Cpt Ron tells me to go with Daryl's racer edge skid