SmackTalk RC Learning 3D #4 - Piro Flips

  Рет қаралды 58,610

SmackTalk RC / Smack FPV

SmackTalk RC / Smack FPV

Күн бұрын

Fourth episode in the series Learning 3D. Bert explains piro flips.

Пікірлер: 50
@ahwayzcool4630
@ahwayzcool4630 4 жыл бұрын
I FINALLY was able to do a good and convincing piro flip on my kraken 700 last weekend. About 10 feet off the ground. Did it for about 5 to 10 seconds. I wasn't even thinking about it, my brain and my thumbs were just in perfect sync and doing it. Surprised the hell out of me and some friends of mine. Took YEARS of practice. Felt like I hit a major milestone. :-)
@nightshadehelis9821
@nightshadehelis9821 3 жыл бұрын
How do you like your kraken? I can't decide if I want one or a RAW.
@ahwayzcool4630
@ahwayzcool4630 3 жыл бұрын
@@nightshadehelis9821 I still love my kraken, but I wanna get a Raw for my collection.
@th3s41nt
@th3s41nt 2 жыл бұрын
@@nightshadehelis9821 if your haven’t got one yet get the Raw, I came from the kraken and the Raw is so much better!
@brendanshield
@brendanshield 5 жыл бұрын
This is the best explanation on the net.... thanks for the great tips.
@davisrcfamily6388
@davisrcfamily6388 5 жыл бұрын
You do a great job explaining these techniques! Thank you for doing these videos they are a great asset for us aspiring smackdown pilots!😎👍
@dismalk_amon
@dismalk_amon 5 жыл бұрын
Bert, u are fantastic pilot! The best lesson piroflips i`ve ever seen !!!! Thx fo add. Grettings from Poland!
@mikefuchs2814
@mikefuchs2814 10 ай бұрын
Great explanation and demonstration of piro flips! Super helpful, thank you!
@jdizzle-hx2xq
@jdizzle-hx2xq 2 жыл бұрын
You did an excellent job! Thank you I feel much more comfortable in what I'm doing thanks to you guys
@tracythomasvision
@tracythomasvision 5 жыл бұрын
Amazing INFO!! Much appreciated!!
@willkillian570
@willkillian570 2 жыл бұрын
That tip on using dual rates to eliminate variability in the piro speed is pure gold!
@Thejasond1979
@Thejasond1979 5 жыл бұрын
Thank you guys for posting. Found out on your podcast
@spc22378
@spc22378 Жыл бұрын
This is a great video and clearly explained! Learned to fly in all orientations upright and inverted then moved to learning figure 8 piros CW and CCW upright and inverted, not much stationary piros like he explained...probably why I struggle a little keeping piro flips stationary. Then I was able to do pretty sloppy stationary piro flips CW and CCW. Travelling piro flips were a bit easier probably because of the figure 8 practice. Hoping to get them a bit tighter this flying season. I would like to learn how to do a proper chaos both directions eventually.
@LichaelMewis
@LichaelMewis 10 ай бұрын
How did you learn to fly upside down all orientations? I know how to fly right side up all orientations and want to take that next step. Did you use a sim or wing it on your helicopter? I'm going to buy neXt sim and start flying upside down all orientations. My ultimate goal is to do some of these cool 3D maneuvers but I have to learn all of the fundamentals first
@jasonwong93
@jasonwong93 3 ай бұрын
@@LichaelMewisthe cheapest way I know is to use SIM. Then do regular practice on it (10-20 mins per day or per sessions depending on your available time). You should see noticeable improvements after 3 weeks or so.
@xxlau4enxxrey996
@xxlau4enxxrey996 2 жыл бұрын
Great demo, I need to have a go at this. Thanks.
@jean-philippepimentel5108
@jean-philippepimentel5108 4 жыл бұрын
Very nice explanation! Thank you
@brettmccafferty7510
@brettmccafferty7510 4 жыл бұрын
Great stuff! Thanks
@Zermelo
@Zermelo 4 жыл бұрын
When you can do a piro flip, you won RC helis!
@ipadize
@ipadize 3 жыл бұрын
is it bad if i can only really fly with the tail spinning in one direction? i find it really hard to do maneuvers with cw rotation of the helicopter.
@FuentesPaolo
@FuentesPaolo 5 жыл бұрын
My Favorite Trick.... Feels like Forever ( ' ' ,)
@danialtun5431
@danialtun5431 2 жыл бұрын
Thank you for showing fly 3d.i have a 3d heli 4pcs can not flying yet 3d five years ready want to ask 3d. swift is when start on start flying time on or go up only on or pleas answer to me thank you very much Mr.
@denisfranck999
@denisfranck999 3 жыл бұрын
YOU CAN GET MY RISE Please how we configure the 3D mode IN THE RADIO AND GYRO
@huyhuynh312
@huyhuynh312 2 жыл бұрын
That 250 heli at the beginning looks amazing, wonder whats that model
@eladdov8601
@eladdov8601 Жыл бұрын
old flybarred trex 250
@joboeington1383
@joboeington1383 4 жыл бұрын
Good job!! Merci pour la qualité de tes explications !
@samsman007
@samsman007 2 жыл бұрын
This is on mode 2 stick, and it seems a lot easier to do compared to mode 1. Any guidance on mode 1?
@elitecol69
@elitecol69 2 ай бұрын
Yes, relearn to fly on mode 2. Most of the people in my club have done that and wished they did it earlier.
@samsly9708
@samsly9708 3 жыл бұрын
well said sport..!
@victorblack7104
@victorblack7104 2 жыл бұрын
Missed first 3. How do I start this hobby? Signed, Slot Car Man
@jakelang4387
@jakelang4387 2 жыл бұрын
So freaking hard man,,I can't fly invert tail in for some dumb reason but I can fly tail out inverted just like I was right side up..but I'm stuck here ,,need a sim bad ,but I think I e done good without one ..
@gabeloftus9773
@gabeloftus9773 4 жыл бұрын
My brain hurts now 😩
@scottwalker6257
@scottwalker6257 3 жыл бұрын
Lol yup
@nightshadehelis9821
@nightshadehelis9821 3 жыл бұрын
I want to know how many helis these pros have smashed before they got this good. I can do sloppy piropflips, but I've smashed a Trex 550 DFC, one Blade 300x, Four mPCXs, three nanos, and three goblin 500s in the process. I recently purchased Real Flight and AccuRC and refuse to physically touch a heli until I'm 100% confident. Unfortunately, it's so much harder when you're flying the real thing. Nerves always get me, especially when people are watching. You almost have to not care about smashing $2k.
@jakelang4387
@jakelang4387 2 жыл бұрын
I've gone through my share of bl2 and still can't do one .I need a sim or something ..,it seems I'm closer to doing one on my m2 than anything else but I've had to save it many times...I'm not crashing my m2 and 1 ..lol ..
@nickytheyahoo_
@nickytheyahoo_ 2 жыл бұрын
Like Bert says , go slow….they’ve been flying for YEARS , and have been through a lot of parts I’m sure . This dude owns a servo company, so they’re in “ the business”. Keep at it .
@mikefuchs2814
@mikefuchs2814 10 ай бұрын
Get an OMP M2 or similar, hit throttle hold before crashing, damage is minimal, repairs are easy and inexpensive. Builds confidence. Practice new moves in the sim then try it with small heli.
@mark675
@mark675 7 ай бұрын
It's not just the money either it's sitting and repairing and setting it up each time 😂
@neilgreene
@neilgreene 3 жыл бұрын
These were the days! What is Bert doing these days?
@BertKammerer
@BertKammerer 3 жыл бұрын
I own BK Hobbies (bkhobbies.com) as well as various brands within the hobby. Indeed those were very fun days.
@neilgreene
@neilgreene 3 жыл бұрын
@@BertKammerer Hats off to continued success and maybe some rebirth to some hobby past favorites.
@BertKammerer
@BertKammerer 3 жыл бұрын
@@neilgreene Thank you Neil!
@pinarellocampagnolo3875
@pinarellocampagnolo3875 4 жыл бұрын
This Adds a Lot to my 3d. Going to try it one day. Thanks Bert. 72320247a.
@NiCadHeliPilot
@NiCadHeliPilot 4 жыл бұрын
Gotta admit, I'm startin' to miss the ol' flybar.
@NicB-Creations
@NicB-Creations 5 жыл бұрын
A flybar in 2018? Respect!
@BrandonGTP
@BrandonGTP 4 жыл бұрын
lol this is old, they reuploaded it in 2018
@superdon1chw
@superdon1chw 3 жыл бұрын
I think I am going to need a bigger brain
@scottwalker6257
@scottwalker6257 3 жыл бұрын
Everyone else:. 'amazing explanation, thanks!' Me having watched it 3 times: 'Er wot?'
@jinkslate4761
@jinkslate4761 3 жыл бұрын
🇺🇾🇺🇾🇺🇾SAPatrolingNEE NEE NON NONLibertyMutualINSURANCHPresentedBySuYouCaySettingHENRENYear2021Year2022🇺🇾🇺🇾🇺🇾🇺🇾🇺🇾🇺🇾
@zmanphx
@zmanphx 8 ай бұрын
Practice many sessions on sim before doing it for reals.
SmackTalk RC Learning 3D #5 - Transitions
16:22
SmackTalk RC / Smack FPV
Рет қаралды 24 М.
SmackTalk RC Learning 3D #1 - The Basics
23:15
SmackTalk RC / Smack FPV
Рет қаралды 41 М.
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 32 МЛН
DEFINITELY NOT HAPPENING ON MY WATCH! 😒
00:12
Laro Benz
Рет қаралды 58 МЛН
RealFlight Helicopter How-To | Half Piro Flip
5:15
RealFlight RC Flight Simulator
Рет қаралды 2,8 М.
SmackTalk RC Learning 3D #2 - Flips, Hurricanes, and Funnels
15:07
SmackTalk RC / Smack FPV
Рет қаралды 34 М.
idiot cuts grass with $3000 Carbon Fiber RC Helicopter
16:35
Kevin Talbot
Рет қаралды 556 М.
Inside the B-17 Ball Turret
18:59
Blue Paw Print
Рет қаралды 2 МЛН
SmackTalk RC Episode #1 - Everything About Nitro Engines
45:39
SmackTalk RC / Smack FPV
Рет қаралды 12 М.
SmackTalk RC 3D Tips #3 - Pinching vs Thumbs
31:06
SmackTalk RC / Smack FPV
Рет қаралды 11 М.
SmackTalk RC Learning 3D #3 - Rainbows and Tick Tocks
14:55
SmackTalk RC / Smack FPV
Рет қаралды 26 М.
SmackTalk RC 3D Tips #1 - Circus Tricks
30:45
SmackTalk RC / Smack FPV
Рет қаралды 11 М.
Top 50 Amazon Prime Day 2024 Deals 🤑 (Updated Hourly!!)
12:37
The Deal Guy
Рет қаралды 1,4 МЛН
Kumanda İle Bilgisayarı Yönetmek #shorts
0:29
Osman Kabadayı
Рет қаралды 898 М.
Samsung Galaxy 🔥 #shorts  #trending #youtubeshorts  #shortvideo ujjawal4u
0:10
Ujjawal4u. 120k Views . 4 hours ago
Рет қаралды 8 МЛН
Как удвоить напряжение? #электроника #умножитель
1:00
Hi Dev! – Электроника
Рет қаралды 968 М.