Great tutorial!! I watched several and I liked that yours goes into some testing. So many tutorials just rush through the process and then when you get to the end and it doesn't work you have to watch it over and over to figure out where you messed up. I liked that you designed the video like that.

Thank you! Only thing I would have added is a quick note that you need to add a comment about the PIO extension needs to be added to VSCode but other than that, this is perfect!

Great explanation. It helps to run this video at 150% speed.

No other tutorial tells you how to get marlin on your new board. Thanks a million! I spent the last 3 days making changes trying to fix my marlin setup and now realize i wasnt changing anything.

Watch with 2x speed and it's a fine video

Thank you for talking slow and clearly. I understand English, but everybody knows, other Languages are difficult to understand if the Speaker speech fast and unclear or an dialect. Great tutorial, I hope I can set up my SKR 1.4 Turbo on my Ender 5 with it :)

Had to check I had this at the right speed. Sounds better at double speed.

This was awesome! I’ve tried countless ways to get this onto my board all would give me so many errors! So thank you,

Thank you for these vids! I'm completely new to this and wouldn't have got this far without your help. I don't have the compile/build icons at the bottom of VS Code. The bar is there with two error icons, but that's it. Oh, fyi, if your PC doesn't see the board via USB, try pushing the SD card all of the way into the board. Only took me about an hour to figure out lol.

I love that You are talking so slow, so i can understand everything :D

When defining the motherboard an alternative to going to source>core>boards.h you can change it in configuration.h by highlighting the motherboard, left clicking, and click "go to declaration" which opens boards.h

T hanks to your great diction I could speed you up to 1.25 and still understand you. Great work!

Thank you so much for this description. Its great to know all the differences and performances. Whats the difference between 1.3 and 1.4? (since they use same chipset)

Thank you, this helped me a lot. Alway's great to have some good source of infos like you on youtube ! :-)

Thanks for this guide. You didn't mention that PlatformIO is required to compile this. Found it by accident

Hello there. I have a Skr v1.4 turbo card. The SD card partition on the card does not work and I cannot assign software. What do you think is the reason for this

Hello, I completely have done what you did this video. So I try to auto home but the step motor has a voice like dıııııt. I use SKR 1,4 turbo with ender 3 pro the step motor drivers is DRV8825. I tried many things I can move X Y Z extruder axis one by one but when I selected auto home it gives an error just stop every axis and the prınter do nothing. How can I solve this? Thank you for your help

hey hows it going chief, so when i get to the part with the lpc1769 build or upload. Where your cursor is on that blue bar. I don't have any of that on mine. So I tryed to manually command assuming that those are just shortcut. Now when I right click on "lpc1769" and it is highlighted, I choose "command palette" and search for the task "upload" but no results, than I search for "build" select "run build task" and I get pop up messages stating the action cant be done. I must have watched this video 60+ times, I can not figure out what I am doing wrong. I am assuming the blue bar missing all the prompts that you have, has got something to do with it.

Very helpful to get me started....THANK YOU!!!!

I think I got it. Forgot to install the platformio. Thanks again!

@Edward Braiman , you are so clear it’s a pleasure to listen to you, all this worked like a dream. The only issue I’m having is how I can power the board with 12vdc and send g code commands via usb. My tft 35 v2 won’t connect so I’m working blind. I’ve tried the quick fix on that with the baud rate but that hasn’t worked. If I could power the board and send commands with usb then I could use repetier host to setup my printer. Do you know if it’s possible to do that?

The video is helpful but, why are we only changing 1 end stop? What's the differents between that endstop and the others? Oh and as soon as I plug mine into the pc nothing comes up on screen like yours does, device manager shows it but there's no drive letter or anything.

i have a question, i bought the skr 1.4 turbo boardwith the 2208 steppers to upgrade my cr10-S, if i follow this tutorial correctly, can i just compare the 2 marlin config files afterwards and make the required changes, and it should work correctly?or maybe a possible video for the cr10-S? thanks.

Hi Why is it that when I hook up the SKR 1.4 Turbo to my computer it will not find any files on that drive at all and tells me (please insert a disk into USB drive (E:) I changed the red jumper over as you showed. No matter how many times I try it tells me the same thing. I have tried different USB ports. So where do I go from here?

I like all of your tutorials! i have a question about motherboards. I recently ordered an SKR 1.4 PRO board with some ad ons.. i was wondering if the pro is the same thing as the turbo....?

8:11 it would be so helpful if you linked the video you were referencing, I could use it right now.

Failed terminated with exit code 1. unknown motherboard set in configuration.h each time I redownload a new copy and redo it seems to get worse

so generally skr v1.4 and turbo version are same in wiring, just about chip they are different. thx

Great information! keep sharing.. appreciate your efforts :)

it is not working i tried every thing i have SKR 1.4 Turbo and a tmc 2209

fantastic video, finally someone who does an a, b, c style video that is easily followed! how would I go about adding in for the TFT35 for the ender 3 pro replacement?

Im Getting this error; Connecting... Connecting... Could not connect to COM1 at baudrate 250000: Serial error: Cannot configure port, something went wrong. Original message: OSError(22, 'The parameter is incorrect.', None, 87) the first 2 are other baud rates, what is wrong?

i dont have platformio.ini at 8:54 how do i put it there?im so close

Just ordered this little beast and 4 TMC2209s...can't wait to have them delivered and try them out!

got passed that part now theres no compile option just the last two icons please help

I can't connect via ISB can you help umderstand what's wrong, the pc says its no recognising the usb

Are the dual Z's in series or parallel ? Great videos btw, very helpfull and educational !

Hello, I have a problem on my side to install the firmware on my BTT SKR V1.4 Turbo. I followed the manufacturer's instructions before turning to your tutorial and a few without success. I have a TFT35 V2.0 which always tells me "No printer attached" despite my multiple attempts. I also in doubt changed my micro sd card without success. Do you have any solutions or advice to give me?

I have a problem: in Visual Studio Code, the command bar necessary to compile the configuration does not show in the lower left corner

Hi there I have a question which has baffled me for well over a week, I have a SKR 1.4 board but I have no connectable stepper drivers, I’ve been trying to compile my board in VS Code and I’ve got everything working my BL Touch is fine my filament sensor is fine and my TFT35 dual screen is fine BUT I can’t get the axis to move what do I put as my drivers in VS Code what are the default drivers called which come with the board? I’ve tried TMC2209/ TMC2208/ A4988 etc but it don’t work at all please help, I have a SKR 1.4 not the turbo version Edit cause it may be confusing: Basically I have no steppers at all there’s no drivers plugged in so what’s the default settings for the driver on the SKR 1.4

Hello !!. Very nice and helpfull tutorial. I can't find the way to write the edited configuration for my DIY 3D printer on motherboard V1.4 (directly) or via an SD card. The message the terminal shows after pressing the Upload button is: "Error: Please specify `upload_port` for environment or use global `--upload-port` option. For some development platforms it can be a USB flash drive (i.e. /media//) *** [upload] Explicit exit, status 1 " Thaks you very very much !!!

Hey, I have this board, but I can't install any firmware because the bootloader is missing. Do you have any idea about??Mike

Mam problem: w Visal Studio Code nie pokazuje się w lewym , dolnym rogu pasek poleceń konieczny do skompilowania konfiguracji

Hi Ed! Great Video! Helped me get my turbo on my ender 5 plus up and running. One question though...Do i have to change the board to usb power every time i want to flash the firmware? Because it won't flash at all from the sd card. If so do i have to remove it from the printer every time i want to this? I hope you get this. I know it's an old video.

The Y-Endstop is changed by the X-Endstop in Pronterface. I checked my Marlin config and everything is maded like your guide. Why is it changed by Pronterface??? Great thanks for the video.

Well, it seems to actually be getting bigger. Soon enough it will be the size of my computer so it can live up to the BIG tree tech name.

Have you had success using the BLTouch with the dedicated probe pin on the 1.4? It doesn't deploy the pin when it home so nozzle crashes into the bed when all the pins are defined properly and #define z_min_probe_uses_z_min_pin is commented out

Hello Edward, I have a question. Can I also use a capacitive sensor for auto bed leveling on this board, and how is it connected and configured? Thank you very much for that.

Hola hice todo eso que dices y no me compila el Visual Code. Hi, i did all that you said and i can compile on SKR 1.4Turbo.

Hello! Can you send me a copy of the FIRMWARE (2:50) file on the sd card that comes on the board? I formatted the sd card and lost the FIRMWARE.

My SD card doaen't load, any advices ? it said " attach media" but nothing appends when selecting it ... everything is allright but that.

Thanks for this video 👍 I have some questions, I want to make my own 3d printer like Ender 5, but with 3 Z-AXIS, 3 Z-endstops for real auto leveling and 2 extruder. Can I realized this with this Board ?? Where I do connect 2 more Stepper driver and endstops? Or know anyone a other not so experience Board that can manage that

Thanks for this, getting the error: 'EthernetClient' does not name a type , and error: 'IPAddress' does not name a type

Hi, may i ask, ive followed the exact same steps you have outlined but on pronterface my printer is still not online? why is that so?

thank.

Hi, do you know which FAN outputs I can configure for HE and part cooling? and also, where to configure them? Ai did not find them in the board config. Thank you.

Hi, as there is no example config file for the skr1.4Turbo board in Marlin configs, what settings do you need to change in the stock bugfix firmware ie what type of LCD is used, Bed Size and so on..... Thanks

Hi! thank you for the video it's very helpful but I had a quick question I hope you could help me answer, I'm currently upgrading my Tronxy X5S to a better board but I'm trying to find one that can have 2 Z end stops because my printers Z uses 2 motors to move the entire bed and using one end stop can let the bed become un-trammed. is it possible to switch one of the power dedication pins into a second Z end stop? Thank you for the video and have a good one!

Great tutorial. It worked great for me untill 2 wks ago. Now I can access my my SKR1.4T with Octoprint but it no longer shows up on my PC as a "Disk Drive". Also, when running the SKR using the TFT35 in "Marlin-mode", the SD card will not show up. So, I haven't been able to load new MARLIN code (with minor tweaks and updates) to the SD card by direct connection. Furthermore, when I put "new" firmware.bin files onto the SD card using an adaptor and return the SD card to my SKR SD slot, the board will NOT update to the new code. FIRMWARE.CUR and firmware.bin remain 'unchanged' on the SD card even after multiple resets and power cycles of the SKR. So...I thought I have ordered an STLINK V2 programmer and will try to use that to regain access to the SKR. Ed - Have you ever used the STLINK device? Do you have or woruld you consider an instructional video on this topic? Keep up the great work!

Great video--Is the process for installing TMC2208s the same between the 1.4 and the 1.4 Turbo?

Hey Edward great video! After trying to upgrade my ender 3 with this board my screen just shows a blue screen. any ideas on how to fix this??

Hello Edward, thank you for this video. As always, it has become a very detailed tutorial and has helped me very well. Could you please make another video in which you show the how to configure the fan pins? Thank you very much in advance.

Hi , in my tab I dont see platformio.ini ... Is it something I have to get separately .. thank you

how do you know the "latest release" did not contain the build for 1.4Turbo?

I need help, can someone help me with the firmware of SKR 1.4 Turbo, TMC 2208 UART for a CR10-S?

Ahaha this thime i got everything working (BTT SKR1.4Turbo+tmc5160s) before your actual video. First time since i'm playing with skr boards :p

Hey, you're videos are really helpful. But I have now a problem with my marlin configuration on my skr 1.4 turbo. I do everything like in your video and from rics 3d. But when I'm compiling the data there are a lot of errors with the pins. I only see that there are issius with pins in relation to the LPC1768. But I have difined the LPC1769 in the Software. I can't find my mistake. Please can you help me? Best regards and thanks Jochen

i dont have the upload button on the bottom. the only thing i have on the bottom is the error number icons and the icon for "refreshes the action buttons" i installed while trying to figure out how to get the upload button on mine.. This is where i get stuck every single time because i dont have that option..

Great Video. I have followed it step by step but getting an error when I try to switch the drivers. i have (4) TMC2208. can you help me understand?

Hi Ed Sorry to bother you again... I tried flashing with jumper in psu position. Computer doesn't see the usb drive. tried it with usb power as well.. still doesn't see the usb drive. I read somewhere that these boards sometimes won't flash if they are hooked up. Not sure if that's true or not. I just don't understand why it's so hard to flash these boards and why they won't flash from the sd cards. Oh well...thanks anyways. Guess I'm gonna have to uninstall it to flash it. Seems to be the only way it will work. Thanks again.

Hey a reddit link brought me to you! This is Manny

great video !!! easy to fallow and you cover all the steps. I have been trying upload the firmware but in Vscode I get a "build failed unable to configure the project" any suggestions

Hi Edward, great video, however I'm still having trouble compiling the firmware for my SKR 1.4 Turbo. I receive error messages stating { "message": "#error \"SERIAL_PORT_2 cannot be the same as SERIAL_PORT.\"", and, "message": "ISO C++17 does not allow 'register' storage class specifier [-Wregister]", I somehow corrected this error and encountered many more pertaining to the TFT35. Any ideas?

Do I leave the Y min open all the time or change it back to false?

i'm using a tevo tarantula, and when i power up the board, the screen turns on but nothing shows up on it and it makes a weird noise. Do you have any idea how i can fix this, do i have to change my screen type somewhere in the firmware?

nice video am trying to do the step with printun with my mac it says its not good for this ver of mac

This is a great tutorial. Thank you for putting this together. Is there any reason that I would get an error saying "Cannot find build task", or "No task to run found."?

Is the Turbo and the 1.4 the same in terms of firmware changes?

Hey all, im currently upgrading am6 to 2 in 2 out dual extrusion, i have motion and bed heating working but the hotends will not heat up at all. As far as i can tell the cartridges and thermistors are ok. Could this be a firmware issue? I have 2 extruders and relevant thermal settings enabled. TIA

Thanks !!!!!

After uploading vscode says that it is complited, but motherboard still doesn't have software. What am I doing wrong?

Hi there Edward, nice video, i have seen it like a milion times now, but in the beginning of your video you say i should see the firmware on the board in explore, but i cant see any thing, the computer call the board DVD drive F:, and if i click on that it says ( please insert a disk in F: ), do you have any idea of what i can do about that ?? Greetings Rico

Thank you for this tut i have one question when connecting tot the computer must i not install the driver? Because mij pc is not finding the correct port fir the board

im having an issue when i try to connect to pronterface. i click connect and it just says connecting indefinitely..

hey there i need some biiig help. i´ve been trying to seup the skr 1.4 turbo for over 3 months but i can´t Z and Y to home. already cut diag pin, endstops work perfect with M119 my printer is an anet a8 plus, skr 1.4 turbo with tmc2209 v1.2 BTT stock display

Great video, I just got this board and the 3.5 screen with 2209 stepper drivers. I want to put this in my geeetech a20m. Do you know anything about that?

did you install any driver for connect to pronterface? ı have skrv1.4 turbo and marlin 2.0.5.3. port is correct, baud rate is 250000 like in marlin but ı cant connect. it is just say "connecting..."

says errror then goes to line 20and says #include errors detected. Please update your includePath. Squiggles are disabled for this translation unit (C:\Users\k\Downloads\Marlin-bugfix-2.0.x (1)\Marlin-bugfix-2.0.x\buildroot\share\PlatformIO\variants\CHITU_F103\wirish\boards.cpp).

i want firmware to these board Drivers bigtree 2209

Just in time! My 1.4 Turbo will be here tomorrow. Thank you. I'm only worried about figuring out how to install the BL touch since i cannot find much about it with this board. Is it the same setup as the 1.3 minus the pins?

Is there a video for driver chip install and jumper setup ? (SKR 1.4 turbo TMC2208 v3.0)

Wish this covered sensor less homing.

Hi, Thanks for the video. been having some issues with my skr 1.4 turbo - trying to get the part cooling fan to work - I connected it to the fan0 slot (p2.03) - and it's always on - the green led right Next to the port is always on - is that normal? Or is it a faulty board. (tried the stock firmware and modified.. Cant get it to work)

Very interesting tutorial but I encounter a problem when I want to load the firmware on the SD card, this specifies: "Error: Please specify` upload_port` for environment or use global `--upload-port` option." I may search the net and I can't find anything concrete. maybe you have a solution to this problem?

getting an error -Please update your include path

So far everything is going well but for whatever reason right at the very end you have the the build and platform icons at the bottom left corner of the status bar. I dont and I can't seem to find them. So I can't test and send. It is super irritating being the very last thing to do before finishing. I'm sure its something easy and my dumbass is just not seeing it. Yup 1 button click to being done and can seem to find either of those 2 things lol

Hello, everybody, i have the latest version of marlin but there is no skr 1.4 turbo in it.

skr v1.4 support mks tft32 ?

Hi, I have problem with usb driver. My windows 10 will not accept installing it

Looks like the Turbo is quite a bit smaller, but other than being 20Mhz faster there should be no difference at all between them?