Slipper clutch 101

Рет қаралды 4,999

Күн бұрын

In this video AJ covers the basics for the internal slipper clutch found in a lot of today's RCs. There are many types and applications for this device and AJ gives you the tools you need to understand and adjust the slipper to get the most out of your RC experience. Come along as we explain out take on the Slipper Clutch and what we use it for.
Music:
Epidemic Sound:
(Rockin' for decades), You'll learn
(Hampus Naeselius), They are coming
Videvo music:
(Drafting the blueprint), Trademark quality

Пікірлер: 42

@JohnLawrence-jd6bh 10 күн бұрын

Great tutorial! At 61yo. Purchased my first car. (Typhon3s). Into it for 2 weeks😊. Your vids. have helped tremendously to understand the maintenance so I can enjoy the life . Going to go burn some packs. Thanks for all your help!

@Hungrybird474 22 күн бұрын

Good solid advice in this channel 👍

@SnoriRC Жыл бұрын

Slipper as a traction control system. Very informative video AJ. Beautifully explained. 🇬🇧

@LyrickCZE Жыл бұрын

Best video about slipper clutch I have seen. Thank you, sir!

@mikebrown3684 5 ай бұрын

U break this down so well. It's like how Barney, the purple dinosaur, can get a toddler to singing the abc song. Sheew.. thank u for speaking slowly and for being a well-spoken person period. I struggle so bad with my slipper clutches, but i have understood everything u have spoken about!!!🏆🏆

@AJJAMStudios 5 ай бұрын

I’m so glad we could help 😎👍

@Krapper515 Жыл бұрын

This was an awesome video. I have been curious about how slippers work, but never cared to research it. But this is great because I'm about to buy an ARRMA Senton 3S and I have many different surfaces. I can now figure out how to set the slipper for each environment! Thank you AJ! Love the content man!

@nathanwirth9906 Жыл бұрын

Nice job man. I knew how they worked but didn’t realize why they were needed. Very cool!! 👍

@rbuchanan3995 2 ай бұрын

ty great info and easy to follow

@dankforest Жыл бұрын

Definitely subbing. This is best channel for nubs like me!

@joec.6012 Жыл бұрын

AJ. Yes that would be great. BTW I am a recent subscriber and I think your content is excellent. Very informative!!👍

@Patrik_78 Жыл бұрын

I must say that I really like this channel. Very good explanation.

@stephaneboudreau1088 Жыл бұрын

Love the 101 series, keep them coming!

@bluesdragon64 Жыл бұрын

Very informative! I believe I actually understand it much better. Thanks AJ!

@AJJAMStudios Жыл бұрын

Glad it was helpful!

@markmerrin1606 Жыл бұрын

Very informative AJ...thank you very mate👍🇬🇧😎

@777beanz Жыл бұрын

Great video ✊💪🏽 thanks

@Big_Gazzz-RC Жыл бұрын

Great video AJ👍👍

@someonewhocares5712 Жыл бұрын

Thanks for sharing😊😊😊😊😊😊😊

@appleslider999 Жыл бұрын

🤩👍👍👍

@Krapper515 Жыл бұрын

Hey AJ! I have been loving your videos recently. I was wondering if you'd be up to get the V3 ARRMA Senton 3S? They have lots of upgrades over the old ones and I really want to see your opinion on it! Thanks AJ 👍

@conandude76 Жыл бұрын

I've been looking everywhere for a guide on upgrading the vorteks boost 4x2 mega 550 brushed to the blx motor / esc and can't find it. Have you covered that and I just am not seeing it, or can you suggest a vid?

@jarrettjenkins5204 Жыл бұрын

Hey brother, love the channel. Where can I get one of those chassis mounted wheelie bars for the Kraton 6s?

@AJJAMStudios Жыл бұрын

They don’t make them anymore. I wish they still did. Thanks for joining us 😎👍

@joec.6012 Жыл бұрын

Hey AJ love the 101 content!! A little off topic, looking for an Arrma Kraton 6s BLX V4 front Bulkhead replacement video. Do you already have one and if not would you consider doing one?

@AJJAMStudios Жыл бұрын

Are you speaking of the forward diff housing?

@joec.6012 Жыл бұрын

AJ. Yes that would be great. BTW I am a recent subscriber and I think your content is excellent. Very informative!!👍

@jennifermichelle9043 Жыл бұрын

Great 101 if I'm just bashing on dirt would I keep the slipper a little tighter so the rear will slide when I want it to on 2wd slipper setup

@AJJAMStudios Жыл бұрын

Testing would be required to find that sweet spot but yes. 😎👍

@AsurasWrath164 Жыл бұрын

Usually on loose surfaces you tight the Slipper up, and on hightraction surfaces like asphalt or carpet you loose it a little bit. How much depends on tires, traction and power system.

@jennifermichelle9043 Жыл бұрын

Thanks

@jiffylube4296 10 ай бұрын

Will playing with the clutch help lower my motor temps? I have a Kraton 4s that I put a Mamba Monster 2 with a Castle Creations 2200Kv and it’s getting to hot. Stock gear on lose dirt, half throttle. I plan to lower the pinion gear from 13T to 12T and a motor fans to help. Plus check the software settings.

@AJJAMStudios 9 ай бұрын

It may help a little but I wouldn't slip it too much as the power sent to it will only serve to burn it out. Lowering the gearing, or lightening up the tires will help more. Thanks for asking.

@jiffylube4296 9 ай бұрын

@@AJJAMStudios Oh yeah thanks. I remember my Rustle was like that and why I crank it tight. I didn’t bring the 6s to the party just to rev the motor. Lol. I’ll have to go back thru the video to see how to test the slip and probably tighten it. It lifts on demand, but back flips are ok too. Lol.

@user-or1uu7yt9n 4 ай бұрын

Just like the limited slip differential on a 4 wheel drive vehicle only different components ?

@AJJAMStudios 4 ай бұрын

You can set the slippage. So I would say, kind of, but not really the same. The differential does way more for handling than the slipper can. Allowing the wheels to be independent and not locked together means better setups are possible. With the slipper this is not really possible. Thanks for the comment. 😎👍

@user-or1uu7yt9n 4 ай бұрын

@@AJJAMStudios Got it ! Thanks !

@RandomloserDK Жыл бұрын

I'm a bit confused by Arrma's 3sBlx slipper. The front is connected to one slipper pad while the rear is connected to 3. This makes it hard to tune. E.g. When you adjust for little rear slip, you still have massive front slip. And if you adjust for little front slip, the rear will be locked up. I'm trying to figure out another solution.

@AJJAMStudios Жыл бұрын

There is no separation, front and rear. The drive shaft is solid. The slip pads work together. It is not like a diff at all. The front and read are not independent. I hope this helps. 😎👍

@RandomloserDK Жыл бұрын

@@AJJAMStudiosIf you loosen it enough, you can turn the front and rear outputs independently by hand.

@AJJAMStudios Жыл бұрын

That is a real difference from the mega and boost stuff. I can’t believe we missed that. Give me some time to look into that. I’ll get back to you with our findings. Thank you for pointing that out 😎👍