Hey i love your vids, I am a kid and love sledding and these are my favorite vids and i agree.

Great video!!

That might hurt resale 😂

the REVs really responded well to dropping the airbox and putting K&N filters in place. about 5lbs lighter, more space under hood, cleaner air to the carps/TBs, and no powder bog.

I'm not going to tell you what to do - but I know what I would do:) Just make sure that the foam isn't acting as heat shielding.

Hey you always have great tips. You think you could make a video like this for the rzr? I'd appreciate it. Thanks

The foam btw has a small amount of foil on it... that foil is aircraft heat shielding... with out it your exhaust will melt you cowl even with all the swiss cheesing you have done, also depending on how the air box is plumed, it can be an air filter. IMO I highly recommend getting Dynomat with foil and putting it back on the exhaust side.

Do those cut outside save your sled from overheating especially on summits etc? How effective is it?

One thing you could do the adds weight but saves weight would have been powdercoating the tunnel!

I WANT A REV!

One thing I've done is on the right side inside the panel there is room to fit two quarts of oil in their containers. Right in front of where he cut out the piece for his boot. You may have to put a simple piece of metal in there to keep them in place. Why pay for oil at gas stations when you can bring your own for the day.

thanks

Like to see a mod update on the 2008 HillClimb

Great video! Should i remove the foam on the rev xp chassis to?

how did you get the mesh to stick or stay under the headlight cover

do one of these vids for the iqr !

What did you all have to do for the headlight delete?

I dont need to get rid of the heat near my exhaust... there's a hole beside the exhaust lmao, burnt the plastic a bit xD

Would I be able to take the foam out of the hood on my 05 m6 without melting my hood. There is also foam on the exhaust side sidepanel. would I be able to take out the foam and put back head tape?

How did you attatch the screen mesh to the hood around the headlight holes?

Could you do the same video but for the zx chassis

you like the shocks you got on there now

my sled is a lot wider longer and lower are all these new sleds soo slim like that

can you make a rev xp mod video

Did you paint the hood? I see scratches and I looks like it use to be green

what kind of screen material (mesh) are you using?

Which skins seat did you use.? Can't find one for 04 rev 600

Old school intro :).

509 films! check them out! They sell goggles and helmets and produce amazing sled flicks!

I used screening where some of my honeycomb fell out now i know its a pro (power)mod(z) lol

No snow gets in by the clutches with the venting you put ? Nice vid.

Ive got a 1999 artic cat 700, i really just need a livht other than that i just want it as light as possible, any suggestions?

i just bout a 05 rev 600 sdi and i have a ggb can it and it gets loaded up and runs like poo and runs perfect on the stock exhaust

where do you get the vent kit

they make snowmobile helmets, goggles, etc.

lmao just cut holes every where. rip off any extra features ,for 10 pounds 15? rather have lights

I don't know what vid to ask this but I have a very loud drone on my skidoo 1200 we. goes away at speeds above 45 or 50. exhaust I am thinking but rattles you brains. all stock btw.

Hey is there a way u can send me some sticker s like its I would love to put some on my sled

Where did you get your hoods from

My 07 blizzard has 90% of the thing he pointed out

I've got a 99 formula z 500, the tunnel is just full of huge chucks of ice would u suggest cutting a couple of holes into the running boards? I'm afraid if I don't get those ice chunck out of there soon my running boads are going to bend and dent

Do you have any tips or advice for painting the side panels on a rev? like the best paint?

My snowmobile is on steroids basically 1997 arctic cat cougar 550 80 hp and 99mph top speed I put a cold air ram intake and a supercharger it has racing primary and secondary clutches it has been geared at a race shop I cut extra hood vents screened everything raised bars plastic skis headlight delete obviously took the 2up seat off and put a single person seat on new front shocks completely new lighter skid rear suspension and 2 inch paddles increased compression cut open muffler took every restrictive thing out welded it back together makes 207hp on a dyno hits 144mph

what did you use to attach the screen to cover the headlight holes louie? thanks!

could screen door screen work

whats a snow bungie??????? it you answer that would be nice thanks -garagemods

what happend to all your Older videos before this?

What seat is that

Hello I hope you get this message and can answer my question, on my 2003 MXZ 800 I'll be driving along and it will just lose spark on one side like it fouled the plug but if I keep riding it fast and slow you know I change my Pace my RPM then it will actually come back it doesn't appear to be a spark plug AT ALL because when it comes back it runs perfectly fine like nothing was ever wrong. It pulls the skis right off the ground and it'll ride a wheelie again.

hey Louis, is the foam not also there to prevent the plastics from melting ???

Wonderimg where i can get one of those vents for the hood for my rev

what vent kit is that for the sides?

hey how did you make your running boards and stuff? is there a video?

Check out snobunje.com!

Do you know if I delete my electric start on my 500ss 2009 i still have my reverse?

how aboot canada eh

I have a 2003 ski doo rev 600 and I am wondering if I need another cooler if I want to put a beavertail delete kit on it. Let me know anyone. Thanx

1:48 that was sketchy

You need the pipe to be hot for good preformance

What bars are those?

Oh no not heat next to my exhaust!!!!!!!!!!!!! It’ll be fine.

What is a snow bungee?

As an upholsterer... that sloppy seat cover is messing with my O.C.D.

Almost seems like satire....lol

Not in the budget!

and to the person in the video, Does dropping 15lb with 325Kmh tops speeds really necessary? Are you going for the modified world record? Because your going to need a lot more then weight loss to take that, honestly you just wrecked a perfectly good sled imo, and they make Yamahas, Polaris or T cats for that, and if you need 325KMH just drop the engine in and find a freaking chain case, or belt to meshs it up. This is said, for just going out and wrecking a sled in back country for laughs.

Hack work at best.

Everything your do is for removing weight but it’s not gonna make your experience better, it’ll make it worse. Removing your headlights makes you not able to drive at night and the only benefit is removing weight but why sacrifice being able to drive whenever you want for some weight?

What happened to this channel and this guy? It used to be cool stuff like this and projects etc and now it’s nothing or really weird stuff?

#1 mod for ski doo sleds, unscrew gas cap, junk the rest of the sled, screw gas cap onto a Polaris.

Just buy a polaris. ; )

terrible "mods". The title should be "How to wreck a perfectly good sled."

Terrible video. Its little all weight reduction

Btw you ruined a perfectly good sled. Looks like shit. Wouldn’t pay a penny over 500 for that.