SLAMMING My F100 For UNDER $100! Part 1: Disassembly

Рет қаралды 40,819

5 жыл бұрын

FOLLOW MY INSTAGRAM FOR THE FINISHED PRODUCT!
INSTAGRAM
-@thecraig909
-@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Music By: LAKEY INSPIRED @ / lakeyinspired

Пікірлер: 145

@Thecraig909 5 жыл бұрын

The amount of work that went into this project was crazy. I wanted as much detail within these videos as I could for those actually considering dropping their F Series which is why I split the videos up. The next video will be out soon! Stay tuned everyone! (WATCH THE LAST 30 SECONDS FOR A SNEAK PEAK!)

@americanbullets488 5 жыл бұрын

The bad thing was it was my mother's mustang....HER mustang he's lucky he didnt die.

@americanbullets488 5 жыл бұрын

🤔😂👍

@denverkline8987 5 жыл бұрын

Thecraig909 whats up with the ecoboost emblem on the tailgate lol. did you get bored and just stick it on there or are you planing for a turbo setup?

@engir63 5 жыл бұрын

I stayed to the end and that looks really good

@theplace8507 5 жыл бұрын

I got a 1967 F-100 short box im building with my dad im 15 any suggestions im building a ford 390 Fe and It will have a Dana 60 with a posi in it and a automatic transmission I just need to get a cab corner re done because the driver side rusted out same with both doors it was a ranger package which I plan to keep most of on the truck any ideas.

@snake-addiction 5 жыл бұрын

Looks great, don't let the negative comments affect you. It's built for your pleasure not ours. You just give us the privilege of watching. ✌

@Thecraig909 5 жыл бұрын

Appreciate the kind words Adam!

@gabrielelquintero1475 5 жыл бұрын

Better release part 2 already 😤 I’m done watching part one I need more

@deatherageperformance8367 5 жыл бұрын

Hey just give you a heads up you you need to buy a shorter set of shocks if you hit a bump you're going to get crazy bump steer and it will make the vehicle ride a lot better

@parkerjanelle7853 5 жыл бұрын

I was sad Roadkill got taken off KZfaq, but now I have this!

@aftershock2222 5 жыл бұрын

That parking cable removal trick is handy, thanks.

@leviwoodring6101 5 жыл бұрын

Thank god its not to low.Looks pritty good. It's not dragging frame and ant on 22s so I like it

@brandondannys-menary3678 5 жыл бұрын

levi woodring agreed 100%

@rxbu4149 5 жыл бұрын

Looks awesome! Might have to do this to my f-100.

@toastii3400 5 жыл бұрын

can’t wait to see the finished product!

@sethlincicum1342 5 жыл бұрын

This is awesome, the truck is amazing!!! Great video dude!

@angelg422 5 жыл бұрын

Honestly to just know how far you’ve come from the beginning is just awesome to see AMAZING PROGRESS with the truck and I hope to see the rest coming soon...KEEP IT UP!!!

@1manshop335 5 жыл бұрын

Dropping my 68 GMC this summer great video and man that looks soooo good

@HammerPowered 5 жыл бұрын

Not sure what it is, but 2wd trucks look so good lowered. It'll look sharp man.

@Petrol360 5 жыл бұрын

Man can’t wait to see it all going back together in time to make the show! Nice trick with the brake cables I will definitely be using that next time! Also tag looks right at home on there!

@slammedpassion9157 5 жыл бұрын

This is what we have been waiting for 💯

@jarrettphelan1470 5 жыл бұрын

The same way i lowered my 1990 f150 a grinder, a stick welder, and some old well pipe casing for the notch been running it for almost 2 years that way and its still strong. Cant wait to see yours after you get that vic swap done!

@jamesmcclain5441 4 жыл бұрын

I have a 69 f100 and want to do this to it, did you bend the beams? And if I just place the leaf springs under the rear end only and not do C notch cutting how much coil should I cut off the front?

@luketeverino6085 5 жыл бұрын

Looks awesome man! Good luck with finals soon

@jamieround2072 5 жыл бұрын

am wondering if u consider changing the rear or all 4 to disc brake's........????

@connorlovejoy2951 5 жыл бұрын

Looks friggin sick man. I love it.

@americanbullets488 5 жыл бұрын

Awsome vid bro!

@ClassicRideSociety 5 жыл бұрын

I like them stock height but dropped looks good too

@ronaldroybal6091 5 жыл бұрын

That looks freaking awesome Craig!!!!

@openhighwayproductions 5 жыл бұрын

Cool. I would drop the front just a wee bit more IMHO.

@americanbullets488 5 жыл бұрын

Yes love it craig!

@eanhartman9574 5 жыл бұрын

Very impressed by this video dude. Keep it up!

@mattdrendel3127 5 жыл бұрын

That looks so sick. It looks better than I even imagined it would.

@omar_padilla 5 жыл бұрын

Thank you for that spoiler!!!! I was dying to see how it came out, and man that shit looks hard my boy you guys did a good job.

@mcdlt8414 5 жыл бұрын

Fucking awesome my dude, love it, can't wait for the other parts

@andrewcampbell753 5 жыл бұрын

That looks way better!!👍🏼👍🏼

5 жыл бұрын

I was thinking if you can make a disc brake conversion on your truck.

@DJf-vh6hp 5 жыл бұрын

I did the JDM drop I beams and lowering shackle and front leaf spring perch while I was at it I also swapped out to 76 disc brakes in the front Direct bolt-on love your videos keep up the good work

@DJf-vh6hp 5 жыл бұрын

DJM not JDM

@andrewcunningham8121 5 жыл бұрын

What size cooper tires you run. Those are bad ass. Love the steelies!!!!!

@dallasdelano8235 5 жыл бұрын

Looks good!

@paulaleshire4926 5 жыл бұрын

I'd love to know what the ride height was before you lowered it, and hopefully the ride height after? You really got me geared up to do the same to my 69 short box!

@mmatma31 5 жыл бұрын

Looking good what size was the nut for the front sprint at the bottom

@mmatma31 5 жыл бұрын

Spring

@wild_willy_from_twin_city4526 5 жыл бұрын

If you flip the axle left to right, right to left forward will be reverse and reverse is forward.

@wild_willy_from_twin_city4526 5 жыл бұрын

@@classicstangbrn8964 think about it,....

@jadenrhines234 5 жыл бұрын

I did this to the front of my f100. It still drives really nice!

@eshaneowens 4 жыл бұрын

Just found this video because im beginning work on my 67 F100. Then I heard you mention Bartle Skeets, and then I saw you have the exact same ford racing tag on the front as I do. Its fucking destiny. Subbed. Looking forward to watching many more videos.

@pmr413 5 жыл бұрын

Great tip using the fuel line clamp on the E brake cable.

@scottlavine1530 5 жыл бұрын

sweet trick to getting the e brake cables out. truck looks amazing

@rogerhill5054 5 жыл бұрын

It looks awesome lowered good job.

@poppy6788 5 жыл бұрын

What size wheels and tyres are you running?

@dantheman9395 5 жыл бұрын

Looks AWESOME

@huntsman5226 5 жыл бұрын

That trick with the break cable was a great idea thanks for the great video

@classicstangbrn8964 5 жыл бұрын

Hey Craig did you make it the Fabulous Fords?

@ThatGuyWithTheFords 5 жыл бұрын

That Eco Boost emblem got me 😂

@malibubarbiie1111 5 жыл бұрын

Cut 1.5 coils out of my 69 camper special and pulled a couple leafs in the rear, sat raked and drove great still. Prob could have used shorter shocks like mentioned before

@rodgracia5797 3 жыл бұрын

That looks awesome, does anyone know of a shop or some one that can do the lowering on my 74 f100

@kml2057 5 жыл бұрын

Would this same technique work for a dodge d100???

@themodernadventurer4320 5 жыл бұрын

Klarence P42013 I would assume anything with a frame lol

@coleslaw110 5 жыл бұрын

Now it's really lookin like a hot rod. Looks friggin sweet

@SuperGentry12 5 жыл бұрын

Do you think this would work on a 1977?

@jimbirmingham6287 5 жыл бұрын

Looks good

@larryhoffman5066 5 жыл бұрын

Looks great

@japple6779 5 жыл бұрын

im redoing my engine bay and motor right now but this may have to be next!

@gutierrez2426 5 жыл бұрын

I like the eco-boost decal 👍

@nelsonramos2218 5 жыл бұрын

awesome bro 👍

@BluecollarOtaku 3 жыл бұрын

12 point deep socket to remove brake cable.

@fbs1926 5 жыл бұрын

O man this job looks like some intensive work but the pay off looks sooo good it’s worth it👌 dam she’s sitting low and slow now lol.

@americanbullets488 5 жыл бұрын

I loved it how it was though. Dadgum

@jakobwisser7074 5 жыл бұрын

that thing looks badass

@UNITEDBYTRUCKS 5 жыл бұрын

Great move! We love a good slammed classic truck over on our channel.

@sweettee3647 5 жыл бұрын

I had to have my drive shaft cut after flipping the axel. You might have to do that.

@apocalypse92ia 5 жыл бұрын

That giddiness he gets at 4:47 brings a smile to my face

@Thecraig909 5 жыл бұрын

It was an incredible moment

@roaenokesyzlak7828 5 жыл бұрын

I love your Roadkill approach "We have somewhere to be on saturday, its Wednsday, and we're tearing the suspension out"

@brucedrake904 5 жыл бұрын

EcoBoost on the tailgate priceless lol

@corygentry2850 5 жыл бұрын

Power wagon and ram charger were r they that

@frederickgilmore6329 5 жыл бұрын

While you're at it, why not put on a disc brake conversion on the front?

@yermoffroad 5 жыл бұрын

If you literally flip the axle all your drive gears would be reversed and reverse would be forward

@4ndy530 4 ай бұрын

You'll need a matching duel cab long bed to tow that rig!😂👌

@Thecraig909 4 ай бұрын

Check my latest video hahahaha

@Viktorrhansen 5 жыл бұрын

Now you just need some wide johnnys to fill out those fenders!

@bigfootgarage2201 5 жыл бұрын

I thought youwere doing the crown vic front end?

@malcolmadams2162 5 жыл бұрын

Jacob Shelton I did too

@stephenparker8460 5 жыл бұрын

Congratulations you’ve caught the lowered truck bug, things will only go down from here😁

@bss3030 5 жыл бұрын

I have a 1972 Gran Torino sport! I’d also love to have that galaxy!!!!

@merritts3515 5 жыл бұрын

If she didn't ride like a buck board before. It will now 😂😂 my friend did this and oh ma goodness you felt the road lmao. But our backs are young so 🤷‍♂️

@bradbusch9585 5 жыл бұрын

Sweet

@shartne 5 жыл бұрын

What happened to the Crown Vic frame?? Thought you was going to make this truck awesome with a Crown Vic frame.

@americanbullets488 5 жыл бұрын

We just got done fixing my bed on her 20 min ago man!

@skinmachine9718 5 жыл бұрын

Aye KZfaq recommendations working decent today

@robertmarcial4810 5 жыл бұрын

Welcome to the pain of slamming brother!

@alexthompson4853 5 жыл бұрын

That’s funny my 1970 f100 set about like at 5:30 (profile picture)

@brandondannys-menary3678 5 жыл бұрын

Love the eco boost sticker lmao

@JT-bl2so 5 жыл бұрын

wish we had video cameras when i was young doing this..

@physcobillycadillac228 5 жыл бұрын

Awe man dude. I cant believe you did that. The truck was awesome before it was dropped

@americanbullets488 5 жыл бұрын

Stepdad just backed in to my truck.....its the one on my profile picture.

@bradgotch 5 жыл бұрын

I’m in 7k so far for my 60 f100 ifs front 4 link rear coil overs. Under $100 sounds good.

@NikolitheRussian 5 жыл бұрын

My f100 is about as tall as yours but it's a longbed so it doesn't look too bad. I also may end up doing a 4x4 conversion at some point so I'm going to leave it. That being said, I'd love to get a slammed shortbed just like yours. Mine's a 78 as well so it's a bit uglier than your truck

@CrewCabKaleb 5 жыл бұрын

you should make the wheels fit flush

@jodiewhitehead3750 5 жыл бұрын

Where is the crown Vic frame

@mattb2179 5 жыл бұрын

Ugh drop tease! I'd have watched the whole video.

@mr.dankman5892 5 жыл бұрын

But but I like movies Craig lol the truck is going to look fucking awesome

@classicstangbrn8964 5 жыл бұрын

I thought you were going to Crown Vic front end.

@AnthonySvt_ 5 жыл бұрын

I thought you where doing a frame swap

@mattduncan2821 5 жыл бұрын

So whoever told you to completely flip the rear end was messing with you. The truck would drive in reverse. Love the build. Your channel(and this truck) have caused me to search Craigslist pretty much non stop. Lowering it was life changing. Looks amazing

@areess6209 Жыл бұрын

Flipping the axle means putting the axle on top of the springs instead of under the springs....

@mattduncan2821 Жыл бұрын

@@areess6209 in the video he talks about not just putting the axle above the spring but also flipping it upside down so that the locating pin would fit in the perch on the axle tube, this would cause the vehicle to go reverse when in drive.

@areess6209 Жыл бұрын

Seriously???? Yeah that wouldn't work. I'm digging around trying to find out how to lower the front of a 67 f100.

@jacksonschubert2063 5 жыл бұрын

dang poor f100 guys with i beam front suspension and leaf spring rear on my c10 its double wishbone front and coil rear so you just cut all of them or get a cheap lowering spring for all 4 corners