SKYNETIC PIAGET 2 3D - BUILD, TIPS, FLIGHT and REVIEW

Рет қаралды 1,210

Күн бұрын

In this video I show you how I built the Piaget, show you some build tips, take it for a test flight and give you my thoughts!!!
Where to buy...
www.motionrc.com/products/sky...
VIDS YOU MIGHT LIKE!!!
Building & Jumping a 45 degree RC ramp with my son...
• Building and jumping a...
Hobby Plus CR-24 Review
• Hobby Plus CR 24 - MU...
Panda 6x6
• Panda 6x6 ~ Run, Unbo...
FALLEN CITY BUILD (Hardest 1/24th crawler course in the world)
• 1/24th Crawler Course(...
My TikTok...
vm.tiktok.com/ZMdxc98v5/
All instructions, tips, advice and actions portrayed in this video are for entertainment purposes. Viewer takes full responsibility when duplicating any or all instructions, tips, advice and actions.
Please
SUBSCRIBE… After all its one of the few things in life that's FREE!!!
LIKE… If you had a good time and enjoyed the content!
Ding the Bell… To stay notified when new videos are uploaded!!!

Пікірлер: 14

@userTJ39780 5 ай бұрын

You're talking about "Wing fences." They popped right off of mine on takeoff, so I glued them in. It's faster and a bit harder to control without them.

@DaddysRCAddiction 5 ай бұрын

I heard them called drag rudders as well… whatever the real name is I’m not sure but they do help with control of the plane… I have several others without the drag rudders and you can definitely feel the difference. Thanks for the comment and Happy flying!

@JamesAnderson-fe8yu 8 ай бұрын

I have been gifted(!) a Skynetic Piaget II by a fellow club member. Unfortunately he wasn't sure of the c of g position! I wonder if you cn help/ Thx in advance.

@DaddysRCAddiction 8 ай бұрын

NICE GIFT! Well if it is the same as mine it should have 2 slits on the lower fuselage in front of the wings for a velcro strap(to hold the battery)... just about center of the slits should be a good starting point to find your aircrafts CG... it's roughly 114mm back from the nose... all airplanes are slightly different so play with it a bit... This planes handles great, you will enjoy it!!!

@bhgant813 Жыл бұрын

What type of glue are you using?

@DaddysRCAddiction Жыл бұрын

I use welders foam safe glue or Beacon foam tac glue… Sometimes the instructions will suggest a thin or medium CA and an activator but I like the flexibility and versatility of an all foam safe glue like the ones I mentioned above. However you do have to wait for it to dry. Please Subscribe, Like and Ding the 🔔!!!

@1212354a Жыл бұрын

I had to shave a wedge out of the rudder to get it to budge!

@DaddysRCAddiction Жыл бұрын

Thanks for the comment! Sometimes with cheaper models there is a bit of finagling as you see in my vid and your own experience… but this particular plane is so worth the bit of extra work. Have you got it in the air? How do you like it’s flight characteristics? Please Subscribe, Like and Ding the 🔔!

@userTJ39780 5 ай бұрын

I had lots of trouble with a prop saver (2 rubber bands and it was still hardly able to stay in the air), so I hard mounted it. I love the plane, and flew it all summer on a 2S 800.@@DaddysRCAddiction

@DaddysRCAddiction 5 ай бұрын

Yea, some times adjustments are necessary even in more expensive planes.

@JamesAnderson-fe8yu 8 ай бұрын

ps the onboard battery is a 7.4v-2s-450mah

@DaddysRCAddiction 8 ай бұрын

2s 350-600 mah is recommended… obviously different batteries will require a slightly different location to get the correct CG… the esc on mine is rated for 2-3s… I think in the video I used a 3s 500mah. Have fun!

@_lark 7 ай бұрын

i’ve owned the piaget II for a year and it can run 3s i run mine at 600 and it changes the performance a lot compared to the 2s batts the esc can handle 3s

@DaddysRCAddiction 7 ай бұрын

@@_lark yes, that’s why I just went straight to 3s for more power. Please Subscribe, Like and Ding the 🔔!